« Volver al listado

CVE-2026-90048

Estado: RecibidaCrítica (9.8)—

In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: fix slab-out-of-bounds write in ni_create_attr_list()

ni_create_attr_list() allocates a fixed buffer of al_aligned(record_size) (== record_size) bytes and then walks every attribute of the primary MFT record, writing one ATTR_LIST_ENTRY per attribute and advancing the cursor by le_size(name_len), with no check against the end of the buffer; the total size is only computed after the loop.

A minimum-size resident attribute occupies SIZEOF_RESIDENT (0x18 = 24) bytes on disk, but an unnamed attribute expands to le_size(0) (0x20 = 32) bytes in the list.

Leer descripción completaMostrar menos

Because the number of attributes in a record is not bounded (mi_enum_attr() accepts arbitrarily many equal-type, nameless minimum-size attributes), a crafted record packed with such attributes produces a list larger than record_size and overflows the heap buffer.

This is reachable from a crafted, loop-mounted NTFS image: opening the file and adding an attribute (e.g. via setxattr) drives ntfs_set_ea() -> ni_insert_resident() -> ni_insert_attr() -> ni_ins_attr_ext() -> ni_create_attr_list().

Size the buffer from the actual attributes instead of assuming a single record_size is always enough.

Detalles técnicos trazas, registros y código del informe original
  BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0xc48/0x1058
  Write of size 4 at addr ffff000008984c00 by task setfattr/345
   ni_create_attr_list+0xc48/0x1058
   ni_ins_attr_ext+0x510/0x7c0
   ni_insert_attr+0x3f8/0x70c
   ni_insert_resident+0xc8/0x3b0
   ntfs_set_ea+0x66c/0xd28
   ntfs_setxattr+0x4d8/0x5b0
   __arm64_sys_setxattr+0xa4/0x124
  Allocated by task 345:
   ni_create_attr_list+0x188/0x1058
  The buggy address belongs to the cache kmalloc-1k of size 1024
  (the write lands at object+1024).

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad crítica en kernel Linux (AV:N, AC:L, PR:N) explotable mediante imagen NTFS crafted montada localmente. Desbordamiento de buffer causa DoS o corrupción de memoria; impacto de disponibilidad e integridad confirmado por KASAN.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-90048",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 9.8,
          "attackVector": "NETWORK",
          "baseSeverity": "CRITICAL",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4342306f0f0d5ff4315a204d315c1b51b914fca5",
              "lessThan": "7e9aee7e4d9767cc3e423b3beecb01c7ebb6bbcd",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "4342306f0f0d5ff4315a204d315c1b51b914fca5",
              "lessThan": "fa2215cf451414b0512cd6f7d37a057893811f4d",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "4342306f0f0d5ff4315a204d315c1b51b914fca5",
              "lessThan": "d07e281f2a7710502985d6f80b95ddac8f4e81d5",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "4342306f0f0d5ff4315a204d315c1b51b914fca5",
              "lessThan": "a84f3db72561c4d9281c5ff721ce46b9ffa7f30e",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "4342306f0f0d5ff4315a204d315c1b51b914fca5",
              "lessThan": "7c4841e2a62794a3bab7c1ff0540580f387e377f",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "fs/ntfs3/frecord.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.15"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "5.15",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.6.157",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.110",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.51",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.2.5",
              "versionType": "semver",
              "lessThanOrEqual": "7.2.*"
            },
            {
              "status": "unaffected",
              "version": "7.3-rc1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "fs/ntfs3/frecord.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-09-16T11:17:18.140",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/7c4841e2a62794a3bab7c1ff0540580f387e377f",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/7e9aee7e4d9767cc3e423b3beecb01c7ebb6bbcd",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/a84f3db72561c4d9281c5ff721ce46b9ffa7f30e",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/d07e281f2a7710502985d6f80b95ddac8f4e81d5",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/fa2215cf451414b0512cd6f7d37a057893811f4d",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nfs/ntfs3: fix slab-out-of-bounds write in ni_create_attr_list()\n\nni_create_attr_list() allocates a fixed buffer of al_aligned(record_size)\n(== record_size) bytes and then walks every attribute of the primary MFT\nrecord, writing one ATTR_LIST_ENTRY per attribute and advancing the cursor\nby le_size(name_len), with no check against the end of the buffer; the\ntotal size is only computed after the loop.\n\nA minimum-size resident attribute occupies SIZEOF_RESIDENT (0x18 = 24)\nbytes on disk, but an unnamed attribute expands to le_size(0) (0x20 = 32)\nbytes in the list.  Because the number of attributes in a record is not\nbounded (mi_enum_attr() accepts arbitrarily many equal-type, nameless\nminimum-size attributes), a crafted record packed with such attributes\nproduces a list larger than record_size and overflows the heap buffer.\n\nThis is reachable from a crafted, loop-mounted NTFS image: opening the file\nand adding an attribute (e.g. via setxattr) drives ntfs_set_ea() ->\nni_insert_resident() -> ni_insert_attr() -> ni_ins_attr_ext() ->\nni_create_attr_list().\n\n  BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0xc48/0x1058\n  Write of size 4 at addr ffff000008984c00 by task setfattr/345\n   ni_create_attr_list+0xc48/0x1058\n   ni_ins_attr_ext+0x510/0x7c0\n   ni_insert_attr+0x3f8/0x70c\n   ni_insert_resident+0xc8/0x3b0\n   ntfs_set_ea+0x66c/0xd28\n   ntfs_setxattr+0x4d8/0x5b0\n   __arm64_sys_setxattr+0xa4/0x124\n  Allocated by task 345:\n   ni_create_attr_list+0x188/0x1058\n  The buggy address belongs to the cache kmalloc-1k of size 1024\n  (the write lands at object+1024).\n\nSize the buffer from the actual attributes instead of assuming a single\nrecord_size is always enough."
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, la siguiente vulnerabilidad ha sido resuelta:\n\nfs/ntfs3: corrige escritura fuera de límites de slab en ni_create_attr_list()\n\nni_create_attr_list() asigna un búfer fijo de al_aligned(record_size) (== record_size) bytes y luego recorre cada atributo del registro MFT primario, escribiendo una ATTR_LIST_ENTRY por atributo y avanzando el cursor por le_size(name_len), sin ninguna comprobación contra el final del búfer; el tamaño total solo se calcula después del bucle.\n\nUn atributo residente de tamaño mínimo ocupa SIZEOF_RESIDENT (0x18 = 24) bytes en disco, pero un atributo sin nombre se expande a le_size(0) (0x20 = 32) bytes en la lista. Debido a que el número de atributos en un registro no está limitado (mi_enum_attr() acepta un número arbitrario de atributos de tipo igual, sin nombre y de tamaño mínimo), un registro manipulado lleno de tales atributos produce una lista mayor que record_size y desborda el búfer del heap.\n\nEsto es alcanzable desde una imagen NTFS manipulada, montada en bucle: abrir el archivo y añadir un atributo (p. ej., a través de setxattr) impulsa ntfs_set_ea()  ->  ni_insert_resident()  ->  ni_insert_attr()  ->  ni_ins_attr_ext()  ->  ni_create_attr_list().\n\n  ERROR: KASAN: escritura fuera de límites de slab en ni_create_attr_list+0xc48/0x1058\n  Escritura de tamaño 4 en la dirección ffff000008984c00 por la tarea setfattr/345\n   ni_create_attr_list+0xc48/0x1058\n   ni_ins_attr_ext+0x510/0x7c0\n   ni_insert_attr+0x3f8/0x70c\n   ni_insert_resident+0xc8/0x3b0\n   ntfs_set_ea+0x66c/0xd28\n   ntfs_setxattr+0x4d8/0x5b0\n   __arm64_sys_setxattr+0xa4/0x124\n  Asignado por la tarea 345:\n   ni_create_attr_list+0x188/0x1058\n  La dirección errónea pertenece a la caché kmalloc-1k de tamaño 1024\n  (la escritura cae en object+1024).\n\nDimensionar el búfer a partir de los atributos reales en lugar de asumir que un único record_size es siempre suficiente."
    }
  ],
  "lastModified": "2026-09-28T23:10:00.143",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}