Vulnerabilidades

The SMBus driver API exposed smbus_smbalert_remove_cb() and smbus_host_notify_remove_cb() as Zephyr syscalls. Their verifiers in drivers/smbus/smbus_handlers.c validated only the dev argument with K_SYSCALL_OBJ(dev, K_OBJ_DRIVER_SMBUS) and forwarded the caller-supplied struct smbus_callback *cb pointer into…

The MCUmgr SMP-over-console transport decodes a base64 frame, reads a 16-bit packet length from it, verifies a CRC and then unconditionally strips the trailing CRC with rx_ctxt->nb->len -= 2U; in mcumgr_serial_process_frag() (subsys/mgmt/mcumgr/transport/src/serial_util.c). mcumgr_serial_extract_len() accepted any…

parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with block_ctx->ctx.block_size = block_size before inspecting…

The native BSD-socket layer recorded a pending asynchronous socket error by type-punning it into struct net_context's void user_data field (ctx->user_data = INT_TO_POINTER(-status) in zsock_accepted_cb(), zsock_received_cb(), zsock_connected_cb() and zsock_close_ctx() in subsys/net/lib/sockets/sockets_inet.c), reading…

The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k once per path character without ever testing it against the…

ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN…

The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to…

The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to…

The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it executed *handle = sqe, storing the kernel address of the…

The default AEAD nonce provider for the PSA Internal Trusted Storage transform module, secure_storage_its_transform_aead_get_nonce() in subsys/secure_storage/src/its/transform/aead_get.c, stores its nonce counter in unsynchronized function-local static variables (s_nonce and s_nonce_initialized). Every ITS write…

The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in…

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short…

net_icmpv6_send_error() in subsys/net/ip/icmpv6.c implemented only one of the three RFC 4443 section 2.4 suppression rules (do not answer an ICMPv6 error with an ICMPv6 error). It did not check whether the triggering packet's source address identifies a single node (rule e.6) or whether the packet was sent to a…

gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock identity against the local one. The loop bound was taken solely from the attacker-controlled wire field announce->steps_removed (accepted up to 254), never from…

gptp_handle_msg() in subsys/net/l2/ethernet/gptp/gptp.c dereferenced the gPTP header returned by GPTP_HDR() and switched on hdr->message_type without first checking that the received frame carries at least sizeof(struct gptp_hdr) (34) bytes of payload. The header accessor gptp_get_hdr() deliberately never fails for a…

The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is…

Zephyr's TLS socket layer in subsys/net/lib/sockets/sockets_tls.c keeps a single process-global array, client_cache, of cached client sessions that is shared by every TLS socket context. The functions that mutate and read it — tls_session_save(), tls_session_get(), tls_session_cache_reset(), and the settings restore…

net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_get() % (max_reachable - min_reachable), where min_reachable = base/2 and max_reachable = 3*base/2 using integer division. When base_reachable_time is 1, both…

The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func->cis.max_blk_size) as the per-iteration step. The value func->cis.max_blk_size is decoded directly from the SDIO card's CIS FUNCE tuple in sdio_decode_cis()…

The mcumgr SMP settings-management group handlers settings_mgmt_read(), settings_mgmt_write(), and settings_mgmt_delete() in subsys/mgmt/mcumgr/grp/settings_mgmt/src/settings_mgmt.c allocate a key_name buffer (and, for read, a data buffer) via k_malloc() when CONFIG_MCUMGR_GRP_SETTINGS_BUFFER_TYPE_HEAP is enabled,…

The MQTT-SN client keepalive handler process_ping() in subsys/net/lib/mqtt_sn/mqtt_sn.c removes the gateway record after PINGREQ retries are exhausted. It invoked SYS_SLIST_PEEK_HEAD_CONTAINER(&client->gateways, gw, next) but discarded the result. That macro is a pure expression that does not assign to gw, so gw…

The Bluetooth Classic (BR/EDR) L2CAP receive handler bt_l2cap_br_recv() in subsys/bluetooth/host/classic/l2cap_br.c dispatched inbound data PDUs based only on the destination channel ID, without checking that the target channel had reached the BT_L2CAP_CONNECTED state. A dynamic channel is assigned its RX CID and…

The Zephyr Project Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘message’ parameter in all versions up to, and including, 3.3.205 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Custom-level access and above, to…

net_ipv6_send_ns() in subsys/net/ip/ipv6_nbr.c allocates a transmit net_pkt for a Neighbor Solicitation. When it is called with a data packet pending on an unresolved neighbor and that neighbor's pending_queue is already non-empty (an NS is already outstanding), the function appends the data packet and returns early…

When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the local stack, the code called eth_bridge_handle_locally() and…