« Volver al listado

CVE-2026-72209

Estado: RecibidaCrítica (9.8)—

In the Linux kernel, the following vulnerability has been resolved:

ntfs: validate attribute values on lookup

ntfs_attr_find() and ntfs_external_attr_find() check that generic resident attribute values fit in their attribute records and that fixed-size resident values are large enough. For variable-length resident formats, however, the fixed part is not enough: embedded length fields can still point callers past the resident value.

A crafted image can set a small resident $FILE_NAME value_length while leaving file_name_length large.

Leer descripción completaMostrar menos

Callers then trust file_name_length and read past the resident value when converting or comparing the name. This was reproduced with a crafted image under KASAN as a slab-out-of-bounds read from the kmalloc-1k MFT record copy. The stack included ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(), ntfs_ucstonls(), and utf16s_to_utf8s().

Add a shared attribute value validator and use it before a lookup path can return an attribute, including the AT_UNUSED enumeration case where callers inspect returned attributes directly. The helper validates resident value bounds, minimum resident value sizes, variable-length $FILE_NAME fields, and non-resident mapping-pairs metadata that was previously checked separately in both lookup paths.

This also preserves the intended resident @val matching semantics in the external attribute lookup path. The old duplicated validation block overwrote the actual resident value length with the type-specific minimum length before comparing @val, so variable-length resident values could fail to match even when the bytes were identical. Keep the comparison on the actual value length, and make ntfs_attrlist_entry_add() compare resident attributes with lowest_vcn zero instead of reading the non-resident union member after a successful resident match.

Reject non-resident $FILE_NAME records too: the format requires $FILE_NAME to be resident and callers treat returned records as resident.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad de lectura fuera de límites (slab-out-of-bounds) en kernel Linux accesible por red sin autenticación (AV:N/PR:N/UI:N). Permite leer datos de memoria del sistema de ficheros NTFS (T1005) y potencial DoS (T1499.004).

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Filter Network TrafficVulnerability ScanningPrivileged Account ManagementNetwork SegmentationLimit Access to Resource Over NetworkApplication Isolation and Sandboxing

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Linux — Linux KernelAI

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-72209",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 9.8,
          "attackVector": "NETWORK",
          "baseSeverity": "CRITICAL",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6ceb4cc81ef3409ff79dcb959771f9110787397a",
              "lessThan": "e4c36dfac57a7261e9aeb0f3a7f30944a8aefb56",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "6ceb4cc81ef3409ff79dcb959771f9110787397a",
              "lessThan": "d5803e3345dae9c6470bb61869885236276b9a35",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "fs/ntfs/attrib.c",
            "fs/ntfs/attrlist.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "7.1"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "7.1",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "7.1.5",
              "versionType": "semver",
              "lessThanOrEqual": "7.1.*"
            },
            {
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "fs/ntfs/attrib.c",
            "fs/ntfs/attrlist.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-08-15T06:21:39.607",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/d5803e3345dae9c6470bb61869885236276b9a35",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/e4c36dfac57a7261e9aeb0f3a7f30944a8aefb56",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nntfs: validate attribute values on lookup\n\nntfs_attr_find() and ntfs_external_attr_find() check that generic\nresident attribute values fit in their attribute records and that\nfixed-size resident values are large enough. For variable-length resident\nformats, however, the fixed part is not enough: embedded length fields\ncan still point callers past the resident value.\n\nA crafted image can set a small resident $FILE_NAME value_length while\nleaving file_name_length large. Callers then trust file_name_length and\nread past the resident value when converting or comparing the name. This\nwas reproduced with a crafted image under KASAN as a slab-out-of-bounds\nread from the kmalloc-1k MFT record copy. The stack included\nntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),\nntfs_ucstonls(), and utf16s_to_utf8s().\n\nAdd a shared attribute value validator and use it before a lookup path\ncan return an attribute, including the AT_UNUSED enumeration case where\ncallers inspect returned attributes directly. The helper validates\nresident value bounds, minimum resident value sizes, variable-length\n$FILE_NAME fields, and non-resident mapping-pairs metadata that was\npreviously checked separately in both lookup paths.\n\nThis also preserves the intended resident @val matching semantics in the\nexternal attribute lookup path. The old duplicated validation block\noverwrote the actual resident value length with the type-specific minimum\nlength before comparing @val, so variable-length resident values could\nfail to match even when the bytes were identical. Keep the comparison on\nthe actual value length, and make ntfs_attrlist_entry_add() compare\nresident attributes with lowest_vcn zero instead of reading the\nnon-resident union member after a successful resident match.\n\nReject non-resident $FILE_NAME records too: the format requires\n$FILE_NAME to be resident and callers treat returned records as resident."
    }
  ],
  "lastModified": "2026-08-17T06:18:21.803",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}