CVE-2026-89139
Temporal Server compiles a Worker Controller Instance module into its Worker Service, and that module registers a compute provider named subprocess whose function is to launch a worker by running a command on the machine hosting the Worker Service. The program name and the argument vector that provider executes are taken from the compute provider configuration supplied in the caller's request rather than from operator configuration.
Leer descripción completaMostrar menos
An authenticated caller holding only a write role in a single namespace can therefore configure a worker deployment version so that the Worker Service executes a command of the caller's choosing on its own host, under the account the server process runs as. Execution is immediate rather than deferred: the configuration handler invokes every provider using the invoke strategy directly after validating the submitted specification, so no scaling decision, task arrival, or unusual request sequence is required. Because the Worker Service process holds the persistence credentials for every namespace in the cluster and the cluster's TLS material, the consequence reaches beyond the caller's namespace to the cluster as a whole. The provider is present in the official temporal-server binaries and container images for the affected releases. The only control that can keep it unreachable is the compute provider allowlist, the per-namespace dynamic configuration setting workercontroller.compute_providers.enabled, and that control does not deny by default: its default value is an unset list, and the allowlist check is skipped entirely when the value is unset, so every registered compute provider is permitted, this one included. To determine whether a deployment is affected, check the following together. The deployed Temporal Server version is 1.31.0 or later and earlier than 1.31.3. The Worker Service is running, which it is in the default service set and therefore in a stock deployment. The effective per-namespace value of workercontroller.compute_providers.enabled is either unset or contains subprocess. And authorization is configured, meaning a real authorizer and claim mapper are in place; a deployment running with no authorizer already grants every caller unrestricted access to every namespace, so it has no namespace boundary for this to cross. Note that the separate per-namespace dynamic configuration setting workercontroller.enabled does not gate the affected path. It defaults to false, and a deployment that has never set it in any namespace is still affected, which was confirmed by running an affected release with no value for that setting present anywhere in dynamic configuration. To look for a compute configuration that is already attached, call DescribeWorkerDeploymentVersion for each worker deployment version in each namespace and check whether any scaling group's compute provider type is subprocess.
CVSS
- Versión: 4.0
- Vector: CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X
- Puntuación base: 8.7
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.58%
- Percentil entre todas las CVEs puntuadas: 46
- Fecha de la puntuación: 5/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
🎯 Técnicas ATT&CK
Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.
- Explotación
T1210Exploitation of Remote Serviceslateral movement95 % - Impacto principal
T1059.003Windows Command Shellexecution95 % - Impacto secundario
T1078.004Cloud Accountsstealth · persistence · privilege escalation · initial access85 %
Autenticado explota servicio remoto Temporal Server (T1210) sin privilegios elevados pero con rol write para ejecutar comandos arbitrarios (T1059.003) bajo credenciales del proceso servidor, escalando a nivel cluster (T1078.004).
Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.
🛡️ Mitigaciones ATT&CK que cubren estas técnicas
Tecnologías afectadas (1)
⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.
CWE
- CWE-78, CWE-749, CWE-1188
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2026-89139",
"cveTags": [],
"metrics": {
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-89139",
"role": "CISA Coordinator",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "total"
}
],
"version": "2.0.3",
"timestamp": "2026-09-21T15:24:29.098568Z"
}
}
],
"cvssMetricV40": [
{
"type": "Secondary",
"source": "security@temporal.io",
"cvssData": {
"Safety": "NOT_DEFINED",
"version": "4.0",
"Recovery": "NOT_DEFINED",
"baseScore": 8.7,
"Automatable": "NOT_DEFINED",
"attackVector": "NETWORK",
"baseSeverity": "HIGH",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X",
"exploitMaturity": "NOT_DEFINED",
"providerUrgency": "NOT_DEFINED",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"attackRequirements": "NONE",
"privilegesRequired": "LOW",
"subIntegrityImpact": "NONE",
"vulnIntegrityImpact": "HIGH",
"integrityRequirement": "NOT_DEFINED",
"modifiedAttackVector": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"vulnAvailabilityImpact": "HIGH",
"availabilityRequirement": "NOT_DEFINED",
"modifiedUserInteraction": "NOT_DEFINED",
"modifiedAttackComplexity": "NOT_DEFINED",
"subConfidentialityImpact": "NONE",
"vulnConfidentialityImpact": "HIGH",
"confidentialityRequirement": "NOT_DEFINED",
"modifiedAttackRequirements": "NOT_DEFINED",
"modifiedPrivilegesRequired": "NOT_DEFINED",
"modifiedSubIntegrityImpact": "NOT_DEFINED",
"modifiedVulnIntegrityImpact": "NOT_DEFINED",
"vulnerabilityResponseEffort": "NOT_DEFINED",
"modifiedSubAvailabilityImpact": "NOT_DEFINED",
"modifiedVulnAvailabilityImpact": "NOT_DEFINED",
"modifiedSubConfidentialityImpact": "NOT_DEFINED",
"modifiedVulnConfidentialityImpact": "NOT_DEFINED"
}
}
]
},
"affected": [
{
"source": "security@temporal.io",
"affectedData": [
{
"cpes": [
"cpe:2.3:a:temporal:temporal:*:*:*:*:*:*:*:*"
],
"repo": "https://github.com/temporalio/temporal",
"vendor": "Temporal Technologies, Inc.",
"product": "Temporal Server",
"versions": [
{
"status": "affected",
"version": "1.31.0",
"lessThan": "1.31.3",
"versionType": "semver"
}
],
"packageName": "go.temporal.io/server",
"collectionURL": "https://pkg.go.dev",
"defaultStatus": "unaffected"
}
]
}
],
"published": "2026-09-21T12:17:24.440",
"references": [
{
"url": "https://github.com/temporalio/temporal-auto-scaled-workers/pull/129",
"source": "security@temporal.io"
},
{
"url": "https://github.com/temporalio/temporal/pull/12021",
"source": "security@temporal.io"
},
{
"url": "https://github.com/temporalio/temporal/releases/tag/v1.31.3",
"source": "security@temporal.io"
},
{
"url": "https://github.com/temporalio/temporal/releases/tag/v1.32.0",
"source": "security@temporal.io"
}
],
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"type": "Secondary",
"source": "security@temporal.io",
"description": [
{
"lang": "en",
"value": "CWE-78"
},
{
"lang": "en",
"value": "CWE-749"
},
{
"lang": "en",
"value": "CWE-1188"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Temporal Server compiles a Worker Controller Instance module into its Worker Service, and that module registers a compute provider named subprocess whose function is to launch a worker by running a command on the machine hosting the Worker Service. The program name and the argument vector that provider executes are taken from the compute provider configuration supplied in the caller's request rather than from operator configuration. An authenticated caller holding only a write role in a single namespace can therefore configure a worker deployment version so that the Worker Service executes a command of the caller's choosing on its own host, under the account the server process runs as. Execution is immediate rather than deferred: the configuration handler invokes every provider using the invoke strategy directly after validating the submitted specification, so no scaling decision, task arrival, or unusual request sequence is required. Because the Worker Service process holds the persistence credentials for every namespace in the cluster and the cluster's TLS material, the consequence reaches beyond the caller's namespace to the cluster as a whole. The provider is present in the official temporal-server binaries and container images for the affected releases. The only control that can keep it unreachable is the compute provider allowlist, the per-namespace dynamic configuration setting workercontroller.compute_providers.enabled, and that control does not deny by default: its default value is an unset list, and the allowlist check is skipped entirely when the value is unset, so every registered compute provider is permitted, this one included. To determine whether a deployment is affected, check the following together. The deployed Temporal Server version is 1.31.0 or later and earlier than 1.31.3. The Worker Service is running, which it is in the default service set and therefore in a stock deployment. The effective per-namespace value of workercontroller.compute_providers.enabled is either unset or contains subprocess. And authorization is configured, meaning a real authorizer and claim mapper are in place; a deployment running with no authorizer already grants every caller unrestricted access to every namespace, so it has no namespace boundary for this to cross. Note that the separate per-namespace dynamic configuration setting workercontroller.enabled does not gate the affected path. It defaults to false, and a deployment that has never set it in any namespace is still affected, which was confirmed by running an affected release with no value for that setting present anywhere in dynamic configuration. To look for a compute configuration that is already attached, call DescribeWorkerDeploymentVersion for each worker deployment version in each namespace and check whether any scaling group's compute provider type is subprocess."
}
],
"lastModified": "2026-09-22T19:40:05.870",
"sourceIdentifier": "security@temporal.io"
}