CVE-2026-97603
In the Linux kernel, the following vulnerability has been resolved:
idpf: disable DIM work before freeing q_vectors
idpf never drains the Tx/Rx DIM works before freeing the memory they live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel() ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them.
idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory: idpf_vport_intr_write_itr() writes the ITR register through q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of the freed q_vector. No configuration is needed to get there -- IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc() initialises both modes to IDPF_ITR_DYNAMIC.
Leer descripción completaMostrar menos
Draining after idpf_vport_intr_napi_dis_all() is not enough on its own. idpf_net_dim() is called from inside the "if (napi_complete_done(napi, work_done))" branch of the poll, and napi_complete_done() has already cleared NAPIF_STATE_SCHED by then. napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is still queueing the work, and a plain cancel_work_sync() would be re-armed behind the drain.
Use disable_work_sync(): schedule_work() on a work with a non-zero disable count is dropped by clear_pending_if_disabled() before __queue_work() is reached.
Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are initialised on every path that can reach the drain -- the three "goto intr_deinit" sites between idpf_vport_intr_init() and idpf_vport_intr_ena() get there without the enable side having run. Nothing re-enables them: rsrc->q_vectors is freed on every exit from idpf_vport_open() and on every idpf_vport_stop(), so the count dies with the object.
It is a race, not a deterministic failure -- net_dim() only schedules once DIM_NEVENTS events have accumulated and the profile index changes. A KASAN ifup/ifdown loop under load is the way to see it.
CVSS
NVD no ha asignado puntuación CVSS a esta CVE (habitual desde el cambio de política de abril de 2026).
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.20%
- Percentil entre todas las CVEs puntuadas: 9
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (1)
⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2026-97603",
"cveTags": [],
"metrics": {},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
"lessThan": "7d64d4c6bb6bb63b6cdb7de133c3ec48333b27b5",
"versionType": "git"
},
{
"status": "affected",
"version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
"lessThan": "7e4312953788244d47074987d40d76702cf929f1",
"versionType": "git"
},
{
"status": "affected",
"version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
"lessThan": "cd7a1598645b6917a8676b7e2efe8d97ce68a952",
"versionType": "git"
},
{
"status": "affected",
"version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
"lessThan": "7dd4c829bac2916be98a3e34b41daaba7f42b4c4",
"versionType": "git"
}
],
"programFiles": [
"drivers/net/ethernet/intel/idpf/idpf_txrx.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "6.7"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "6.7",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "6.12.112",
"versionType": "semver",
"lessThanOrEqual": "6.12.*"
},
{
"status": "unaffected",
"version": "6.18.53",
"versionType": "semver",
"lessThanOrEqual": "6.18.*"
},
{
"status": "unaffected",
"version": "7.2.7",
"versionType": "semver",
"lessThanOrEqual": "7.2.*"
},
{
"status": "unaffected",
"version": "7.3-rc3",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"drivers/net/ethernet/intel/idpf/idpf_txrx.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2026-09-25T11:17:13.393",
"references": [
{
"url": "https://git.kernel.org/stable/c/7d64d4c6bb6bb63b6cdb7de133c3ec48333b27b5",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/7dd4c829bac2916be98a3e34b41daaba7f42b4c4",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/7e4312953788244d47074987d40d76702cf929f1",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/cd7a1598645b6917a8676b7e2efe8d97ce68a952",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Received",
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nidpf: disable DIM work before freeing q_vectors\n\nidpf never drains the Tx/Rx DIM works before freeing the memory they\nlive in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they\nare queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel()\nends with kfree(rsrc->q_vectors). Nothing in the driver cancels them.\n\nidpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory:\nidpf_vport_intr_write_itr() writes the ITR register through\nq_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of\nthe freed q_vector. No configuration is needed to get there --\nIDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc()\ninitialises both modes to IDPF_ITR_DYNAMIC.\n\nDraining after idpf_vport_intr_napi_dis_all() is not enough on its own.\nidpf_net_dim() is called from inside the\n\"if (napi_complete_done(napi, work_done))\" branch of the poll, and\nnapi_complete_done() has already cleared NAPIF_STATE_SCHED by then.\nnapi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED |\nNAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is\nstill queueing the work, and a plain cancel_work_sync() would be\nre-armed behind the drain.\n\nUse disable_work_sync(): schedule_work() on a work with a non-zero\ndisable count is dropped by clear_pending_if_disabled() before\n__queue_work() is reached.\n\nMove idpf_init_dim() to idpf_vport_intr_alloc() so the works are\ninitialised on every path that can reach the drain -- the three\n\"goto intr_deinit\" sites between idpf_vport_intr_init() and\nidpf_vport_intr_ena() get there without the enable side having run.\nNothing re-enables them: rsrc->q_vectors is freed on every exit from\nidpf_vport_open() and on every idpf_vport_stop(), so the count dies with\nthe object.\n\nIt is a race, not a deterministic failure -- net_dim() only schedules\nonce DIM_NEVENTS events have accumulated and the profile index changes.\nA KASAN ifup/ifdown loop under load is the way to see it."
}
],
"lastModified": "2026-10-03T11:18:06.860",
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}