« Back to list

CVE-2026-64003

Status: Awaiting AnalysisHigh (7.5)—

In the Linux kernel, the following vulnerability has been resolved:

scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues

While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared.

However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang.

Read full descriptionShow less

scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called.

CVSS

Exploitation probability (EPSS)

EPSS (Exploit Prediction Scoring System, FIRST) estimates how likely a vulnerability is to be exploited in the wild within 30 days. It complements CVSS (impact) and CISA KEV (confirmed exploitation).

🎯 ATT&CK techniques

How this vulnerability is exploited and what the attacker gains, in MITRE ATT&CK terms.

Inferred by deterministic rules from the CVSS vector and CWE. Indicative only.

🛡️ ATT&CK mitigations that cover these techniques

Affected technologies (1)

⚠ AI-inferred from the description — NVD hasn't analyzed this CVE yet, these aren't verified CPEs.

References

Raw JSON (NVD)

Show
{
  "id": "CVE-2026-64003",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.5,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "8b566edbdbfb5cde31a322c57932694ff48125ed",
              "lessThan": "15fb19af49f2073ed77fad16aaabc648b0ca6800",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "8b566edbdbfb5cde31a322c57932694ff48125ed",
              "lessThan": "d4dddfecdbb5467bef158d4e1486459808357fef",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "8b566edbdbfb5cde31a322c57932694ff48125ed",
              "lessThan": "475f2b37a78f4c698967a7f14f325f04e24c9175",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "8b566edbdbfb5cde31a322c57932694ff48125ed",
              "lessThan": "c740e13e7fe32d8e4d9a1699f65b8daf6709895a",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "8b566edbdbfb5cde31a322c57932694ff48125ed",
              "lessThan": "7205b58702273baf21d6ba7992e6ba15852325f7",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/scsi/scsi_lib.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.5"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.5",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.6.143",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.93",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.35",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.0.12",
              "versionType": "semver",
              "lessThanOrEqual": "7.0.*"
            },
            {
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/scsi/scsi_lib.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-07-19T16:17:39.933",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/15fb19af49f2073ed77fad16aaabc648b0ca6800",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/475f2b37a78f4c698967a7f14f325f04e24c9175",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/7205b58702273baf21d6ba7992e6ba15852325f7",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c740e13e7fe32d8e4d9a1699f65b8daf6709895a",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/d4dddfecdbb5467bef158d4e1486459808357fef",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Awaiting Analysis",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues\n\nWhile a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not\nset the requeue list for a requeued command to be kicked in the future.\nThe expectation is a call to scsi_run_host_queues() will kick all SCSI\ndevices once the recovery state is cleared.\n\nHowever, scsi_run_host_queues() uses shost_for_each_device() which uses\nscsi_device_get() and so will ignore devices in a partially removed\nstate like SDEV_CANCEL. But these devices may also have requeued\nrequests, leaving their requests stuck from not being kicked and causing\nthe removal process of the device to hang.\n\nscsi_run_host_queues() needs to run against more devices than the macro\nshost_for_each_device() allows. Instead of using the too limiting\nscsi_device_get() state checks, only ignore devices in SDEV_DEL state or\nwhen unable to acquire a reference. Attempt to run the queues for all\nother devices when scsi_run_host_queues() is called."
    }
  ],
  "lastModified": "2026-07-30T14:51:11.223",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}