« Volver al listado

CVE-2026-74488

Estado: RecibidaAlta (8.8)—

In the Linux kernel, the following vulnerability has been resolved:

wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames

mwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with ieee80211_amsdu_to_8023s() and walks the resulting subframes. For each subframe it passes the subframe data pointer to mwifiex_process_tdls_action_frame(), but pairs it with skb->len, the length of the A-MSDU parent, instead of rx_skb->len:

The parent is not a valid description of that buffer, and may not be valid memory at all. ieee80211_amsdu_to_8023s() ends with

and it only sets reuse_skb when the parent is linear, is not a head_frag, and is being consumed as the *last* subframe.

Leer descripción completaMostrar menos

So when the parent does not qualify for reuse it has already been freed, and the read of skb->len is a use-after-free. When it is reused, skb->len is the length of the last subframe, applied to every earlier subframe, which over-states the buffer whenever an earlier subframe is shorter.

The callee cannot absorb a wrong length, because it derives its own ceiling from the value it is given. Each frame type computes

and the element walk is then bounded entirely against that ceiling,

so a too-large len moves end past the end of the subframe and the walk reads and copies beyond it. The A-MSDU layout is chosen by the sender, which makes the difference between the last subframe and a shorter earlier one remotely selectable. Reaching this requires TDLS support in firmware and the TDLS ethertype on the subframe.

The other caller, mwifiex_process_rx_packet(), is correct: it passes a pointer and a length that describe the same region of the RX buffer.

Pass rx_skb->len, the length of the subframe actually being parsed.

Detalles técnicos trazas, registros y código del informe original
	rx_skb = __skb_dequeue(&list);
	rx_hdr = (struct rx_packet_hdr *)rx_skb->data;
	if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
	    ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {
		mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr,
						  skb->len);
	}

	if (!reuse_skb)
		dev_kfree_skb(skb);

	ies_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN;

	for (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) {
		u8 ie_len = pos[1];

		if (pos + 2 + ie_len > end)
			break;

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad en controlador WiFi remoto (AV:A, red adyacente). La lectura out-of-bounds de memoria en procesamiento de frames TDLS permite exfiltrar datos o causar DoS por corrupción de memoria.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Vulnerability ScanningThreat Intelligence ProgramPrivileged Account ManagementNetwork SegmentationFilter Network TrafficDisable or Remove Feature or Program

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Linux — Linux KernelAI

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-74488",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 8.8,
          "attackVector": "ADJACENT_NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 2.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "707664027bb9307f7268eda403af7c4ccd9b8644",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "3b02275833a0d3e6583627995d614fa99bdf364f",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "a1f0f7dc7eb15754e6931b433edb7beb754c996a",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "25e5a3fe4f15e30f74eca42cbf3bcc3a3fbeda79",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "ece2ebb34247d573142617dfc534a9dc11ba59be",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "c9dcfe6b8b71369e1d732e2ff622c3696a2f032c",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "5a21ab03829cb6d2682c127f22e2b9cd63b4393f",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "776f742040ca5eb6242c60f29ac73d5752a5b621",
              "lessThan": "99a948382af8a225e2d5e54a7052158cd6281cc6",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.5"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "4.5",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "5.10.265",
              "versionType": "semver",
              "lessThanOrEqual": "5.10.*"
            },
            {
              "status": "unaffected",
              "version": "5.15.216",
              "versionType": "semver",
              "lessThanOrEqual": "5.15.*"
            },
            {
              "status": "unaffected",
              "version": "6.1.183",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.151",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.103",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.44",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.1.8",
              "versionType": "semver",
              "lessThanOrEqual": "7.1.*"
            },
            {
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-08-15T13:17:53.690",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/25e5a3fe4f15e30f74eca42cbf3bcc3a3fbeda79",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/3b02275833a0d3e6583627995d614fa99bdf364f",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/5a21ab03829cb6d2682c127f22e2b9cd63b4393f",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/707664027bb9307f7268eda403af7c4ccd9b8644",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/99a948382af8a225e2d5e54a7052158cd6281cc6",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/a1f0f7dc7eb15754e6931b433edb7beb754c996a",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c9dcfe6b8b71369e1d732e2ff622c3696a2f032c",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/ece2ebb34247d573142617dfc534a9dc11ba59be",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames\n\nmwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with\nieee80211_amsdu_to_8023s() and walks the resulting subframes. For each\nsubframe it passes the subframe data pointer to\nmwifiex_process_tdls_action_frame(), but pairs it with skb->len, the\nlength of the A-MSDU parent, instead of rx_skb->len:\n\n\trx_skb = __skb_dequeue(&list);\n\trx_hdr = (struct rx_packet_hdr *)rx_skb->data;\n\tif (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&\n\t    ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {\n\t\tmwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr,\n\t\t\t\t\t\t  skb->len);\n\t}\n\nThe parent is not a valid description of that buffer, and may not be\nvalid memory at all. ieee80211_amsdu_to_8023s() ends with\n\n\tif (!reuse_skb)\n\t\tdev_kfree_skb(skb);\n\nand it only sets reuse_skb when the parent is linear, is not a\nhead_frag, and is being consumed as the *last* subframe. So when the\nparent does not qualify for reuse it has already been freed, and the\nread of skb->len is a use-after-free. When it is reused, skb->len is\nthe length of the last subframe, applied to every earlier subframe,\nwhich over-states the buffer whenever an earlier subframe is shorter.\n\nThe callee cannot absorb a wrong length, because it derives its own\nceiling from the value it is given. Each frame type computes\n\n\ties_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN;\n\nand the element walk is then bounded entirely against that ceiling,\n\n\tfor (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) {\n\t\tu8 ie_len = pos[1];\n\n\t\tif (pos + 2 + ie_len > end)\n\t\t\tbreak;\n\nso a too-large len moves end past the end of the subframe and the walk\nreads and copies beyond it. The A-MSDU layout is chosen by the sender,\nwhich makes the difference between the last subframe and a shorter\nearlier one remotely selectable. Reaching this requires TDLS support in\nfirmware and the TDLS ethertype on the subframe.\n\nThe other caller, mwifiex_process_rx_packet(), is correct: it passes a\npointer and a length that describe the same region of the RX buffer.\n\nPass rx_skb->len, the length of the subframe actually being parsed."
    }
  ],
  "lastModified": "2026-08-19T17:21:05.847",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}