Vulnerabilidades

The Frontier X2 device allows unauthenticated BLE read/write access to critical GATT characteristics without enforcing pairing authentication or authorization. This allows attackers within BLE range to perform unauthorized control of device functions, including starting/stopping activities, triggering vibrations,…

Deserialization of Untrusted Data vulnerability in VictorThemes Seil seil allows Object Injection.This issue affects Seil: from n/a through <= 1.7.1.

There exists a heap buffer overflow vulnerable in Abseil-cpp. The sized constructors, reserve(), and rehash() methods of absl::{flat,node}hash{set,map} did not impose an upper bound on their size argument. As a result, it was possible for a caller to pass a very large size that would cause an integer overflow when…

An issue in Infotel Conseil GLPI v.10.X.X and after allows a remote attacker to execute arbitrary code via the insufficient validation of user-supplied input.

SEIL/X 4.60 to 5.72, SEIL/B1 4.60 to 5.72, SEIL/x86 3.20 to 5.72, SEIL/BPV4 5.00 to 5.72 allows remote attackers to cause a temporary failure of the device's encrypted communications via a specially crafted packet.

SEIL/x86 Fuji 1.70 to 5.62, SEIL/BPV4 5.00 to 5.62, SEIL/X1 1.30 to 5.62, SEIL/X2 1.30 to 5.62, SEIL/B1 1.00 to 5.62 allows remote attackers to cause a denial of service via specially crafted IPv4 UDP packets.

npppd in the PPP Access Concentrator (PPPAC) on SEIL SEIL/x86 Fuji routers 1.00 through 3.30, SEIL/X1 routers 3.50 through 4.70, SEIL/X2 routers 3.50 through 4.70, and SEIL/B1 routers 3.50 through 4.70 allows remote attackers to cause a denial of service (infinite loop and device hang) via a crafted SSTP packet.

The (1) PPP Access Concentrator (PPPAC) and (2) Dial-Up Networking Internet Initiative Japan Inc. SEIL series routers SEIL/x86 Fuji 1.00 through 3.22; SEIL/X1, SEIL/X2, and SEIL/B1 1.00 through 4.62; SEIL/Turbo 1.82 through 2.18; and SEIL/neu 2FE Plus 1.82 through 2.18 allow remote attackers to cause a denial of…

Internet Initiative Japan Inc. SEIL Series routers SEIL/X1 2.50 through 4.62, SEIL/X2 2.50 through 4.62, SEIL/B1 2.50 through 4.62, and SEIL/x86 Fuji 1.70 through 3.22 allow remote attackers to cause a denial of service (CPU and traffic consumption) via a large number of NTP requests within a short time, which causes…

The PPP Access Concentrator (PPPAC) on SEIL SEIL/x86 routers 1.00 through 3.10, SEIL/X1 routers 1.00 through 4.50, SEIL/X2 routers 1.00 through 4.50, SEIL/B1 routers 1.00 through 4.50, SEIL/Turbo routers 1.80 through 2.17, and SEIL/neu 2FE Plus routers 1.80 through 2.17 allows remote attackers to cause a denial of…

The PPP Access Concentrator (PPPAC) in Internet Initiative Japan Inc. SEIL/x86 1.00 through 2.80, SEIL/X1 1.00 through 4.30, SEIL/X2 1.00 through 4.30, SEIL/B1 1.00 through 4.30, SEIL/Turbo 1.80 through 2.15, and SEIL/neu 2FE Plus 1.80 through 2.15 generates predictable random numbers, which allows remote attackers to…

Buffer overflow in the PPP Access Concentrator (PPPAC) on the SEIL/x86 with firmware before 2.82, SEIL/X1 with firmware before 4.32, SEIL/X2 with firmware before 4.32, SEIL/B1 with firmware before 4.32, SEIL/Turbo with firmware before 2.16, and SEIL/neu 2FE Plus with firmware before 2.16 allows remote attackers to…

SEIL routers with firmware SEIL/x86 1.00 through 2.35, SEIL/X1 2.30 through 3.75, SEIL/X2 2.30 through 3.75, and SEIL/B1 2.30 through 3.75, when the http-proxy and application-gateway features are enabled, do not properly handle the CONNECT command, which allows remote attackers to bypass intended URL restrictions via…

Buffer overflow in the PPP Access Concentrator (PPPAC) on the SEIL/x86 with firmware 1.00 through 1.61, SEIL/B1 with firmware 1.00 through 3.11, SEIL/X1 with firmware 1.00 through 3.11, SEIL/X2 with firmware 1.00 through 3.11, SEIL/Turbo with firmware 1.80 through 2.10, and SEIL/neu 2FE Plus with firmware 1.80 through…

The IPv6 Unicast Reverse Path Forwarding (RPF) implementation on the SEIL/X1, SEIL/X2, and SEIL/B1 routers with firmware 1.00 through 2.73, when strict mode is used, does not properly drop packets, which might allow remote attackers to bypass intended access restrictions via a spoofed IP address.

The (1) CHAP and (2) MS-CHAP-V2 authentication capabilities in the PPP Access Concentrator (PPPAC) function in Internet Initiative Japan SEIL/B1 firmware 1.00 through 2.52 use the same challenge for each authentication attempt, which allows remote attackers to bypass authentication via a replay attack.

Internet Initiative Japan SEIL/X1, SEIL/X2, and SEIL/B1 firmware 2.30 through 2.51, when NAT is enabled, allows remote attackers to cause a denial of service (system restart) via crafted GRE packets.

Buffer overflow in the URL filtering function in Internet Initiative Japan SEIL/X1, SEIL/X2, and SEIL/B1 firmware 2.40 through 2.51 allows remote attackers to execute arbitrary code via unspecified vectors.