CVE-2025-40350
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver cannot assume the size of the linear data area nor fragments. Fix the bug in mlx5 by generating skb according to xdp_buff after XDP programs run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the layout of an xdp_buff to be unchanged. That is, the linear data area continues to be empty and fragments remain the same.
Leer descripción completaMostrar menos
This may cause the driver to generate erroneous skb or triggering a kernel warning. When an XDP program added linear data through bpf_xdp_adjust_head(), the linear data will be ignored as mlx5e_build_linear_skb() builds an skb without linear data and then pull data from fragments to fill the linear data area. When an XDP program has shrunk the non-linear data through bpf_xdp_adjust_tail(), the delta passed to __pskb_pull_tail() may exceed the actual nonlinear data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the number of fragments changes after the XDP program runs, rewind the end fragment pointer by the difference and recalculate the truesize. Then, build the skb with the linear data area matching the xdp_buff. Finally, only pull data in if there is non-linear data and fill the linear part up to 256 bytes.
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
- Puntuación base: 9.8
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.55%
- Percentil entre todas las CVEs puntuadas: 44
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
🎯 Técnicas ATT&CK
Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.
- Explotación
T1190Exploit Public-Facing Applicationinitial access85 %
Vulnerabilidad remota en kernel Linux (AV:N, PR:N) que causa corrupción de memoria en XDP mediante bpf_xdp_adjust_tail/head, permitiendo DoS o escalada local tras ejecución de código de nivel kernel.
Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.
🛡️ Mitigaciones ATT&CK que cubren estas técnicas
Tecnologías afectadas (1)
⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2025-40350",
"cveTags": [],
"metrics": {
"cvssMetricV31": [
{
"type": "Secondary",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 9.8,
"attackVector": "NETWORK",
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"integrityImpact": "HIGH",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "NONE",
"confidentialityImpact": "HIGH"
},
"impactScore": 5.9,
"exploitabilityScore": 3.9
}
]
},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "f52ac7028bec22e925c8fece4f21641eb13b4d6f",
"lessThan": "8b051d7f530e8a5237da242fbeafef02fec6b813",
"versionType": "git"
},
{
"status": "affected",
"version": "f52ac7028bec22e925c8fece4f21641eb13b4d6f",
"lessThan": "cb9edd583e23979ee546981be963ad5f217e8b18",
"versionType": "git"
},
{
"status": "affected",
"version": "f52ac7028bec22e925c8fece4f21641eb13b4d6f",
"lessThan": "f2557d7fa38e9475b38588f5c124476091480f53",
"versionType": "git"
},
{
"status": "affected",
"version": "f52ac7028bec22e925c8fece4f21641eb13b4d6f",
"lessThan": "87bcef158ac1faca1bd7e0104588e8e2956d10be",
"versionType": "git"
}
],
"programFiles": [
"drivers/net/ethernet/mellanox/mlx5/core/en_rx.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "6.4"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "6.4",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "6.6.115",
"versionType": "semver",
"lessThanOrEqual": "6.6.*"
},
{
"status": "unaffected",
"version": "6.12.56",
"versionType": "semver",
"lessThanOrEqual": "6.12.*"
},
{
"status": "unaffected",
"version": "6.17.6",
"versionType": "semver",
"lessThanOrEqual": "6.17.*"
},
{
"status": "unaffected",
"version": "6.18",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"drivers/net/ethernet/mellanox/mlx5/core/en_rx.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2025-12-16T14:15:46.840",
"references": [
{
"url": "https://git.kernel.org/stable/c/87bcef158ac1faca1bd7e0104588e8e2956d10be",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/8b051d7f530e8a5237da242fbeafef02fec6b813",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/cb9edd583e23979ee546981be963ad5f217e8b18",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/f2557d7fa38e9475b38588f5c124476091480f53",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Deferred",
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ\n\nXDP programs can change the layout of an xdp_buff through\nbpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver\ncannot assume the size of the linear data area nor fragments. Fix the\nbug in mlx5 by generating skb according to xdp_buff after XDP programs\nrun.\n\nCurrently, when handling multi-buf XDP, the mlx5 driver assumes the\nlayout of an xdp_buff to be unchanged. That is, the linear data area\ncontinues to be empty and fragments remain the same. This may cause\nthe driver to generate erroneous skb or triggering a kernel\nwarning. When an XDP program added linear data through\nbpf_xdp_adjust_head(), the linear data will be ignored as\nmlx5e_build_linear_skb() builds an skb without linear data and then\npull data from fragments to fill the linear data area. When an XDP\nprogram has shrunk the non-linear data through bpf_xdp_adjust_tail(),\nthe delta passed to __pskb_pull_tail() may exceed the actual nonlinear\ndata size and trigger the BUG_ON in it.\n\nTo fix the issue, first record the original number of fragments. If the\nnumber of fragments changes after the XDP program runs, rewind the end\nfragment pointer by the difference and recalculate the truesize. Then,\nbuild the skb with the linear data area matching the xdp_buff. Finally,\nonly pull data in if there is non-linear data and fill the linear part\nup to 256 bytes."
}
],
"lastModified": "2026-07-30T06:24:30.907",
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}