CVE-2026-45866
Estado: AnalizadaAlta (7.8)—
In the Linux kernel, the following vulnerability has been resolved:
serial: caif: fix use-after-free in caif_serial ldisc_close()
There is a use-after-free bug in caif_serial where handle_tx() may access ser->tty after the tty has been freed.
The race condition occurs between ldisc_close() and packet transmission:
The root cause is that tty_kref_put() is called in ldisc_close() while the network device is still active and can receive packets.
Since ser and tty have a 1:1 binding relationship with consistent lifecycles (ser is allocated in ldisc_open and freed in ser_release via unregister_netdevice, and each ser binds exactly one tty), we can safely defer the tty reference release to ser_release() where the network device is unregistered.
Leer descripción completaMostrar menos
Fix this by moving tty_kref_put() from ldisc_close() to ser_release(), after unregister_netdevice(). This ensures the tty reference is held as long as the network device exists, preventing the UAF.
Note: We save ser->tty before unregister_netdevice() because ser is embedded in netdev's private data and will be freed along with netdev (needs_free_netdev = true).
How to reproduce: Add mdelay(500) at the beginning of ldisc_close() to widen the race window, then run the reproducer program [1].
Note: There is a separate deadloop issue in handle_tx() when using PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper serial backend). This deadloop exists even without this patch, and is likely caused by inconsistency between uart_write_room() and uart_write() in serial core. It has been addressed in a separate patch [2].
Last potentially related work creation:
The buggy address belongs to the physical page: page_owner tracks the page as allocated page last free pid 9778 tgid 9778 stack trace:
Detalles técnicos trazas, registros y código del informe original
CPU 0 (close) CPU 1 (xmit)
------------- ------------
ldisc_close()
tty_kref_put(ser->tty)
[tty may be freed here]
<-- race window -->
caif_xmit()
handle_tx()
tty = ser->tty // dangling ptr
tty->ops->write() // UAF!
schedule_work()
ser_release()
unregister_netdevice()
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620
Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xd0/0x630
kasan_report+0xe4/0x120
handle_tx+0x5d1/0x620
dev_hard_start_xmit+0x9d/0x6c0
__dev_queue_xmit+0x6e2/0x4410
packet_xmit+0x243/0x360
packet_sendmsg+0x26cf/0x5500
__sys_sendto+0x4a3/0x520
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0xc9/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f615df2c0d7
Allocated by task 9930:
Freed by task 64:
The buggy address belongs to the object at ffff8881131e1000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1168 bytes inside of
freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)
Memory state around the buggy address:
ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb
[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#uCVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
- Puntuación base: 7.8
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.17%
- Percentil entre todas las CVEs puntuadas: 6
- Fecha de la puntuación: 5/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
🎯 Técnicas ATT&CK
Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.
- Explotación
T1068Exploitation for Privilege Escalationprivilege escalation85 % - Impacto principal
T1059Command and Scripting Interpreterexecution75 %
Vulnerabilidad CWE-416 (use-after-free) en kernel Linux, acceso local (AV:L) sin interacción (UI:N) con privilegios de usuario (PR:L), permite ejecución de código arbitrario vía explotación de condición de carrera en controlador serial caif_serial.
Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.
🛡️ Mitigaciones ATT&CK que cubren estas técnicas
Tecnologías afectadas (1)
CWE
- CWE-416
Referencias
- https://git.kernel.org/stable/c/308e7e4d0a846359685f40aade023aee7b27284c
- https://git.kernel.org/stable/c/331e2b7051635780edea248dd08ae2026c126f4a
- https://git.kernel.org/stable/c/40962f2bf8cdba63af23aec95ad3f49b689e58e2
- https://git.kernel.org/stable/c/4e63d6f68544ae5269ac9735ae5b69b59b5b8725
- https://git.kernel.org/stable/c/52731ef4438155cea782fac74e547a327ab9e7c5
- https://git.kernel.org/stable/c/5e266ba8d330d3b8e5bc198f238cd8901826cfa1
- https://git.kernel.org/stable/c/c8c197aaa56b25a2d54f3aa07e27e228d6c08546
- https://git.kernel.org/stable/c/d3c75db4e0460641dbcd274b40867e252d801da1
JSON original (NVD)
Mostrar
{
"id": "CVE-2026-45866",
"cveTags": [],
"metrics": {
"cvssMetricV31": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 7.8,
"attackVector": "LOCAL",
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"integrityImpact": "HIGH",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "LOW",
"confidentialityImpact": "HIGH"
},
"impactScore": 5.9,
"exploitabilityScore": 1.8
}
]
},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "5e266ba8d330d3b8e5bc198f238cd8901826cfa1",
"versionType": "git"
},
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "d3c75db4e0460641dbcd274b40867e252d801da1",
"versionType": "git"
},
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "4e63d6f68544ae5269ac9735ae5b69b59b5b8725",
"versionType": "git"
},
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "331e2b7051635780edea248dd08ae2026c126f4a",
"versionType": "git"
},
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "52731ef4438155cea782fac74e547a327ab9e7c5",
"versionType": "git"
},
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "c8c197aaa56b25a2d54f3aa07e27e228d6c08546",
"versionType": "git"
},
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "40962f2bf8cdba63af23aec95ad3f49b689e58e2",
"versionType": "git"
},
{
"status": "affected",
"version": "56e0ef527b184b3de2d7f88c6190812b2b2ac6bf",
"lessThan": "308e7e4d0a846359685f40aade023aee7b27284c",
"versionType": "git"
}
],
"programFiles": [
"drivers/net/caif/caif_serial.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "3.11"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "3.11",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "5.10.252",
"versionType": "semver",
"lessThanOrEqual": "5.10.*"
},
{
"status": "unaffected",
"version": "5.15.202",
"versionType": "semver",
"lessThanOrEqual": "5.15.*"
},
{
"status": "unaffected",
"version": "6.1.165",
"versionType": "semver",
"lessThanOrEqual": "6.1.*"
},
{
"status": "unaffected",
"version": "6.6.128",
"versionType": "semver",
"lessThanOrEqual": "6.6.*"
},
{
"status": "unaffected",
"version": "6.12.75",
"versionType": "semver",
"lessThanOrEqual": "6.12.*"
},
{
"status": "unaffected",
"version": "6.18.14",
"versionType": "semver",
"lessThanOrEqual": "6.18.*"
},
{
"status": "unaffected",
"version": "6.19.4",
"versionType": "semver",
"lessThanOrEqual": "6.19.*"
},
{
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"drivers/net/caif/caif_serial.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2026-05-27T14:16:58.963",
"references": [
{
"url": "https://git.kernel.org/stable/c/308e7e4d0a846359685f40aade023aee7b27284c",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/331e2b7051635780edea248dd08ae2026c126f4a",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/40962f2bf8cdba63af23aec95ad3f49b689e58e2",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/4e63d6f68544ae5269ac9735ae5b69b59b5b8725",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/52731ef4438155cea782fac74e547a327ab9e7c5",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/5e266ba8d330d3b8e5bc198f238cd8901826cfa1",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/c8c197aaa56b25a2d54f3aa07e27e228d6c08546",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/d3c75db4e0460641dbcd274b40867e252d801da1",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Analyzed",
"weaknesses": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"description": [
{
"lang": "en",
"value": "CWE-416"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: caif: fix use-after-free in caif_serial ldisc_close()\n\nThere is a use-after-free bug in caif_serial where handle_tx() may\naccess ser->tty after the tty has been freed.\n\nThe race condition occurs between ldisc_close() and packet transmission:\n\n CPU 0 (close) CPU 1 (xmit)\n ------------- ------------\n ldisc_close()\n tty_kref_put(ser->tty)\n [tty may be freed here]\n <-- race window -->\n caif_xmit()\n handle_tx()\n tty = ser->tty // dangling ptr\n tty->ops->write() // UAF!\n schedule_work()\n ser_release()\n unregister_netdevice()\n\nThe root cause is that tty_kref_put() is called in ldisc_close() while\nthe network device is still active and can receive packets.\n\nSince ser and tty have a 1:1 binding relationship with consistent\nlifecycles (ser is allocated in ldisc_open and freed in ser_release\nvia unregister_netdevice, and each ser binds exactly one tty), we can\nsafely defer the tty reference release to ser_release() where the\nnetwork device is unregistered.\n\nFix this by moving tty_kref_put() from ldisc_close() to ser_release(),\nafter unregister_netdevice(). This ensures the tty reference is held\nas long as the network device exists, preventing the UAF.\n\nNote: We save ser->tty before unregister_netdevice() because ser is\nembedded in netdev's private data and will be freed along with netdev\n(needs_free_netdev = true).\n\nHow to reproduce: Add mdelay(500) at the beginning of ldisc_close()\nto widen the race window, then run the reproducer program [1].\n\nNote: There is a separate deadloop issue in handle_tx() when using\nPORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper\nserial backend). This deadloop exists even without this patch,\nand is likely caused by inconsistency between uart_write_room() and\nuart_write() in serial core. It has been addressed in a separate\npatch [2].\n\nKASAN report:\n\n==================================================================\nBUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620\nRead of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929\n\nCall Trace:\n <TASK>\n dump_stack_lvl+0x10e/0x1f0\n print_report+0xd0/0x630\n kasan_report+0xe4/0x120\n handle_tx+0x5d1/0x620\n dev_hard_start_xmit+0x9d/0x6c0\n __dev_queue_xmit+0x6e2/0x4410\n packet_xmit+0x243/0x360\n packet_sendmsg+0x26cf/0x5500\n __sys_sendto+0x4a3/0x520\n __x64_sys_sendto+0xe0/0x1c0\n do_syscall_64+0xc9/0xf80\n entry_SYSCALL_64_after_hwframe+0x77/0x7f\nRIP: 0033:0x7f615df2c0d7\n\nAllocated by task 9930:\n\nFreed by task 64:\n\nLast potentially related work creation:\n\nThe buggy address belongs to the object at ffff8881131e1000\n which belongs to the cache kmalloc-cg-2k of size 2048\nThe buggy address is located 1168 bytes inside of\n freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)\n\nThe buggy address belongs to the physical page:\npage_owner tracks the page as allocated\npage last free pid 9778 tgid 9778 stack trace:\n\nMemory state around the buggy address:\n ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ^\n ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n==================================================================\n[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb\n[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u"
}
],
"lastModified": "2026-06-25T21:06:52.637",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "8DE35674-7D79-4830-BF54-FA8783712527",
"versionEndExcluding": "5.10.252",
"versionStartIncluding": "3.11"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "4002FC2B-1456-4666-B240-0EBF590C4671",
"versionEndExcluding": "5.15.202",
"versionStartIncluding": "5.11"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "797C7F46-D0BE-4FB8-A502-C5EF8E6B6654",
"versionEndExcluding": "6.1.165",
"versionStartIncluding": "5.16"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "851E9353-6C09-4CC9-877E-E09DB164A3C2",
"versionEndExcluding": "6.6.128",
"versionStartIncluding": "6.2"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "BCE16369-98ED-41CF-8995-DFDC10B288D2",
"versionEndExcluding": "6.12.75",
"versionStartIncluding": "6.7"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "BF463CB7-1F58-4607-B847-77ED23E4B9B7",
"versionEndExcluding": "6.18.14",
"versionStartIncluding": "6.13"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "672A3E79-EC03-479D-8503-361DFBDC8092",
"versionEndExcluding": "6.19.4",
"versionStartIncluding": "6.19"
}
],
"operator": "OR"
}
]
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}