« Back to list

CVE-2026-31764

Status: AnalyzedHigh (7.8)—

In the Linux kernel, the following vulnerability has been resolved:

iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only

The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access.

The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency.

Read full descriptionShow less

Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer.

CVSS

Exploitation probability (EPSS)

EPSS (Exploit Prediction Scoring System, FIRST) estimates how likely a vulnerability is to be exploited in the wild within 30 days. It complements CVSS (impact) and CISA KEV (confirmed exploitation).

🎯 ATT&CK techniques

How this vulnerability is exploited and what the attacker gains, in MITRE ATT&CK terms.

Vulnerabilidad local (AV:L, PR:L) que causa acceso fuera de límites en tabla kernel, permitiendo DoS o corrupción de memoria en sensor imu st_lsm6dsx.

Inferred by our analysis agent from the official description, CVSS vector and CWE, and checked by a supervisor. May contain errors.

🛡️ ATT&CK mitigations that cover these techniques

Affected technologies (1)

CWEs

References

Raw JSON (NVD)

Show
{
  "id": "CVE-2026-31764",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
              "lessThan": "3225a81e8d264442b14c7c1bc965ebafa3c0ee01",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
              "lessThan": "679c04c10d65d32a3f269e696b22912ff0a001b9",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.19"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.19",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.19.12",
              "versionType": "semver",
              "lessThanOrEqual": "6.19.*"
            },
            {
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-05-01T15:16:39.523",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/3225a81e8d264442b14c7c1bc965ebafa3c0ee01",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/679c04c10d65d32a3f269e696b22912ff0a001b9",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-129"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\niio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only\n\nThe st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace\nwrites the buffer sampling frequency sysfs attribute, calls\nst_lsm6dsx_check_odr(), which accesses the odr_table array at index\n`sensor->id`; since this array is only 2 entries long, an access for any\nsensor type other than accelerometer or gyroscope is an out-of-bounds\naccess.\n\nThe motivation for being able to set a buffer frequency different from the\nsensor sampling frequency is to support use cases that need accurate event\ndetection (which requires a high sampling frequency) while retrieving\nsensor data at low frequency. Since all the supported event types are\ngenerated from acceleration data only, do not create the buffer sampling\nfrequency attribute for sensor types other than the accelerometer."
    }
  ],
  "lastModified": "2026-06-17T10:34:25.233",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "0A2B9540-02D5-41B4-B16A-82AF66FD4F36",
              "versionEndExcluding": "6.19.12",
              "versionStartIncluding": "6.19"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "1D2315C0-D46F-4F85-9754-F9E5E11374A6"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}