CVE-2026-80997

Estado: RecibidaAlta (7.5)—

In the Linux kernel, the following vulnerability has been resolved:

net: ipa: fix stalled modem TX queue after runtime resume

ipa_start_xmit() unconditionally stops the TX queue before calling pm_runtime_get(), relying on the wake scheduled by runtime resume (ipa_modem_wake_queue_work()) to restart it once power is ACTIVE. But that work is queued from within the runtime resume callback, before the device's power state reaches RPM_ACTIVE, so it can run while the device is still RPM_RESUMING.

Leer descripción completaMostrar menos

The wake is then consumed too early: the transmit it restarts stops the queue again, pm_runtime_get() returns -EINPROGRESS without arranging any future wake (deferred_resume exists only for RPM_SUSPENDING), and after the resume completes nothing is left to wake the queue. Transmit stalls permanently: packets pile up in the qdisc behind the stopped queue, the device runtime-suspends, and since the netdev registers no ndo_tx_timeout the watchdog never fires. Observed on SM7635 (Fairphone 6) as the cellular data path going permanently deaf within hours, RX included, since nothing resumes the suspended endpoints.

Close the window by making the wake work wait for the resume to complete (pm_runtime_get_sync()) before waking the queue. Every queue stop is then guaranteed a later wake that happens while power is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules the work. If the device could not be resumed, wake the queue anyway so pending packets are dropped by the transmit path rather than stranded.

The STARTED power flag used to narrow this window: a wake running before the transmit path's stop suppressed that stop, but only once, as the flag was cleared by the first stop it absorbed. Removing the flag made a single transmit during an in-flight resume sufficient to strand the queue, which is the form observed.

With an accelerated reproducer (autosuspend delay shortened to 5 ms, ~20 packets/s of TX), an unpatched kernel stalled three times in 230 s / 4380 packets; with this patch the same test ran 3601 s / 70298 packets without a stall.

CVSS

Versión: 3.1
Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Puntuación base: 7.5

Probabilidad de explotación (EPSS)

Probabilidad de explotación en los próximos 30 días: 0.63%
Percentil entre todas las CVEs puntuadas: 48
Fecha de la puntuación: 3/10/2026

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

ExplotaciónT1190 Exploit Public-Facing Applicationinitial access60 %
Impacto principalT1499 Endpoint Denial of Serviceimpact55 %

Inferido por reglas deterministas a partir del vector CVSS y la CWE. Solo orientativo.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Filter Network Traffic Vulnerability Scanning Privileged Account Management Network Segmentation Limit Access to Resource Over Network Application Isolation and Sandboxing

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Linux — Linux Kernel^AI

Referencias

JSON original (NVD)

Mostrar

{
  "id": "CVE-2026-80997",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.5,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "688de12f080f10dff8f3ddc80103e432ad8deb0b",
              "lessThan": "30d5226bac52073c91ce85c2dcff93b866baefdb",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "688de12f080f10dff8f3ddc80103e432ad8deb0b",
              "lessThan": "62da38b4b3a0dd74a3e0eecf4992d40385924205",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "688de12f080f10dff8f3ddc80103e432ad8deb0b",
              "lessThan": "30cef9c1229a36a9c80edb29296459849a2fbaa3",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "688de12f080f10dff8f3ddc80103e432ad8deb0b",
              "lessThan": "3cbfd627ee720f3d2460d2cbe2fe9e4130240db6",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/net/ipa/ipa_modem.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.9"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.9",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.12.109",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.50",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.2.4",
              "versionType": "semver",
              "lessThanOrEqual": "7.2.*"
            },
            {
              "status": "unaffected",
              "version": "7.3-rc1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/net/ipa/ipa_modem.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-09-11T20:19:06.740",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/30cef9c1229a36a9c80edb29296459849a2fbaa3",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/30d5226bac52073c91ce85c2dcff93b866baefdb",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/3cbfd627ee720f3d2460d2cbe2fe9e4130240db6",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/62da38b4b3a0dd74a3e0eecf4992d40385924205",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: ipa: fix stalled modem TX queue after runtime resume\n\nipa_start_xmit() unconditionally stops the TX queue before calling\npm_runtime_get(), relying on the wake scheduled by runtime resume\n(ipa_modem_wake_queue_work()) to restart it once power is ACTIVE.\nBut that work is queued from within the runtime resume callback,\nbefore the device's power state reaches RPM_ACTIVE, so it can run\nwhile the device is still RPM_RESUMING.  The wake is then consumed\ntoo early: the transmit it restarts stops the queue again,\npm_runtime_get() returns -EINPROGRESS without arranging any future\nwake (deferred_resume exists only for RPM_SUSPENDING), and after the\nresume completes nothing is left to wake the queue.  Transmit stalls\npermanently: packets pile up in the qdisc behind the stopped queue,\nthe device runtime-suspends, and since the netdev registers no\nndo_tx_timeout the watchdog never fires.  Observed on SM7635\n(Fairphone 6) as the cellular data path going permanently deaf\nwithin hours, RX included, since nothing resumes the suspended\nendpoints.\n\nClose the window by making the wake work wait for the resume to\ncomplete (pm_runtime_get_sync()) before waking the queue.  Every\nqueue stop is then guaranteed a later wake that happens while power\nis ACTIVE; a transmit racing a new suspend/resume cycle re-schedules\nthe work.  If the device could not be resumed, wake the queue anyway\nso pending packets are dropped by the transmit path rather than\nstranded.\n\nThe STARTED power flag used to narrow this window: a wake running\nbefore the transmit path's stop suppressed that stop, but only once,\nas the flag was cleared by the first stop it absorbed.  Removing the\nflag made a single transmit during an in-flight resume sufficient to\nstrand the queue, which is the form observed.\n\nWith an accelerated reproducer (autosuspend delay shortened to 5 ms,\n~20 packets/s of TX), an unpatched kernel stalled three times in\n230 s / 4380 packets; with this patch the same test ran 3601 s /\n70298 packets without a stall."
    }
  ],
  "lastModified": "2026-09-13T07:17:06.347",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}