« Volver al listado

CVE-2026-80350

Estado: AplazadaAlta (7.1)—

OneUptime's webhook target check rejects private and loopback addresses given in IPv4 form and a small set of IPv6 forms, but has no case for the IPv4-mapped IPv6 range. The webhook delivery path calls SSRFProtection.validateWebhookTargetIsSafe, and the host-literal screening inside Common/Server/Utils/SSRFProtection.ts, performed by isBlockedHostnameLiteral, rejects private and loopback IPv4 ranges and tests an IPv6 value against the unspecified address, the loopback, the link-local prefix and the unique-local prefixes. A value such as [::ffff:127.0.0.1] matches none of them.

Leer descripción completaMostrar menos

The value is also recognised as an address literal rather than a name, so the path that re-checks addresses obtained from resolution is not taken. The HTTP client treats the mapped form as the embedded IPv4 address and connects to it, so an authenticated project member who can configure a webhook can direct the server at loopback services, private network ranges and link-local metadata endpoints, and the response is recorded where the webhook result can be read. Version 12.0.7 adds handling for the mapped range.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

CWE-918 SSRF remoto requiere PR:L (autenticación). Evasión de validación de direcciones IPv6 mapeadas permite acceso a servicios loopback privados. Impacto: proxy de tráfico (T1090.004) y exfiltración de metadatos/credenciales de endpoints internos.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Disable or Remove Feature or ProgramVulnerability ScanningThreat Intelligence ProgramSSL/TLS InspectionPrivileged Account ManagementNetwork Segmentation

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Hackerbay — OneuptimeAI

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-80350",
  "cveTags": [],
  "metrics": {
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-80350",
          "role": "CISA Coordinator",
          "options": [
            {
              "exploitation": "poc"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "version": "2.0.3",
          "timestamp": "2026-08-26T13:41:15.621336Z"
        }
      }
    ],
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "disclosure@vulncheck.com",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.1,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N",
          "integrityImpact": "LOW",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "NONE",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 4.2,
        "exploitabilityScore": 2.8
      }
    ],
    "cvssMetricV40": [
      {
        "type": "Secondary",
        "source": "disclosure@vulncheck.com",
        "cvssData": {
          "Safety": "NOT_DEFINED",
          "version": "4.0",
          "Recovery": "NOT_DEFINED",
          "baseScore": 7.1,
          "Automatable": "NOT_DEFINED",
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "valueDensity": "NOT_DEFINED",
          "vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:L/VA:N/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X",
          "exploitMaturity": "NOT_DEFINED",
          "providerUrgency": "NOT_DEFINED",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "attackRequirements": "NONE",
          "privilegesRequired": "LOW",
          "subIntegrityImpact": "NONE",
          "vulnIntegrityImpact": "LOW",
          "integrityRequirement": "NOT_DEFINED",
          "modifiedAttackVector": "NOT_DEFINED",
          "subAvailabilityImpact": "NONE",
          "vulnAvailabilityImpact": "NONE",
          "availabilityRequirement": "NOT_DEFINED",
          "modifiedUserInteraction": "NOT_DEFINED",
          "modifiedAttackComplexity": "NOT_DEFINED",
          "subConfidentialityImpact": "NONE",
          "vulnConfidentialityImpact": "HIGH",
          "confidentialityRequirement": "NOT_DEFINED",
          "modifiedAttackRequirements": "NOT_DEFINED",
          "modifiedPrivilegesRequired": "NOT_DEFINED",
          "modifiedSubIntegrityImpact": "NOT_DEFINED",
          "modifiedVulnIntegrityImpact": "NOT_DEFINED",
          "vulnerabilityResponseEffort": "NOT_DEFINED",
          "modifiedSubAvailabilityImpact": "NOT_DEFINED",
          "modifiedVulnAvailabilityImpact": "NOT_DEFINED",
          "modifiedSubConfidentialityImpact": "NOT_DEFINED",
          "modifiedVulnConfidentialityImpact": "NOT_DEFINED"
        }
      }
    ]
  },
  "affected": [
    {
      "source": "disclosure@vulncheck.com",
      "affectedData": [
        {
          "repo": "https://github.com/OneUptime/oneuptime",
          "vendor": "OneUptime",
          "product": "OneUptime",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "12.0.7",
              "versionType": "semver"
            }
          ],
          "packageURL": "pkg:github/OneUptime/oneuptime",
          "collectionURL": "https://github.com/OneUptime/oneuptime",
          "defaultStatus": "unaffected"
        }
      ]
    }
  ],
  "published": "2026-08-26T10:16:43.237",
  "references": [
    {
      "url": "https://github.com/OneUptime/oneuptime",
      "source": "disclosure@vulncheck.com"
    },
    {
      "url": "https://github.com/OneUptime/oneuptime/blob/12.0.6/Common/Server/Utils/SSRFProtection.ts",
      "source": "disclosure@vulncheck.com"
    },
    {
      "url": "https://github.com/OneUptime/oneuptime/issues/2578",
      "source": "disclosure@vulncheck.com"
    },
    {
      "url": "https://github.com/OneUptime/oneuptime/security/advisories/GHSA-9g3w-r349-3vvw",
      "source": "disclosure@vulncheck.com"
    },
    {
      "url": "https://www.vulncheck.com/advisories/oneuptime-before-12.0.7-server-side-request-forgery-via-ipv4-mapped-ipv6-webhook-url",
      "source": "disclosure@vulncheck.com"
    },
    {
      "url": "https://github.com/OneUptime/oneuptime/issues/2578",
      "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0"
    },
    {
      "url": "https://github.com/OneUptime/oneuptime/security/advisories/GHSA-9g3w-r349-3vvw",
      "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0"
    }
  ],
  "vulnStatus": "Deferred",
  "weaknesses": [
    {
      "type": "Secondary",
      "source": "disclosure@vulncheck.com",
      "description": [
        {
          "lang": "en",
          "value": "CWE-918"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "OneUptime's webhook target check rejects private and loopback addresses given in IPv4 form and a small set of IPv6 forms, but has no case for the IPv4-mapped IPv6 range. The webhook delivery path calls SSRFProtection.validateWebhookTargetIsSafe, and the host-literal screening inside Common/Server/Utils/SSRFProtection.ts, performed by isBlockedHostnameLiteral, rejects private and loopback IPv4 ranges and tests an IPv6 value against the unspecified address, the loopback, the link-local prefix and the unique-local prefixes. A value such as [::ffff:127.0.0.1] matches none of them. The value is also recognised as an address literal rather than a name, so the path that re-checks addresses obtained from resolution is not taken. The HTTP client treats the mapped form as the embedded IPv4 address and connects to it, so an authenticated project member who can configure a webhook can direct the server at loopback services, private network ranges and link-local metadata endpoints, and the response is recorded where the webhook result can be read. Version 12.0.7 adds handling for the mapped range."
    }
  ],
  "lastModified": "2026-09-16T13:42:45.393",
  "sourceIdentifier": "disclosure@vulncheck.com"
}