« Volver al listado

CVE-2026-72411

Estado: RecibidaAlta (7.8)—

In the Linux kernel, the following vulnerability has been resolved:

net: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work

Upon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports and closes the CPU port conduits:

mxl862xx_remove() unregisters the switch before cancelling this work:

dsa_unregister_switch() frees the dsa_port objects. If a CRC error schedules the work during teardown it can run after the ports have been freed and dereference freed memory.

Guard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set before dsa_unregister_switch().

Leer descripción completaMostrar menos

DSA tears the ports down under rtnl_lock(), so checking the flag under rtnl_lock() means the work either runs before teardown and sees valid ports, or runs afterwards, observes the flag and skips the walk. This mirrors the host_flood_work handler, which skips torn-down ports under rtnl_lock().

Detalles técnicos trazas, registros y código del informe original
	dsa_switch_for_each_cpu_port(dp, priv->ds)
		dev_close(dp->conduit);

	set_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags);
	cancel_delayed_work_sync(&priv->stats_work);
	dsa_unregister_switch(ds);
	mxl862xx_host_shutdown(priv);

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad local (AV:L/PR:L) sin interacción: escalada de privilegios kernel. Use-after-free permite DoS al cerrar puertos; impacto de disponibilidad en dispositivos DSA/switch.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-72411",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "a319d0c8c8cede3b63538c9f111f84651d078bf6",
              "lessThan": "cf52622fbc274eb4ca9a2066b258da2ae3dc7406",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "a319d0c8c8cede3b63538c9f111f84651d078bf6",
              "lessThan": "bcb3b8314611ed9cb4ff4bff484ef9b154fd1b83",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/net/dsa/mxl862xx/mxl862xx-host.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "7.1"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "7.1",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "7.1.5",
              "versionType": "semver",
              "lessThanOrEqual": "7.1.*"
            },
            {
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/net/dsa/mxl862xx/mxl862xx-host.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-08-15T06:22:14.720",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/bcb3b8314611ed9cb4ff4bff484ef9b154fd1b83",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/cf52622fbc274eb4ca9a2066b258da2ae3dc7406",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work\n\nUpon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports\nand closes the CPU port conduits:\n\n\tdsa_switch_for_each_cpu_port(dp, priv->ds)\n\t\tdev_close(dp->conduit);\n\nmxl862xx_remove() unregisters the switch before cancelling this work:\n\n\tset_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags);\n\tcancel_delayed_work_sync(&priv->stats_work);\n\tdsa_unregister_switch(ds);\n\tmxl862xx_host_shutdown(priv);\n\ndsa_unregister_switch() frees the dsa_port objects. If a CRC error\nschedules the work during teardown it can run after the ports have been\nfreed and dereference freed memory.\n\nGuard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set\nbefore dsa_unregister_switch(). DSA tears the ports down under\nrtnl_lock(), so checking the flag under rtnl_lock() means the work either\nruns before teardown and sees valid ports, or runs afterwards, observes\nthe flag and skips the walk. This mirrors the host_flood_work handler,\nwhich skips torn-down ports under rtnl_lock()."
    }
  ],
  "lastModified": "2026-08-17T06:19:07.950",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}