« Volver al listado

CVE-2026-47269

Estado: AplazadaAlta (7.4)—

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.0, pam_usb's deny_remote feature checks utmpx ut_addr_v6 to detect whether an authentication request originates from a remote session. The outer guard was if (utent->ut_addr_v6[0] != 0), which only tests the first 32-bit word of the 128-bit address field. IPv4-mapped IPv6 addresses (::ffff:x.x.x.x) store the IPv4 address in ut_addr_v6[3] with ut_addr_v6[0] == 0.

Leer descripción completaMostrar menos

On systems where the SSH daemon listens on :: (IPv6 wildcard) with AddressFamily any -- common on Ubuntu and Debian -- incoming IPv4 connections are recorded in utmpx as IPv4-mapped IPv6 addresses. The outer check evaluates to false, the remote-detection block is skipped entirely, and the session is treated as local. deny_remote=true does not block the authentication. An attacker with physical access to a registered USB device can authenticate over SSH on an affected system as if they were sitting at a local terminal, bypassing the deny_remote restriction. This vulnerability is fixed in 0.9.0.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Inferido por reglas deterministas a partir del vector CVSS y la CWE. Solo orientativo.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Vulnerability ScanningPrivileged Account ManagementNetwork SegmentationLimit Access to Resource Over NetworkFilter Network TrafficApplication Isolation and Sandboxing

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

PAM USB — PAM USBAI

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-47269",
  "cveTags": [],
  "metrics": {
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-47269",
          "role": "CISA Coordinator",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "version": "2.0.3",
          "timestamp": "2026-05-28T12:50:16.970323Z"
        }
      }
    ],
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "security-advisories@github.com",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.4,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "HIGH",
          "availabilityImpact": "NONE",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.2,
        "exploitabilityScore": 2.2
      }
    ]
  },
  "affected": [
    {
      "source": "security-advisories@github.com",
      "affectedData": [
        {
          "vendor": "mcdope",
          "product": "pam_usb",
          "versions": [
            {
              "status": "affected",
              "version": "< 0.9.0"
            }
          ]
        }
      ]
    }
  ],
  "published": "2026-05-27T21:16:18.810",
  "references": [
    {
      "url": "https://github.com/mcdope/pam_usb/commit/804fe24eae3d742d8be05fd015e36abc3c7d94e5",
      "source": "security-advisories@github.com"
    },
    {
      "url": "https://github.com/mcdope/pam_usb/security/advisories/GHSA-jmmj-qhrq-w45g",
      "source": "security-advisories@github.com"
    }
  ],
  "vulnStatus": "Deferred",
  "weaknesses": [
    {
      "type": "Secondary",
      "source": "security-advisories@github.com",
      "description": [
        {
          "lang": "en",
          "value": "CWE-284"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.0,  pam_usb's deny_remote feature checks utmpx ut_addr_v6 to detect whether an authentication request originates from a remote session. The outer guard was if (utent->ut_addr_v6[0] != 0), which only tests the first 32-bit word of the 128-bit address field. IPv4-mapped IPv6 addresses (::ffff:x.x.x.x) store the IPv4 address in ut_addr_v6[3] with ut_addr_v6[0] == 0. On systems where the SSH daemon listens on :: (IPv6 wildcard) with AddressFamily any -- common on Ubuntu and Debian -- incoming IPv4 connections are recorded in utmpx as IPv4-mapped IPv6 addresses. The outer check evaluates to false, the remote-detection block is skipped entirely, and the session is treated as local. deny_remote=true does not block the authentication. An attacker with physical access to a registered USB device can authenticate over SSH on an affected system as if they were sitting at a local terminal, bypassing the deny_remote restriction. This vulnerability is fixed in 0.9.0."
    }
  ],
  "lastModified": "2026-06-17T10:54:26.940",
  "sourceIdentifier": "security-advisories@github.com"
}