« Volver al listado

CVE-2026-46110

Estado: En análisisAlta (7.5)—

In the Linux kernel, the following vulnerability has been resolved:

net: stmmac: Prevent NULL deref when RX memory exhausted

The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions."

Leer descripción completaMostrar menos

In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called.

This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL)

But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`.

Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there.

In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad de NULL pointer dereference (CWE-476) en controlador stmmac del kernel Linux con vector de red sin autenticación. La pista sugiere DoS (T1499); el impacto principal es negación de servicio por pánico del kernel cuando se agota memoria RX. T1068 como impacto secundario porque un pánico

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-46110",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.5,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "7414a28de1b3b028714859078c00a874f9feff52",
              "lessThan": "fdeb95b1fc7de25c9362990efb9996a8d761055c",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "779334e59850f863bf34665e0ff0b6faf126873b",
              "lessThan": "e1c50b273298c7cd9b08b113e7a7598b531a02f5",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b6cb4541853c7ee512111b0e7ddf3cb66c99c137",
              "lessThan": "5c910f7708e3c507b037ca91ca5b09f8cfe71e65",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b6cb4541853c7ee512111b0e7ddf3cb66c99c137",
              "lessThan": "4af2e62cbcda575a174acd230c3f3a208135e16d",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b6cb4541853c7ee512111b0e7ddf3cb66c99c137",
              "lessThan": "950cb436165aad0f8f2cd49da3cd07677465bcde",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b6cb4541853c7ee512111b0e7ddf3cb66c99c137",
              "lessThan": "0bb05e6adfa99a2ea1fee1125cc0953409f83ed8",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "b435b4573240b5530830a1a60e005c6fcfd928a0",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "6.1.64",
              "lessThan": "6.1.176",
              "versionType": "semver"
            },
            {
              "status": "affected",
              "version": "6.6.3",
              "lessThan": "6.6.140",
              "versionType": "semver"
            },
            {
              "status": "affected",
              "version": "6.5.13",
              "lessThan": "6.6",
              "versionType": "semver"
            }
          ],
          "programFiles": [
            "drivers/net/ethernet/stmicro/stmmac/stmmac_main.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.7"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.7",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.1.176",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.140",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.88",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.30",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.0.7",
              "versionType": "semver",
              "lessThanOrEqual": "7.0.*"
            },
            {
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/net/ethernet/stmicro/stmmac/stmmac_main.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-05-28T10:16:26.420",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/0bb05e6adfa99a2ea1fee1125cc0953409f83ed8",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/4af2e62cbcda575a174acd230c3f3a208135e16d",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/5c910f7708e3c507b037ca91ca5b09f8cfe71e65",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/950cb436165aad0f8f2cd49da3cd07677465bcde",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/e1c50b273298c7cd9b08b113e7a7598b531a02f5",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/fdeb95b1fc7de25c9362990efb9996a8d761055c",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Undergoing Analysis",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-476"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: stmmac: Prevent NULL deref when RX memory exhausted\n\nThe CPU receives frames from the MAC through conventional DMA: the CPU\nallocates buffers for the MAC, then the MAC fills them and returns\nownership to the CPU. For each hardware RX queue, the CPU and MAC\ncoordinate through a shared ring array of DMA descriptors: one\ndescriptor per DMA buffer. Each descriptor includes the buffer's\nphysical address and a status flag (\"OWN\") indicating which side owns\nthe buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set\nthe flag and the MAC is only allowed to clear it, and both must move\nthrough the ring in sequence: thus the ring is used for both\n\"submissions\" and \"completions.\"\n\nIn the stmmac driver, stmmac_rx() bookmarks its position in the ring\nwith the `cur_rx` index. The main receive loop in that function checks\nfor rx_descs[cur_rx].own=0, gives the corresponding buffer to the\nnetwork stack (NULLing the pointer), and increments `cur_rx` modulo the\nring size. After the loop exits, stmmac_rx_refill(), which bookmarks its\nposition with `dirty_rx`, allocates fresh buffers and rearms the\ndescriptors (setting OWN=1). If it fails any allocation, it simply stops\nearly (leaving OWN=0) and will retry where it left off when next called.\n\nThis means descriptors have a three-stage lifecycle (terms my own):\n- `empty` (OWN=1, buffer valid)\n- `full` (OWN=0, buffer valid and populated)\n- `dirty` (OWN=0, buffer NULL)\n\nBut because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In\nthe past (see 'Fixes:'), there was a bug where the loop could cycle\n`cur_rx` all the way back to the first descriptor it dirtied, resulting\nin a NULL dereference when mistaken for `full`. The aforementioned\ncommit resolved that *specific* failure by capping the loop's iteration\nlimit at `dma_rx_size - 1`, but this is only a partial fix: if the\nprevious stmmac_rx_refill() didn't complete, then there are leftover\n`dirty` descriptors that the loop might encounter without needing to\ncycle fully around. The current code therefore panics (see 'Closes:')\nwhen stmmac_rx_refill() is memory-starved long enough for `cur_rx` to\ncatch up to `dirty_rx`.\n\nFix this by explicitly checking, before advancing `cur_rx`, if the next\nentry is dirty; exit the loop if so. This prevents processing of the\nfinal, used descriptor until stmmac_rx_refill() succeeds, but\nfully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix\nintended: so remove the clamp as well. Since stmmac_rx_zc() is a\ncopy-paste-and-tweak of stmmac_rx() and the code structure is identical,\nany fix to stmmac_rx() will also need a corresponding fix for\nstmmac_rx_zc(). Therefore, apply the same check there.\n\nIn stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the\nMAC sets OWN=0 on the final descriptor, it will be unable to send any\nfurther DMA-complete IRQs until it's given more `empty` descriptors.\nCurrently, the driver simply *hopes* that the next stmmac_rx_refill()\nsucceeds, risking an indefinite stall of the receive process if not. But\nthis is not a regression, so it can be addressed in a future change."
    }
  ],
  "lastModified": "2026-06-24T18:28:54.623",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "7D2385BE-AA5B-4108-986E-94FE78869E0B",
              "versionEndExcluding": "6.1.176",
              "versionStartIncluding": "6.1.64"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "3B6AC16B-2F1C-4FDF-8F49-09FC11C3F5B0",
              "versionEndExcluding": "6.6",
              "versionStartIncluding": "6.5.13"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "5BEAFABA-7E5B-445F-93D8-C490B82429EC",
              "versionEndExcluding": "6.6.140",
              "versionStartIncluding": "6.6.3"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "269B1B34-9934-4742-8224-E11B647B979B",
              "versionEndExcluding": "6.12.88",
              "versionStartIncluding": "6.7.1"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "BF39AE08-AE6D-4410-8FBE-76F6BF5BF55B",
              "versionEndExcluding": "6.18.30",
              "versionStartIncluding": "6.13"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "D0893CA7-9AE6-4DFE-AC75-48967D73AD8E",
              "versionEndExcluding": "7.0.7",
              "versionStartIncluding": "6.19"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:-:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "62B55B1B-7D3E-499B-9C42-E9F1EF05A54A"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:rc2:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "E31AD4FC-436C-44AB-BCAB-3A0B37F69EE0"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:rc3:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "C56C6E04-4F04-44A3-8DB8-93899903CFCF"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:rc4:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "5C78EDA4-8BE6-42FC-9512-49032D525A55"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:rc5:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "32F2E5CA-13C6-4601-B530-D465CBF73D1C"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:rc6:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "5ED5AF93-F831-48BC-9545-CCB344E814FC"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:rc7:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "81A7ABCB-0807-4AA2-8F4E-75E38D2E3FD4"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.7:rc8:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "B01471D6-2DB4-4AF2-8BE0-B5082B4B9253"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc1:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "B1EF7059-E670-45F4-B422-54C40FA86390"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}