CVE-2026-10665
In Zephyr's WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf->data, data_len, pkt->buffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function's internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound).
Leer descripción completaMostrar menos
When data_len exceeds CONFIG_WIREGUARD_BUF_LEN — e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it — the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len > CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity.
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H
- Puntuación base: 7.4
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.60%
- Percentil entre todas las CVEs puntuadas: 47
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
🎯 Técnicas ATT&CK
Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.
- Explotación
T1190Exploit Public-Facing Applicationinitial access95 % - Impacto principal
T1499.004Application or System Exploitationimpact90 % - Impacto secundario
T1565.001Stored Data Manipulationimpact75 %
Vector CVSS AV:N/PR:N permite explotación remota sin privilegios (T1190). El desbordamiento de búfer causa corrupción de memoria remota confiable (T1499.004 DoS) y potencial manipulación de datos (T1565.001), requiriendo solo índice de sesión válido, no autenticador.
Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.
🛡️ Mitigaciones ATT&CK que cubren estas técnicas
Tecnologías afectadas (1)
CWE
- CWE-787
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2026-10665",
"cveTags": [],
"metrics": {
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-10665",
"role": "CISA Coordinator",
"options": [
{
"exploitation": "poc"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"version": "2.0.3",
"timestamp": "2026-07-13T15:48:45.958922Z"
}
}
],
"cvssMetricV31": [
{
"type": "Secondary",
"source": "vulnerabilities@zephyrproject.org",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 7.4,
"attackVector": "NETWORK",
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H",
"integrityImpact": "HIGH",
"userInteraction": "NONE",
"attackComplexity": "HIGH",
"availabilityImpact": "HIGH",
"privilegesRequired": "NONE",
"confidentialityImpact": "NONE"
},
"impactScore": 5.2,
"exploitabilityScore": 2.2
}
]
},
"affected": [
{
"source": "vulnerabilities@zephyrproject.org",
"affectedData": [
{
"vendor": "zephyrproject",
"product": "zephyr",
"versions": [
{
"status": "affected",
"version": "4.4.0",
"lessThan": "4.5.0",
"versionType": "semver"
}
],
"packageName": "zephyr",
"programFiles": [
"subsys/net/lib/wireguard/wg_crypto.c"
],
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected"
}
]
}
],
"published": "2026-07-12T17:16:24.433",
"references": [
{
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/6d8bb28dc9064e05e52b5a00b2998ecc663e38cb",
"tags": [
"Patch"
],
"source": "vulnerabilities@zephyrproject.org"
},
{
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367",
"tags": [
"Exploit",
"Patch",
"Vendor Advisory"
],
"source": "vulnerabilities@zephyrproject.org"
},
{
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367",
"tags": [
"Exploit",
"Patch",
"Vendor Advisory"
],
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0"
}
],
"vulnStatus": "Analyzed",
"weaknesses": [
{
"type": "Secondary",
"source": "vulnerabilities@zephyrproject.org",
"description": [
{
"lang": "en",
"value": "CWE-787"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In Zephyr's WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf->data, data_len, pkt->buffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function's internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound). When data_len exceeds CONFIG_WIREGUARD_BUF_LEN — e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it — the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len > CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity."
}
],
"lastModified": "2026-07-16T03:24:44.553",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:zephyrproject:zephyr:4.4.0:rc1:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "751E0B4E-7D5E-4847-ADD2-0A04D95A0577"
},
{
"criteria": "cpe:2.3:o:zephyrproject:zephyr:4.4.0:rc2:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "CF3B04E2-F95F-42DD-BA7E-E96D4965E1D3"
},
{
"criteria": "cpe:2.3:o:zephyrproject:zephyr:4.4.0:rc3:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "15D1A475-CDAB-486F-82C6-E885E844DA22"
}
],
"operator": "OR"
}
]
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org"
}