« Volver al listado

CVE-2026-89738

Estado: RecibidaAlta (7.8)—

In the Linux kernel, the following vulnerability has been resolved:

usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed

In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via mod_timer(). Both recover the same udc through container_of and dereference it on every iteration.

Neither teardown path cancels this cycle. udc is devm-allocated, so it is freed after at91udc_remove() returns, and is likewise freed when probe fails and devres runs. A timer callback or work item that is pending or running at either point dereferences the freed udc.

Leer descripción completaMostrar menos

Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and from the usb_add_gadget_udc() failure path in probe; the remaining probe error paths fail before the timer is armed. timer_shutdown_sync() waits for a running callback and clears timer->function, which makes the work handler's mod_timer() a permanent no-op; cancel_work_sync() then drains any pending or running work whose re-arm attempt now does nothing. The timer must be shut down first, since cancelling the work alone would let the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and work_struct are never initialized.

This does not require a fault; a normal driver unbind can interleave with an already queued work item.

This issue was found by an in-house static analysis tool.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Acceso local con privilegios (PR:L) en AV:L sin UI permite escalada. Impactos: DoS por use-after-free del temporizador y corrupción de memoria del dispositivo USB gadget.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Threat Intelligence ProgramFilter Network TrafficExecution PreventionApplication Isolation and SandboxingExploit ProtectionUpdate Software

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Linux — Linux KernelAI

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-89738",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4037242c4f5ff77afe61bf07ca1e8a99490219e5",
              "lessThan": "a2a602cb1e28d76a5398cec3fa21b0110385f501",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "4037242c4f5ff77afe61bf07ca1e8a99490219e5",
              "lessThan": "51a311eb97e91ce1aed3005cb71ccb2e30f8cce8",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "4037242c4f5ff77afe61bf07ca1e8a99490219e5",
              "lessThan": "557ef547d49ff5e6026a4d39bdd3113bd81d7688",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "4037242c4f5ff77afe61bf07ca1e8a99490219e5",
              "lessThan": "c27d13ce4bab80fbdf6523928071b6c24b37606c",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/usb/gadget/udc/at91_udc.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "2.6.36"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "2.6.36",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.12.109",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.50",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.2.4",
              "versionType": "semver",
              "lessThanOrEqual": "7.2.*"
            },
            {
              "status": "unaffected",
              "version": "7.3-rc1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/usb/gadget/udc/at91_udc.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-09-11T20:20:04.357",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/51a311eb97e91ce1aed3005cb71ccb2e30f8cce8",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/557ef547d49ff5e6026a4d39bdd3113bd81d7688",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/a2a602cb1e28d76a5398cec3fa21b0110385f501",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c27d13ce4bab80fbdf6523928071b6c24b37606c",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed\n\nIn polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a\nself-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and\nat91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via\nmod_timer(). Both recover the same udc through container_of and dereference\nit on every iteration.\n\nNeither teardown path cancels this cycle. udc is devm-allocated, so it is\nfreed after at91udc_remove() returns, and is likewise freed when probe\nfails and devres runs. A timer callback or work item that is pending or\nrunning at either point dereferences the freed udc.\n\nAdd at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and\nfrom the usb_add_gadget_udc() failure path in probe; the remaining probe\nerror paths fail before the timer is armed. timer_shutdown_sync() waits\nfor a running callback and clears timer->function, which makes the work\nhandler's mod_timer() a permanent no-op; cancel_work_sync() then drains\nany pending or running work whose re-arm attempt now does nothing. The\ntimer must be shut down first, since cancelling the work alone would let\nthe timer re-queue it. The guard mirrors probe: in IRQ mode the timer and\nwork_struct are never initialized.\n\nThis does not require a fault; a normal driver unbind can interleave with\nan already queued work item.\n\nThis issue was found by an in-house static analysis tool."
    }
  ],
  "lastModified": "2026-09-13T07:17:38.550",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}