CVE-2026-19595

Status: ReceivedMedium (6.1)—

Severity6.1Medium · CVSS 3.1

Exploitation probability0.11 %higher than 1% of CVEs

Active exploitationNonot in the CISA catalog

Public exploitNot knownno public code found

The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread.

Read full descriptionShow less

An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing.

Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service.

The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated.

CVSS

Base score: 6.1
Version: 3.1
Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:H

Exploitation probability (EPSS)

Probability of exploitation in the next 30 days: 0.11 %
Percentile among all scored CVEs: 1
Score date: 10/20/2026

EPSS (Exploit Prediction Scoring System, FIRST) estimates how likely a vulnerability is to be exploited in the wild within 30 days. It complements CVSS (impact) and CISA KEV (confirmed exploitation).

ATT&CK techniques

How this vulnerability is exploited and what the attacker gains, in MITRE ATT&CK terms.

ExploitationT1068 Exploitation for Privilege Escalationprivilege escalation85 %
Primary impactT1499 Endpoint Denial of Serviceimpact90 %
Secondary impactT1565 Data Manipulationimpact55 %

Vector AV:L/PR:L/UI:N: un hilo sin privilegios con acceso RTIO usa la syscall con un puntero solo legible; provoca fallo en modo kernel (DoS fiable) y escritura en memoria de solo lectura.

Inferred by our analysis agent from the official description, CVSS vector and CWE, and checked by a supervisor. May contain errors.

ATT&CK mitigations that cover these techniques

Threat Intelligence Program Restrict File and Directory Permissions Remote Data Storage Network Segmentation Filter Network Traffic Execution Prevention

Affected technologies (1)

⚠ AI-inferred from the description — NVD hasn't analyzed this CVE yet, these aren't verified CPEs.

Zephyrproject — Zephyr^AI

CWEs

CWE-787, CWE-822

References

Show 2 references

Raw JSON (NVD)

Show

{
  "id": "CVE-2026-19595",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "vulnerabilities@zephyrproject.org",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 6.1,
          "attackVector": "LOCAL",
          "baseSeverity": "MEDIUM",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:H",
          "integrityImpact": "LOW",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 4.2,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "vulnerabilities@zephyrproject.org",
      "affectedData": [
        {
          "vendor": "zephyrproject",
          "product": "zephyr",
          "versions": [
            {
              "status": "affected",
              "version": "3.4.0",
              "versionType": "semver",
              "lessThanOrEqual": "4.4.2"
            }
          ],
          "packageName": "zephyr",
          "programFiles": [
            "subsys/rtio/rtio_handlers.c",
            "subsys/rtio/rtio_syscalls.c"
          ],
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "programRoutines": [
            {
              "name": "z_vrfy_rtio_cqe_get_mempool_buffer"
            }
          ]
        }
      ]
    }
  ],
  "published": "2026-10-19T23:17:36.717",
  "references": [
    {
      "url": "https://github.com/zephyrproject-rtos/zephyr/commit/bea93400138362691403b7f81de1e9048681547d",
      "source": "vulnerabilities@zephyrproject.org"
    },
    {
      "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7337-mc44-5wjm",
      "source": "vulnerabilities@zephyrproject.org"
    }
  ],
  "vulnStatus": "Received",
  "weaknesses": [
    {
      "type": "Secondary",
      "source": "vulnerabilities@zephyrproject.org",
      "description": [
        {
          "lang": "en",
          "value": "CWE-787"
        },
        {
          "lang": "en",
          "value": "CWE-822"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread.\n\nAn unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing.\n\nTwo outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service.\n\nThe read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated."
    }
  ],
  "lastModified": "2026-10-19T23:17:36.717",
  "sourceIdentifier": "vulnerabilities@zephyrproject.org"
}