CVE-2026-98715
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN
Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush.
Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid().
Read full descriptionShow less
Deliberately don't bother saving/restoring the "old" tlb_ctl on failure, in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next successful run of the VMCB *may* unnecessarily flush all ASIDs, which strictly speaking could result in noisy neighbor issues. However, the fact that new_asid() is already guest-triggerable, because of KVM's flawed behavior of clearing the ASID on emulated INIT, means that a guest can already trigger a flush of all ASIDs at roughly the same rate. And once KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID to each vCPU, this flaw goes away.
CVSS
NVD hasn't assigned a CVSS score to this CVE (common since the April 2026 policy change).
Exploitation probability (EPSS)
- Probability of exploitation in the next 30 days
- 0.19 %
- Percentile among all scored CVEs
- 8
- Score date
- 10/20/2026
EPSS (Exploit Prediction Scoring System, FIRST) estimates how likely a vulnerability is to be exploited in the wild within 30 days. It complements CVSS (impact) and CISA KEV (confirmed exploitation).
Affected technologies (1)
⚠ AI-inferred from the description — NVD hasn't analyzed this CVE yet, these aren't verified CPEs.
References
Raw JSON (NVD)
Show
{
"id": "CVE-2026-98715",
"cveTags": [],
"metrics": {},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "38e5e92fe8c02a8766459d505423b855caf9af1f",
"lessThan": "fd873c3d1b5240e80365f09e758e8c96b88a7cdb",
"versionType": "git"
},
{
"status": "affected",
"version": "38e5e92fe8c02a8766459d505423b855caf9af1f",
"lessThan": "60d93c27859fb3ec5b5a689e24de303f166477d0",
"versionType": "git"
}
],
"programFiles": [
"arch/x86/kvm/svm/svm.c",
"arch/x86/kvm/svm/svm.h"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.38"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "2.6.38",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "7.2.10",
"versionType": "semver",
"lessThanOrEqual": "7.2.*"
},
{
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"arch/x86/kvm/svm/svm.c",
"arch/x86/kvm/svm/svm.h"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2026-10-18T16:17:25.050",
"references": [
{
"url": "https://git.kernel.org/stable/c/60d93c27859fb3ec5b5a689e24de303f166477d0",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/fd873c3d1b5240e80365f09e758e8c96b88a7cdb",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Received",
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nKVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN\n\nDon't reset the VMCB's TLB control back to \"do nothing\" on a failed VMRUN,\nas empirical testing shows that the CPU performs the requested TLB flush if\nand only if VMRUN is successful, i.e. clearing TLB control on a failed\nVMRUN effectively drops a TLB flush.\n\nExplicitly track the need to flush all ASIDs on a per-CPU basis, as the\nASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus,\nthis also obviates the need to avoid clobbering FLUSH_ALL_ASID with\nTLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid().\n\nDeliberately don't bother saving/restoring the \"old\" tlb_ctl on failure,\nin quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from\nafter pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If\nVMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next\nsuccessful run of the VMCB *may* unnecessarily flush all ASIDs, which\nstrictly speaking could result in noisy neighbor issues. However, the\nfact that new_asid() is already guest-triggerable, because of KVM's flawed\nbehavior of clearing the ASID on emulated INIT, means that a guest can\nalready trigger a flush of all ASIDs at roughly the same rate. And once\nKVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID\nto each vCPU, this flaw goes away."
}
],
"lastModified": "2026-10-19T10:19:35.747",
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}