« Volver al listado

CVE-2026-90089

Estado: RecibidaAlta (7.1)—

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: btnxpuart: Validate the FW dump header length

nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it.

h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields from beyond the received data.

Leer descripción completaMostrar menos

Beyond the read itself, buf_len is what terminates a dump: a value of zero makes the driver call hci_devcd_complete() and reset the controller, so a truncated frame can end a dump early.

Use skb_pull_data() to validate and pull the FW dump header before accessing its fields. Warn and reject the chunk if the header is truncated.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad en controlador Bluetooth Linux que permite DoS (rechazo temprano de volcado) y lectura de datos en kernel vía frame ACL malformado sin validación (AV:A, impacto alto en disponibilidad).

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-90089",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.1,
          "attackVector": "ADJACENT_NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "LOW"
        },
        "impactScore": 4.2,
        "exploitabilityScore": 2.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "998e447f443f138c90faa6ff3845082af419070e",
              "lessThan": "a644b8df94966b672ac656577df98bd01bc88393",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "998e447f443f138c90faa6ff3845082af419070e",
              "lessThan": "22d419db7f9a01bea22cfcf66774d2b2fd4bb354",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "998e447f443f138c90faa6ff3845082af419070e",
              "lessThan": "060fa7592bdc043a93b6b7870f5b8551206d315d",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/bluetooth/btnxpuart.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.15"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.15",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.18.52",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.2.6",
              "versionType": "semver",
              "lessThanOrEqual": "7.2.*"
            },
            {
              "status": "unaffected",
              "version": "7.3-rc1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/bluetooth/btnxpuart.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-09-17T17:17:00.067",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/060fa7592bdc043a93b6b7870f5b8551206d315d",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/22d419db7f9a01bea22cfcf66774d2b2fd4bb354",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/a644b8df94966b672ac656577df98bd01bc88393",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nBluetooth: btnxpuart: Validate the FW dump header length\n\nnxp_process_fw_dump() pulls the ACL header off the frame and then reads\nseq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data,\nwithout checking that the ACL payload is long enough to contain it.\n\nh4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the\nnumber of payload bytes named in that header, so skb->len is 4 + dlen\nwith dlen supplied by the controller and possibly smaller than the 8\nbyte dump header, or zero. A short frame with connection handle 0xfff\ntherefore reads both fields from beyond the received data.\n\nBeyond the read itself, buf_len is what terminates a dump: a value of\nzero makes the driver call hci_devcd_complete() and reset the\ncontroller, so a truncated frame can end a dump early.\n\nUse skb_pull_data() to validate and pull the FW dump header before\naccessing its fields. Warn and reject the chunk if the header is\ntruncated."
    }
  ],
  "lastModified": "2026-09-18T18:17:41.060",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}