« Volver al listado

CVE-2026-90293

Estado: RecibidaAlta (7.5)—

In the Linux kernel, the following vulnerability has been resolved:

IB/isert: post the full-feature receive buffers after session registration

isert_put_login_tx() posts the full-feature receive buffers before __transport_register_session() runs, so an initiator that does not wait for the final Login Response can still have a SCSI command executed against an se_session whose se_tpg is NULL - the same oops as the previous patch, at target_submit+0xbe.

Post them from isert_get_rx_pdu(), which the previous patch already uses to send that response, and post them before that send: the receive queue is filled at the moment the initiator is told it may use it.

Leer descripción completaMostrar menos

Allocating there keeps the existing property that a memory allocation failure cannot happen once the final Login Response is on the wire.

The receive queue is already empty between the final Login Request and isert_post_recvm(); this moves the second point later, from a median of 92 us to 172 us over 1200 logins. Only an initiator that sends before it has been told to can reach that window, and on IB and RoCE its send is retried there until the buffers appear - isert_rdma_accept() asks for rnr_retry_count = 7. iWARP has no RNR flow control, so there the same send terminates the connection instead.

Measured over rxe, 400 login cycles per run, with an initiator that does not wait: an instrumented build counted no entries to isert_recv_done() before the buffers are posted in 10 runs, where that initiator oopsed 8 of 10 unpatched runs and 5 of 10 with only the previous patch.

Not tested: iWARP, discovery sessions over iSER, and real HCAs.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad de DoS en kernel Linux (AV:N, PR:N, UI:N) explotable remotamente antes de autenticación completada. Iniciador no esperante genera oops en target_submit causando denegación de servicio.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Filter Network TrafficVulnerability ScanningPrivileged Account ManagementNetwork SegmentationLimit Access to Resource Over NetworkApplication Isolation and Sandboxing

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Linux — Linux KernelAI

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-90293",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.5,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "962edb9a6b0dae09d33a677485a398fc7d55968c",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "068fe9841d2585b79d479fc7b58251d02d0b066f",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "d4f8257c3283919ca7e149381d062b9af5f7df7d",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "9c21a433022219ca899d1b3cd9049991f51a6a2c",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "9b2c61344992c8c2b883e1eebe416cc488a19390",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "6c506fee5a5f2c8719c65bcfc5e5d0862b0a1946",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "ad4492dcaf90a1d1a728ec5eef1a68ce5355027a",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b8d26b3be8b33682cf163274ed07479a70554633",
              "lessThan": "5247dde9daac7e107853b6fea043f7f47be033f7",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/infiniband/ulp/isert/ib_isert.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "3.10"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "3.10",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "5.10.270",
              "versionType": "semver",
              "lessThanOrEqual": "5.10.*"
            },
            {
              "status": "unaffected",
              "version": "5.15.221",
              "versionType": "semver",
              "lessThanOrEqual": "5.15.*"
            },
            {
              "status": "unaffected",
              "version": "6.1.188",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.157",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.110",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.52",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.2.6",
              "versionType": "semver",
              "lessThanOrEqual": "7.2.*"
            },
            {
              "status": "unaffected",
              "version": "7.3-rc1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/infiniband/ulp/isert/ib_isert.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-09-17T17:17:26.543",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/068fe9841d2585b79d479fc7b58251d02d0b066f",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/5247dde9daac7e107853b6fea043f7f47be033f7",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/6c506fee5a5f2c8719c65bcfc5e5d0862b0a1946",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/962edb9a6b0dae09d33a677485a398fc7d55968c",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/9b2c61344992c8c2b883e1eebe416cc488a19390",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/9c21a433022219ca899d1b3cd9049991f51a6a2c",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/ad4492dcaf90a1d1a728ec5eef1a68ce5355027a",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/d4f8257c3283919ca7e149381d062b9af5f7df7d",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nIB/isert: post the full-feature receive buffers after session registration\n\nisert_put_login_tx() posts the full-feature receive buffers before\n__transport_register_session() runs, so an initiator that does not wait\nfor the final Login Response can still have a SCSI command executed\nagainst an se_session whose se_tpg is NULL - the same oops as the\nprevious patch, at target_submit+0xbe.\n\nPost them from isert_get_rx_pdu(), which the previous patch already uses\nto send that response, and post them before that send: the receive queue\nis filled at the moment the initiator is told it may use it.  Allocating\nthere keeps the existing property that a memory allocation failure cannot\nhappen once the final Login Response is on the wire.\n\nThe receive queue is already empty between the final Login Request and\nisert_post_recvm(); this moves the second point later, from a median of\n92 us to 172 us over 1200 logins.  Only an initiator that sends before it\nhas been told to can reach that window, and on IB and RoCE its send is\nretried there until the buffers appear - isert_rdma_accept() asks for\nrnr_retry_count = 7.  iWARP has no RNR flow control, so there the same\nsend terminates the connection instead.\n\nMeasured over rxe, 400 login cycles per run, with an initiator that does\nnot wait: an instrumented build counted no entries to isert_recv_done()\nbefore the buffers are posted in 10 runs, where that initiator oopsed\n8 of 10 unpatched runs and 5 of 10 with only the previous patch.\n\nNot tested: iWARP, discovery sessions over iSER, and real HCAs."
    }
  ],
  "lastModified": "2026-09-18T18:17:52.310",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}