« Volver al listado

CVE-2026-63075

Estado: AnalizadaAlta (7.5)—

Issue summary: When OpenSSL processes QUIC traffic from a peer that repeatedly sends ack-eliciting packets while not acknowledging ACK-only responses, the QUIC stack can retain ACK-only packet metadata for the lifetime of the connection.

Impact summary: A remote peer that can complete a QUIC handshake can cause connection-scoped memory growth which may lead to Denial of Service through memory exhaustion, especially with sustained traffic or many concurrent QUIC connections.

CWE: CWE-770: Allocation of Resources Without Limits or Throttling

Description: When the OpenSSL QUIC stack sends an ACK-only packet, there is no requirement by the QUIC protocol that the peer will acknowledge that ACK-only packet (i.e. it is itself not ack-eliciting).

Leer descripción completaMostrar menos

However, the OpenSSL implementation stores the metadata about the ACK frames regardless. In and of itself that's ok, but if a malicious peer establishes a connection, and then drives the connection such that ACK-only packets are forced from the OpenSSL implementation peer (i.e., by sending numerous PING frames), and then withholding any subsequent acks for ack-eliciting data, like legitimate data, said malicious peer can force inappropriate memory growth on the OpenSSL peer, potentially leading to a Denial of Service.

The fix is to ensure that we account for the transmission of the ACK-only packet in the packet histories high and low watermark without actually storing the ACK-only packet metadata itself.

FIPS impact: no The OpenSSL FIPS module is not affected as the QUIC code is outside the FIPS module boundary.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vector CVSS AV:N/AC:L/PR:N indica explotación remota sin privilegios (T1190). CWE-770 describe exhaustión de memoria mediante ACKs maliciosos repetidos, típico de DoS por consumo de recursos (T1499.004).

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Filter Network TrafficVulnerability ScanningPrivileged Account ManagementNetwork SegmentationLimit Access to Resource Over NetworkApplication Isolation and Sandboxing

Tecnologías afectadas (1)

Openssl — Openssl

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-63075",
  "cveTags": [],
  "metrics": {
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-63075",
          "role": "CISA Coordinator",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "yes"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "version": "2.0.3",
          "timestamp": "2026-08-25T14:36:48.832724Z"
        }
      }
    ],
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.5,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "openssl-security@openssl.org",
      "affectedData": [
        {
          "vendor": "OpenSSL",
          "product": "OpenSSL",
          "versions": [
            {
              "status": "affected",
              "version": "4.0.0",
              "lessThan": "4.0.2",
              "versionType": "semver"
            },
            {
              "status": "affected",
              "version": "3.6.0",
              "lessThan": "3.6.4",
              "versionType": "semver"
            },
            {
              "status": "affected",
              "version": "3.5.0",
              "lessThan": "3.5.8",
              "versionType": "semver"
            },
            {
              "status": "affected",
              "version": "3.4.0",
              "lessThan": "3.4.7",
              "versionType": "semver"
            }
          ],
          "defaultStatus": "unaffected"
        }
      ]
    }
  ],
  "published": "2026-08-25T13:19:26.413",
  "references": [
    {
      "url": "https://github.com/openssl/openssl/commit/7308946576b12e64b8be53bcf0a120354b2b42bc",
      "tags": [
        "Patch"
      ],
      "source": "openssl-security@openssl.org"
    },
    {
      "url": "https://github.com/openssl/openssl/commit/7c98d79738549df92868e7dd9be4bbf061eed709",
      "tags": [
        "Patch"
      ],
      "source": "openssl-security@openssl.org"
    },
    {
      "url": "https://github.com/openssl/openssl/commit/bf84721c2548351176e367e6de505792f0118dc6",
      "tags": [
        "Patch"
      ],
      "source": "openssl-security@openssl.org"
    },
    {
      "url": "https://github.com/openssl/openssl/commit/c902e5f16d6a9e130e96d3ca6d8f64d71652e393",
      "tags": [
        "Patch"
      ],
      "source": "openssl-security@openssl.org"
    },
    {
      "url": "https://openssl-library.org/news/secadv/20260825.txt",
      "tags": [
        "Vendor Advisory"
      ],
      "source": "openssl-security@openssl.org"
    }
  ],
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "type": "Secondary",
      "source": "openssl-security@openssl.org",
      "description": [
        {
          "lang": "en",
          "value": "CWE-770"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "Issue summary: When OpenSSL processes QUIC traffic from a peer that repeatedly\nsends ack-eliciting packets while not acknowledging ACK-only responses, the\nQUIC stack can retain ACK-only packet metadata for the lifetime of the\nconnection.\n\nImpact summary: A remote peer that can complete a QUIC handshake can\ncause connection-scoped memory growth which may lead to Denial of Service\nthrough memory exhaustion, especially with sustained traffic or many concurrent\nQUIC connections.\n\nCWE: CWE-770: Allocation of Resources Without Limits or Throttling\n\nDescription: When the OpenSSL QUIC stack sends an ACK-only packet,\nthere is no requirement by the QUIC protocol that the peer will acknowledge\nthat ACK-only packet (i.e. it is itself not ack-eliciting). However, the OpenSSL\nimplementation stores the metadata about the ACK frames regardless.\nIn and of itself that's ok, but if a malicious peer establishes a connection, and\nthen drives the connection such that ACK-only packets are forced from the \nOpenSSL implementation peer (i.e., by sending numerous PING frames),\nand then withholding any subsequent acks for ack-eliciting data, like\nlegitimate data, said malicious peer can force inappropriate memory growth\non the OpenSSL peer, potentially leading to a Denial of Service.\n\nThe fix is to ensure that we account for the transmission of the ACK-only\npacket in the packet histories high and low watermark without actually storing\nthe ACK-only packet metadata itself.\n\nFIPS impact: no\nThe OpenSSL FIPS module is not affected as the QUIC code is\noutside the FIPS module boundary."
    }
  ],
  "lastModified": "2026-09-11T21:17:05.403",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "216D6529-561A-4684-A886-50954FBEBFB2",
              "versionEndExcluding": "3.4.7",
              "versionStartIncluding": "3.4.0"
            },
            {
              "criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "C5BB9E95-09B6-4163-B51C-D62B528A04DA",
              "versionEndExcluding": "3.5.8",
              "versionStartIncluding": "3.5.0"
            },
            {
              "criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "B1416826-F2F1-4EA8-9FB2-A56B0DA923C1",
              "versionEndExcluding": "3.6.4",
              "versionStartIncluding": "3.6.0"
            },
            {
              "criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "63B8F45B-E44F-481C-815D-AF9CA89C48F6",
              "versionEndExcluding": "4.0.2",
              "versionStartIncluding": "4.0.0"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "openssl-security@openssl.org"
}