« Volver al listado

CVE-2025-40105

Estado: AplazadaAlta (7.8)—

In the Linux kernel, the following vulnerability has been resolved:

vfs: Don't leak disconnected dentries on umount

When user calls open_by_handle_at() on some inode that is not cached, we will create disconnected dentry for it. If such dentry is a directory, exportfs_decode_fh_raw() will then try to connect this dentry to the dentry tree through reconnect_path().

Leer descripción completaMostrar menos

It may happen for various reasons (such as corrupted fs or race with rename) that the call to lookup_one_unlocked() in reconnect_one() will fail to find the dentry we are trying to reconnect and instead create a new dentry under the parent. Now this dentry will not be marked as disconnected although the parent still may well be disconnected (at least in case this inconsistency happened because the fs is corrupted and .. doesn't point to the real parent directory). This creates inconsistency in disconnected flags but AFAICS it was mostly harmless. At least until commit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon") which removed adding of most disconnected dentries to sb->s_anon list. Thus after this commit cleanup of disconnected dentries implicitely relies on the fact that dput() will immediately reclaim such dentries. However when some leaf dentry isn't marked as disconnected, as in the scenario described above, the reclaim doesn't happen and the dentries are "leaked". Memory reclaim can eventually reclaim them but otherwise they stay in memory and if umount comes first, we hit infamous "Busy inodes after unmount" bug. Make sure all dentries created under a disconnected parent are marked as disconnected as well.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad local (AV:L, PR:L) sin interacción que permite escalada de privilegios; el fallo en umount causa corrupción de memoria de dentries y DoS potencial tras remontaje.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2025-40105",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "b5abafd0aa8d7bcb935c8f91e4cfc2f2820759e4",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "20863bb7fbb016379f8227122edfabc5c799bc79",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "8004d4b8cbf1bd68a23c160d57287e177c82cc69",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "7e0c8aaf4e28918abded547a5147c7d52c4af7d2",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "cebfbf40056a4d858b2a3ca59a69936d599bd209",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "620f3b0ede9c5cb4976cd0457d0b04ad551e5d6b",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "eadc49999fa994d6fbd70c332bd5d5051cc42261",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "f1ee616214cb22410e939d963bbb2349c2570f02",
              "lessThan": "56094ad3eaa21e6621396cc33811d8f72847a834",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "fs/dcache.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.16"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "4.16",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "5.4.301",
              "versionType": "semver",
              "lessThanOrEqual": "5.4.*"
            },
            {
              "status": "unaffected",
              "version": "5.10.246",
              "versionType": "semver",
              "lessThanOrEqual": "5.10.*"
            },
            {
              "status": "unaffected",
              "version": "5.15.196",
              "versionType": "semver",
              "lessThanOrEqual": "5.15.*"
            },
            {
              "status": "unaffected",
              "version": "6.1.158",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.114",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.55",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.17.5",
              "versionType": "semver",
              "lessThanOrEqual": "6.17.*"
            },
            {
              "status": "unaffected",
              "version": "6.18",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "fs/dcache.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    },
    {
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
      "affectedData": [
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        },
        {
          "vendor": "Siemens",
          "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
          "versions": [
            {
              "status": "affected",
              "version": "V3.1.6",
              "lessThan": "*",
              "versionType": "custom"
            }
          ],
          "defaultStatus": "unknown"
        }
      ]
    }
  ],
  "published": "2025-10-30T10:15:34.880",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/20863bb7fbb016379f8227122edfabc5c799bc79",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/56094ad3eaa21e6621396cc33811d8f72847a834",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/620f3b0ede9c5cb4976cd0457d0b04ad551e5d6b",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/7e0c8aaf4e28918abded547a5147c7d52c4af7d2",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/8004d4b8cbf1bd68a23c160d57287e177c82cc69",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/b5abafd0aa8d7bcb935c8f91e4cfc2f2820759e4",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/cebfbf40056a4d858b2a3ca59a69936d599bd209",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/eadc49999fa994d6fbd70c332bd5d5051cc42261",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html",
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
    }
  ],
  "vulnStatus": "Deferred",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nvfs: Don't leak disconnected dentries on umount\n\nWhen user calls open_by_handle_at() on some inode that is not cached, we\nwill create disconnected dentry for it. If such dentry is a directory,\nexportfs_decode_fh_raw() will then try to connect this dentry to the\ndentry tree through reconnect_path(). It may happen for various reasons\n(such as corrupted fs or race with rename) that the call to\nlookup_one_unlocked() in reconnect_one() will fail to find the dentry we\nare trying to reconnect and instead create a new dentry under the\nparent. Now this dentry will not be marked as disconnected although the\nparent still may well be disconnected (at least in case this\ninconsistency happened because the fs is corrupted and .. doesn't point\nto the real parent directory). This creates inconsistency in\ndisconnected flags but AFAICS it was mostly harmless. At least until\ncommit f1ee616214cb (\"VFS: don't keep disconnected dentries on d_anon\")\nwhich removed adding of most disconnected dentries to sb->s_anon list.\nThus after this commit cleanup of disconnected dentries implicitely\nrelies on the fact that dput() will immediately reclaim such dentries.\nHowever when some leaf dentry isn't marked as disconnected, as in the\nscenario described above, the reclaim doesn't happen and the dentries\nare \"leaked\". Memory reclaim can eventually reclaim them but otherwise\nthey stay in memory and if umount comes first, we hit infamous \"Busy\ninodes after unmount\" bug. Make sure all dentries created under a\ndisconnected parent are marked as disconnected as well."
    }
  ],
  "lastModified": "2026-07-30T06:24:11.963",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}