CVE-2026-80766
In the Linux kernel, the following vulnerability has been resolved:
HID: uclogic: fix use-after-free of inrange_timer on remove
uclogic_remove() cancels the pen in-range timer and then stops the device:
timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:
A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context.
Leer descripción completaMostrar menos
Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs.
Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.
Detalles técnicos trazas, registros y código del informe original
timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));
CVSS
NVD no ha asignado puntuación CVSS a esta CVE (habitual desde el cambio de política de abril de 2026).
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.18%
- Percentil entre todas las CVEs puntuadas: 7
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (1)
⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.
Referencias
- https://git.kernel.org/stable/c/506fd50a9027340f0e9dcc587d10ccb03312dba6
- https://git.kernel.org/stable/c/849e537160bbb77fe419ecc3944bfe125dcd441b
- https://git.kernel.org/stable/c/9d77ac82e57ead056cf3f71d347083ed9244ad90
- https://git.kernel.org/stable/c/dc5108f18f58870a8dd4203a02a47e571a2be7f0
- https://git.kernel.org/stable/c/e750cdb6de009aace3c77f37fe2173f96175e8e4
- https://git.kernel.org/stable/c/f13d0a00204b05e62336da0ab72ea0d87b56690c
- https://git.kernel.org/stable/c/f1b3ca06380531f49f988f4721d3ed30b0d7a5d2
- https://git.kernel.org/stable/c/f40243358b407aec362fe305fabfcdc94a3abd89
JSON original (NVD)
Mostrar
{
"id": "CVE-2026-80766",
"cveTags": [],
"metrics": {},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "f40243358b407aec362fe305fabfcdc94a3abd89",
"versionType": "git"
},
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "dc5108f18f58870a8dd4203a02a47e571a2be7f0",
"versionType": "git"
},
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "9d77ac82e57ead056cf3f71d347083ed9244ad90",
"versionType": "git"
},
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "e750cdb6de009aace3c77f37fe2173f96175e8e4",
"versionType": "git"
},
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "849e537160bbb77fe419ecc3944bfe125dcd441b",
"versionType": "git"
},
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "f1b3ca06380531f49f988f4721d3ed30b0d7a5d2",
"versionType": "git"
},
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "f13d0a00204b05e62336da0ab72ea0d87b56690c",
"versionType": "git"
},
{
"status": "affected",
"version": "01309e29eb95c16bd48984f2589fad0cbf5e27d1",
"lessThan": "506fd50a9027340f0e9dcc587d10ccb03312dba6",
"versionType": "git"
}
],
"programFiles": [
"drivers/hid/hid-uclogic-core.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "5.1"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "5.1",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "5.15.220",
"versionType": "semver",
"lessThanOrEqual": "5.15.*"
},
{
"status": "unaffected",
"version": "6.1.187",
"versionType": "semver",
"lessThanOrEqual": "6.1.*"
},
{
"status": "unaffected",
"version": "6.6.156",
"versionType": "semver",
"lessThanOrEqual": "6.6.*"
},
{
"status": "unaffected",
"version": "6.12.108",
"versionType": "semver",
"lessThanOrEqual": "6.12.*"
},
{
"status": "unaffected",
"version": "6.18.47",
"versionType": "semver",
"lessThanOrEqual": "6.18.*"
},
{
"status": "unaffected",
"version": "7.1.11",
"versionType": "semver",
"lessThanOrEqual": "7.1.*"
},
{
"status": "unaffected",
"version": "7.2.1",
"versionType": "semver",
"lessThanOrEqual": "7.2.*"
},
{
"status": "unaffected",
"version": "7.3-rc1",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"drivers/hid/hid-uclogic-core.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2026-09-04T16:18:01.923",
"references": [
{
"url": "https://git.kernel.org/stable/c/506fd50a9027340f0e9dcc587d10ccb03312dba6",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/849e537160bbb77fe419ecc3944bfe125dcd441b",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/9d77ac82e57ead056cf3f71d347083ed9244ad90",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/dc5108f18f58870a8dd4203a02a47e571a2be7f0",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/e750cdb6de009aace3c77f37fe2173f96175e8e4",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/f13d0a00204b05e62336da0ab72ea0d87b56690c",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/f1b3ca06380531f49f988f4721d3ed30b0d7a5d2",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/f40243358b407aec362fe305fabfcdc94a3abd89",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Received",
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nHID: uclogic: fix use-after-free of inrange_timer on remove\n\nuclogic_remove() cancels the pen in-range timer and then stops the\ndevice:\n\n\ttimer_delete_sync(&drvdata->inrange_timer);\n\thid_hw_stop(hdev);\n\ntimer_delete_sync() only guarantees the timer is idle at that instant.\nuclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop()\nstops the transport several lines later, and every report with\npen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:\n\n\tmod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));\n\nA report landing between the timer_delete_sync() call and the transport\nteardown in hid_hw_stop() re-arms inrange_timer after it was cancelled.\nuclogic_remove() then returns and the devm drvdata is freed, while\nhid_hw_stop() has already freed the input device drvdata->pen_input\npoints at, so when the timer fires ~100 ms later\nuclogic_inrange_timeout() dereferences freed memory -- a use-after-free\nin timer-softirq context.\n\nSwapping the two calls is not a fix: stopping the device first frees\ndrvdata->pen_input via hidinput_disconnect() while the timer may still\nbe pending, so a timer already armed before removal fires on the freed\ninput device in the window before timer_delete_sync() runs.\n\nUse timer_shutdown_sync() before hid_hw_stop() instead. It cancels the\ntimer, waits for a running callback while pen_input is still valid, and\nprevents any further re-arming -- a later mod_timer() from an in-flight\nreport is silently ignored -- so the timer is provably dead before\nhid_hw_stop() frees the inputs. This is the ordering the timer core\ndocuments for this \"timer re-armed from another path\" teardown case."
}
],
"lastModified": "2026-09-04T16:18:01.923",
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}