CVE-2025-40743

Estado: AplazadaAlta (8.7)—

A vulnerability has been identified in SINUMERIK 828D PPU.4 (All versions < V4.95 SP5), SINUMERIK 828D PPU.5 (All versions < V5.25 SP1), SINUMERIK 840D sl (All versions < V4.95 SP5), SINUMERIK MC (All versions < V1.25 SP1), SINUMERIK MC V1.15 (All versions < V1.15 SP5), SINUMERIK ONE (All versions < V6.25 SP1), SINUMERIK ONE V6.15 (All versions < V6.15 SP5). The affected application improperly validates authentication for its VNC access service, allowing access with insufficient password verification. This could allow an attacker to gain unauthorized remote access and potentially compromise system confidentiality, integrity, or availability.

CVSS

Versión: 4.0
Vector: CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X
Puntuación base: 8.7

Probabilidad de explotación (EPSS)

Probabilidad de explotación en los próximos 30 días: 0.24%
Percentil entre todas las CVEs puntuadas: 14
Fecha de la puntuación: 6/10/2026

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

ExplotaciónT1210 Exploitation of Remote Serviceslateral movement85 %
Impacto principalT1078 Valid Accountsstealth · persistence · privilege escalation · initial access90 %
Impacto secundarioT1068 Exploitation for Privilege Escalationprivilege escalation75 %

AV:A (red adyacente) sin autenticación válida por fallo de validación de credenciales en VNC → T1210. Acceso remoto sin verificación de contraseña permite T1078 (credenciales válidas/bypass); escalada potencial a root/admin (T1068) en sistemas SINUMERIK críticos.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Threat Intelligence Program Privileged Account Management Application Isolation and Sandboxing Exploit Protection Update Software Application Developer Guidance

Tecnologías afectadas (5)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Siemens — Sinumerik 828d Ppu.4^AI Siemens — Sinumerik 828d Ppu.5^AI Siemens — Sinumerik 840d SL^AI Siemens — Sinumerik MC^AI Siemens — Sinumerik ONE^AI

CWE

CWE-288

Referencias

https://cert-portal.siemens.com/productcert/html/ssa-177847.html

JSON original (NVD)

Mostrar

{
  "id": "CVE-2025-40743",
  "cveTags": [],
  "metrics": {
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2025-40743",
          "role": "CISA Coordinator",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "version": "2.0.3",
          "timestamp": "2025-08-12T13:31:42.534312Z"
        }
      }
    ],
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "productcert@siemens.com",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 8.3,
          "attackVector": "ADJACENT_NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "LOW",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.5,
        "exploitabilityScore": 2.8
      }
    ],
    "cvssMetricV40": [
      {
        "type": "Secondary",
        "source": "productcert@siemens.com",
        "cvssData": {
          "Safety": "NOT_DEFINED",
          "version": "4.0",
          "Recovery": "NOT_DEFINED",
          "baseScore": 8.7,
          "Automatable": "NOT_DEFINED",
          "attackVector": "ADJACENT",
          "baseSeverity": "HIGH",
          "valueDensity": "NOT_DEFINED",
          "vectorString": "CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X",
          "exploitMaturity": "NOT_DEFINED",
          "providerUrgency": "NOT_DEFINED",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "attackRequirements": "NONE",
          "privilegesRequired": "NONE",
          "subIntegrityImpact": "NONE",
          "vulnIntegrityImpact": "HIGH",
          "integrityRequirement": "NOT_DEFINED",
          "modifiedAttackVector": "NOT_DEFINED",
          "subAvailabilityImpact": "NONE",
          "vulnAvailabilityImpact": "LOW",
          "availabilityRequirement": "NOT_DEFINED",
          "modifiedUserInteraction": "NOT_DEFINED",
          "modifiedAttackComplexity": "NOT_DEFINED",
          "subConfidentialityImpact": "NONE",
          "vulnConfidentialityImpact": "HIGH",
          "confidentialityRequirement": "NOT_DEFINED",
          "modifiedAttackRequirements": "NOT_DEFINED",
          "modifiedPrivilegesRequired": "NOT_DEFINED",
          "modifiedSubIntegrityImpact": "NOT_DEFINED",
          "modifiedVulnIntegrityImpact": "NOT_DEFINED",
          "vulnerabilityResponseEffort": "NOT_DEFINED",
          "modifiedSubAvailabilityImpact": "NOT_DEFINED",
          "modifiedVulnAvailabilityImpact": "NOT_DEFINED",
          "modifiedSubConfidentialityImpact": "NOT_DEFINED",
          "modifiedVulnConfidentialityImpact": "NOT_DEFINED"
        }
      }
    ]
  },
  "affected": [
    {
      "source": "productcert@siemens.com",
      "affectedData": [
        {
          "vendor": "Siemens",
          "product": "SINUMERIK 828D PPU.4",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "V4.95 SP5",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SINUMERIK 828D PPU.5",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "V5.25 SP1",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SINUMERIK 840D sl",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "V4.95 SP5",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SINUMERIK MC",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "V1.25 SP1",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SINUMERIK MC V1.15",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "V1.15 SP5",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SINUMERIK ONE",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "V6.25 SP1",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SINUMERIK ONE V6.15",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "lessThan": "V6.15 SP5",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        }
      ]
    }
  ],
  "published": "2025-08-12T12:15:35.803",
  "references": [
    {
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-177847.html",
      "source": "productcert@siemens.com"
    }
  ],
  "vulnStatus": "Deferred",
  "weaknesses": [
    {
      "type": "Secondary",
      "source": "productcert@siemens.com",
      "description": [
        {
          "lang": "en",
          "value": "CWE-288"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "A vulnerability has been identified in SINUMERIK 828D PPU.4 (All versions < V4.95 SP5), SINUMERIK 828D PPU.5 (All versions < V5.25 SP1), SINUMERIK 840D sl (All versions < V4.95 SP5), SINUMERIK MC (All versions < V1.25 SP1), SINUMERIK MC V1.15 (All versions < V1.15 SP5), SINUMERIK ONE (All versions < V6.25 SP1), SINUMERIK ONE V6.15 (All versions < V6.15 SP5). The affected application improperly validates authentication for its VNC access service, allowing access with insufficient password verification.\r\nThis could allow an attacker to gain unauthorized remote access and potentially compromise system confidentiality, integrity, or availability."
    },
    {
      "lang": "es",
      "value": "Se ha identificado una vulnerabilidad en SINUMERIK 828D PPU.4 (todas las versiones anteriores a V4.95 SP5), SINUMERIK 828D PPU.5 (todas las versiones anteriores a V5.25 SP1), SINUMERIK 840D sl (todas las versiones anteriores a V4.95 SP5), SINUMERIK MC (todas las versiones anteriores a V1.25 SP1), SINUMERIK MC V1.15 (todas las versiones anteriores a V1.15 SP5), SINUMERIK ONE (todas las versiones anteriores a V6.25 SP1) y SINUMERIK ONE V6.15 (todas las versiones anteriores a V6.15 SP5). La aplicación afectada valida incorrectamente la autenticación para su servicio de acceso VNC, lo que permite el acceso sin verificación de contraseña suficiente. Esto podría permitir que un atacante obtenga acceso remoto no autorizado y potencialmente comprometer la confidencialidad, integridad o disponibilidad del sistema."
    }
  ],
  "lastModified": "2026-06-17T09:22:03.957",
  "sourceIdentifier": "productcert@siemens.com"
}