CVE-2026-31448

Estado: ModificadaCrítica (9.4)—

In the Linux kernel, the following vulnerability has been resolved:

ext4: avoid infinite loops caused by residual data

On the mkdir/mknod path, when mapping logical blocks to physical blocks, if inserting a new extent into the extent tree fails (in this example, because the file system disabled the huge file feature when marking the inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to reclaim the physical block without deleting the corresponding data in the extent tree.

Leer descripción completaMostrar menos

This causes subsequent mkdir operations to reference the previously reclaimed physical block number again, even though this physical block is already being used by the xattr block. Therefore, a situation arises where both the directory and xattr are using the same buffer head block in memory simultaneously.

The above causes ext4_xattr_block_set() to enter an infinite loop about "inserted" and cannot release the inode lock, ultimately leading to the 143s blocking problem mentioned in [1].

If the metadata is corrupted, then trying to remove some extent space can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE was passed, remove space wrongly update quota information. Jan Kara suggests distinguishing between two cases:

1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully consistent and we must maintain its consistency including all the accounting. However these errors can happen only early before we've inserted the extent into the extent tree. So current code works correctly for this case.

2) Some other error - this means metadata is corrupted. We should strive to do as few modifications as possible to limit damage. So I'd just skip freeing of allocated blocks.

[1] INFO: task syz.0.17:5995 blocked for more than 143 seconds. Call Trace: inode_lock_nested include/linux/fs.h:1073 [inline] __start_dirop fs/namei.c:2923 [inline] start_dirop fs/namei.c:2934 [inline]

CVSS

Versión: 3.1
Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H
Puntuación base: 9.4

Probabilidad de explotación (EPSS)

Probabilidad de explotación en los próximos 30 días: 0.65%
Percentil entre todas las CVEs puntuadas: 50
Fecha de la puntuación: 6/10/2026

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

ExplotaciónT1190 Exploit Public-Facing Applicationinitial access75 %
Impacto principalT1499.004 Application or System Exploitationimpact80 %
Impacto secundarioT1565.001 Stored Data Manipulationimpact60 %

AV:N/AC:L/PR:N indica explotación remota sin privilegios (T1190). La vulnerabilidad causa bucles infinitos que bloquean operaciones críticas (T1499.004: CPU exhaustion). Corrupción de metadatos del filesystem sugiere manipulación de datos (T1565.001).

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Filter Network Traffic Vulnerability Scanning Restrict File and Directory Permissions Privileged Account Management Remote Data Storage Network Segmentation

Tecnologías afectadas (1)

Linux — Linux Kernel

CWE

CWE-835

Referencias

JSON original (NVD)

Mostrar

{
  "id": "CVE-2026-31448",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 9.4,
          "attackVector": "NETWORK",
          "baseSeverity": "CRITICAL",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "LOW"
        },
        "impactScore": 5.5,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "315054f023d28ee64f308adf8b5737831541776b",
              "lessThan": "c66545e83a802c3851d9be27a41c0479dd29ff0c",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "315054f023d28ee64f308adf8b5737831541776b",
              "lessThan": "ecc50bfca9b5c2ee6aeef998181689b80477367b",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "315054f023d28ee64f308adf8b5737831541776b",
              "lessThan": "3a7667595bcad84da53fc156a418e110267c3412",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "315054f023d28ee64f308adf8b5737831541776b",
              "lessThan": "416c86f30f91b4fb2642ef6b102596ca898f41a5",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "315054f023d28ee64f308adf8b5737831541776b",
              "lessThan": "64f425b06b3bea9abc8977fd3982779b3ad070c9",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "315054f023d28ee64f308adf8b5737831541776b",
              "lessThan": "5422fe71d26d42af6c454ca9527faaad4e677d6c",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "fs/ext4/extents.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "2.6.22"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "2.6.22",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.1.168",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.131",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.80",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.21",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "6.19.11",
              "versionType": "semver",
              "lessThanOrEqual": "6.19.*"
            },
            {
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "fs/ext4/extents.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    },
    {
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
      "affectedData": [
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.5",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        }
      ]
    }
  ],
  "published": "2026-04-22T14:16:38.760",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/3a7667595bcad84da53fc156a418e110267c3412",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/416c86f30f91b4fb2642ef6b102596ca898f41a5",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/5422fe71d26d42af6c454ca9527faaad4e677d6c",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/64f425b06b3bea9abc8977fd3982779b3ad070c9",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c66545e83a802c3851d9be27a41c0479dd29ff0c",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/ecc50bfca9b5c2ee6aeef998181689b80477367b",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html",
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
    },
    {
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html",
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
    }
  ],
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-835"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\next4: avoid infinite loops caused by residual data\n\nOn the mkdir/mknod path, when mapping logical blocks to physical blocks,\nif inserting a new extent into the extent tree fails (in this example,\nbecause the file system disabled the huge file feature when marking the\ninode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to\nreclaim the physical block without deleting the corresponding data in\nthe extent tree. This causes subsequent mkdir operations to reference\nthe previously reclaimed physical block number again, even though this\nphysical block is already being used by the xattr block. Therefore, a\nsituation arises where both the directory and xattr are using the same\nbuffer head block in memory simultaneously.\n\nThe above causes ext4_xattr_block_set() to enter an infinite loop about\n\"inserted\" and cannot release the inode lock, ultimately leading to the\n143s blocking problem mentioned in [1].\n\nIf the metadata is corrupted, then trying to remove some extent space\ncan do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE\nwas passed, remove space wrongly update quota information.\nJan Kara suggests distinguishing between two cases:\n\n1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully\nconsistent and we must maintain its consistency including all the\naccounting. However these errors can happen only early before we've\ninserted the extent into the extent tree. So current code works correctly\nfor this case.\n\n2) Some other error - this means metadata is corrupted. We should strive to\ndo as few modifications as possible to limit damage. So I'd just skip\nfreeing of allocated blocks.\n\n[1]\nINFO: task syz.0.17:5995 blocked for more than 143 seconds.\nCall Trace:\n inode_lock_nested include/linux/fs.h:1073 [inline]\n __start_dirop fs/namei.c:2923 [inline]\n start_dirop fs/namei.c:2934 [inline]"
    }
  ],
  "lastModified": "2026-07-14T13:18:41.980",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "09A2CD65-1CD4-45BC-AB86-2A903D823B07",
              "versionEndExcluding": "6.1.168",
              "versionStartIncluding": "2.6.22.1"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "CE6ED4D4-0046-4573-BFA9-D64143B6A89F",
              "versionEndExcluding": "6.6.131",
              "versionStartIncluding": "6.2"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "97EB19EC-A11E-49C6-9D2F-6F6EC6CB98B6",
              "versionEndExcluding": "6.12.80",
              "versionStartIncluding": "6.7"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "ED39847A-3B46-4729-B7CA-B2C30B9FA8FE",
              "versionEndExcluding": "6.18.21",
              "versionStartIncluding": "6.13"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "4CA2E747-A9EC-4518-9AA2-B4247FC748B7",
              "versionEndExcluding": "6.19.11",
              "versionStartIncluding": "6.19"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:-:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "7F7D6C66-3384-4ACC-9D08-C5A26B4FD004"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc4:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "6465E61D-0238-4ED3-B4CB-E3B93F4F324F"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc5:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "830B8340-2B8F-4F0A-8943-F4413411573C"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc6:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "D123AAFE-3F17-45C4-9382-BA392FD022C4"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:2.6.22:rc7:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "E0C256E6-2691-4478-A51C-DE580A717AB9"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}