« Volver al listado

CVE-2026-31452

Estado: ModificadaAlta (7.8)—

In the Linux kernel, the following vulnerability has been resolved:

ext4: convert inline data to extents when truncate exceeds inline size

Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline.

Without this fix, the following sequence causes a kernel BUG_ON():

1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)

Leer descripción completaMostrar menos

The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request.

The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change.

This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

AV:L/PR:L/UI:N apunta a escalada local; BUG_ON() provoca DoS de kernel; potencial ejecución si se corrompen datos durante truncate.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Execution PreventionThreat Intelligence ProgramRestrict Web-Based ContentPrivileged Account ManagementLimit Software InstallationFilter Network Traffic

Tecnologías afectadas (1)

Linux — Linux Kernel

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-31452",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "110d7ef602659ce4d7947c5480f7ca2779696aaf",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "f53a5d9f32924bc2a810d2df243b7714da58b636",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "c047332be7195833a5c5126816c2502df8269fe4",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "699bac4d4c951974d55b045c983d1de777215949",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "7920dcc571cef3d8aa9ee109c136125d61d41669",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "93cb2d103e5c707de0f7ad58a39b7f0fddc27aa6",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "07c1a31af18290054da3d18221b8bf58983c5d3a",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "67cf5b09a46f72e048501b84996f2f77bc42e947",
              "lessThan": "ed9356a30e59c7cc3198e7fc46cfedf3767b9b17",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "fs/ext4/inode.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "3.8"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "3.8",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "5.10.253",
              "versionType": "semver",
              "lessThanOrEqual": "5.10.*"
            },
            {
              "status": "unaffected",
              "version": "5.15.203",
              "versionType": "semver",
              "lessThanOrEqual": "5.15.*"
            },
            {
              "status": "unaffected",
              "version": "6.1.168",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.131",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.80",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.21",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "6.19.11",
              "versionType": "semver",
              "lessThanOrEqual": "6.19.*"
            },
            {
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "fs/ext4/inode.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    },
    {
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
      "affectedData": [
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        }
      ]
    }
  ],
  "published": "2026-04-22T14:16:39.460",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/07c1a31af18290054da3d18221b8bf58983c5d3a",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/110d7ef602659ce4d7947c5480f7ca2779696aaf",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/699bac4d4c951974d55b045c983d1de777215949",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/7920dcc571cef3d8aa9ee109c136125d61d41669",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/93cb2d103e5c707de0f7ad58a39b7f0fddc27aa6",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c047332be7195833a5c5126816c2502df8269fe4",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/ed9356a30e59c7cc3198e7fc46cfedf3767b9b17",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/f53a5d9f32924bc2a810d2df243b7714da58b636",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html",
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
    },
    {
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html",
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
    }
  ],
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-787"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\next4: convert inline data to extents when truncate exceeds inline size\n\nAdd a check in ext4_setattr() to convert files from inline data storage\nto extent-based storage when truncate() grows the file size beyond the\ninline capacity. This prevents the filesystem from entering an\ninconsistent state where the inline data flag is set but the file size\nexceeds what can be stored inline.\n\nWithout this fix, the following sequence causes a kernel BUG_ON():\n\n1. Mount filesystem with inode that has inline flag set and small size\n2. truncate(file, 50MB) - grows size but inline flag remains set\n3. sendfile() attempts to write data\n4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)\n\nThe crash occurs because ext4_write_inline_data() expects inline storage\nto accommodate the write, but the actual inline capacity (~60 bytes for\ni_block + ~96 bytes for xattrs) is far smaller than the file size and\nwrite request.\n\nThe fix checks if the new size from setattr exceeds the inode's actual\ninline capacity (EXT4_I(inode)->i_inline_size) and converts the file to\nextent-based storage before proceeding with the size change.\n\nThis addresses the root cause by ensuring the inline data flag and file\nsize remain consistent during truncate operations."
    }
  ],
  "lastModified": "2026-07-14T13:18:42.430",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "75026C47-58A0-4758-8F32-8C374525DEA1",
              "versionEndExcluding": "5.10.253",
              "versionStartIncluding": "3.8"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "20DDB3E9-AABF-4107-ADB0-5362AA067045",
              "versionEndExcluding": "5.15.203",
              "versionStartIncluding": "5.11"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "E2DDDCA1-6DAB-4018-B920-8F045DDD8D3B",
              "versionEndExcluding": "6.1.168",
              "versionStartIncluding": "5.16"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "CE6ED4D4-0046-4573-BFA9-D64143B6A89F",
              "versionEndExcluding": "6.6.131",
              "versionStartIncluding": "6.2"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "97EB19EC-A11E-49C6-9D2F-6F6EC6CB98B6",
              "versionEndExcluding": "6.12.80",
              "versionStartIncluding": "6.7"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "ED39847A-3B46-4729-B7CA-B2C30B9FA8FE",
              "versionEndExcluding": "6.18.21",
              "versionStartIncluding": "6.13"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "4CA2E747-A9EC-4518-9AA2-B4247FC748B7",
              "versionEndExcluding": "6.19.11",
              "versionStartIncluding": "6.19"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}