‹ Back to list

CVE-2026-79983

Status: Undergoing AnalysisHigh (7.4)—PoC
Severity7.4High · CVSS 3.1
Exploitation probability0.52 %higher than 43% of CVEs
Active exploitationNonot in the CISA catalog
Public exploitAvailableProof of concept on GitHub (unverified)

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing.

Read full descriptionShow less

That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory.

Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

CVSS

Base score
7.4
Version
3.1
Vector
CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N

Exploitation probability (EPSS)

Probability of exploitation in the next 30 days
0.52 %
Percentile among all scored CVEs
43
Score date
10/20/2026

EPSS (Exploit Prediction Scoring System, FIRST) estimates how likely a vulnerability is to be exploited in the wild within 30 days. It complements CVSS (impact) and CISA KEV (confirmed exploitation).

Public exploits

Exploit code or detection templates are publicly available. This is not the same as confirmed active exploitation (KEV), but it raises the risk: patch with priority.

⚠️ GitHub proofs of concept are not verified: some are fake or contain malware. Never run them outside an isolated lab.

ATT&CK techniques

How this vulnerability is exploited and what the attacker gains, in MITRE ATT&CK terms.

Vector AV:N/PR:N/UI:N; un nombre de LIST remoto fuera del directorio permite a Camel leer, borrar o renombrar archivos ajenos con las credenciales del endpoint.

Inferred by our analysis agent from the official description, CVSS vector and CWE, and checked by a supervisor. May contain errors.

ATT&CK mitigations that cover these techniques

Vulnerability ScanningUser Account ManagementPrivileged Account ManagementNetwork SegmentationMulti-factor AuthenticationLimit Access to Resource Over Network

Affected technologies (1)

⚠ AI-inferred from the description — NVD hasn't analyzed this CVE yet, these aren't verified CPEs.

Apache — CamelAI

CWEs

References

Show 7 references

Raw JSON (NVD)

Show
{
  "id": "CVE-2026-79983",
  "cveTags": [],
  "metrics": {
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-79983",
          "role": "CISA Coordinator",
          "options": [
            {
              "exploitation": "poc"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "version": "2.0.3",
          "timestamp": "2026-10-20T03:55:34.627383Z"
        }
      }
    ],
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "security@apache.org",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.4,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "HIGH",
          "availabilityImpact": "NONE",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.2,
        "exploitabilityScore": 2.2
      }
    ]
  },
  "affected": [
    {
      "source": "security@apache.org",
      "affectedData": [
        {
          "vendor": "Apache Software Foundation",
          "product": "Apache Camel",
          "versions": [
            {
              "status": "affected",
              "version": "4.0.0",
              "lessThan": "4.18.5",
              "versionType": "maven"
            },
            {
              "status": "affected",
              "version": "4.19.0",
              "lessThan": "4.22.1",
              "versionType": "maven"
            },
            {
              "status": "unaffected",
              "version": "4.18.5",
              "versionType": "maven"
            },
            {
              "status": "unaffected",
              "version": "4.22.1",
              "versionType": "maven"
            },
            {
              "status": "unaffected",
              "version": "4.23.0",
              "versionType": "maven"
            }
          ],
          "packageURL": "pkg:maven/org.apache.camel/camel-ftp",
          "packageName": "org.apache.camel:camel-ftp",
          "collectionURL": "https://repo.maven.apache.org/maven2",
          "defaultStatus": "unaffected"
        }
      ]
    }
  ],
  "published": "2026-10-19T11:17:20.207",
  "references": [
    {
      "url": "https://camel.apache.org/security/CVE-2026-79983.html",
      "source": "security@apache.org"
    },
    {
      "url": "https://github.com/apache/camel/pull/25730",
      "source": "security@apache.org"
    },
    {
      "url": "https://github.com/apache/camel/pull/25745",
      "source": "security@apache.org"
    },
    {
      "url": "https://github.com/apache/camel/pull/25746",
      "source": "security@apache.org"
    },
    {
      "url": "https://github.com/apache/camel/pull/25747",
      "source": "security@apache.org"
    },
    {
      "url": "https://issues.apache.org/jira/browse/CAMEL-24487",
      "source": "security@apache.org"
    },
    {
      "url": "https://github.com/oscerd/CVE-2026-79983",
      "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0"
    }
  ],
  "vulnStatus": "Undergoing Analysis",
  "weaknesses": [
    {
      "type": "Secondary",
      "source": "security@apache.org",
      "description": [
        {
          "lang": "en",
          "value": "CWE-22"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component.\n\n\n\nThis issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.\n\n\n\nThe Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory.\n\n\n\nUpgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream."
    }
  ],
  "lastModified": "2026-10-20T14:17:01.710",
  "sourceIdentifier": "security@apache.org"
}