« Volver al listado

CVE-2025-39928

Estado: ModificadaMedia (5.5)—

In the Linux kernel, the following vulnerability has been resolved:

i2c: rtl9300: ensure data length is within supported range

Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer' to ensure the data length isn't within the supported range. In particular a data length of 0 is not supported by the hardware and causes unintended or destructive behaviour.

This limitation becomes obvious when looking at the register documentation [1]. 4 bits are reserved for DATA_WIDTH and the value of these 4 bits is used as N + 1, allowing a data length range of 1 <= len <= 16.

Affected by this is the SMBus Quick Operation which works with a data length of 0. Passing 0 as the length causes an underflow of the value due to:

Leer descripción completaMostrar menos

(len - 1) & 0xf

and effectively specifying a transfer length of 16 via the registers. This causes a 16-byte write operation instead of a Quick Write. For example, on SFP modules without write-protected EEPROM this soft-bricks them by overwriting some initial bytes.

For completeness, also add a quirk for the zero length.

[1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

Tecnologías afectadas (1)

Linux — Linux Kernel

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2025-39928",
  "cveTags": [],
  "metrics": {
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2025-39928",
          "role": "CISA Coordinator",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "version": "2.0.3",
          "timestamp": "2026-01-14T17:39:24.283668Z"
        }
      }
    ],
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.1,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 5.2,
        "exploitabilityScore": 1.8
      },
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 5.5,
          "attackVector": "LOCAL",
          "baseSeverity": "MEDIUM",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 1.8
      },
      {
        "type": "Secondary",
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 5.5,
          "attackVector": "LOCAL",
          "baseSeverity": "MEDIUM",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "c366be720235301fdadf67e6f1ea6ff32669c074",
              "lessThan": "c91382328fc89f73144d5582f2d8f1dd3e41c8f7",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c366be720235301fdadf67e6f1ea6ff32669c074",
              "lessThan": "06418cb5a1a542a003fdb4ad8e76ea542d57cfba",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/i2c/busses/i2c-rtl9300.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.13"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.13",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.16.8",
              "versionType": "semver",
              "lessThanOrEqual": "6.16.*"
            },
            {
              "status": "unaffected",
              "version": "6.17",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/i2c/busses/i2c-rtl9300.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2025-10-01T08:15:36.230",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/06418cb5a1a542a003fdb4ad8e76ea542d57cfba",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c91382328fc89f73144d5582f2d8f1dd3e41c8f7",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-191"
        }
      ]
    },
    {
      "type": "Secondary",
      "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
      "description": [
        {
          "lang": "en",
          "value": "CWE-191"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ni2c: rtl9300: ensure data length is within supported range\n\nAdd an explicit check for the xfer length to 'rtl9300_i2c_config_xfer'\nto ensure the data length isn't within the supported range. In\nparticular a data length of 0 is not supported by the hardware and\ncauses unintended or destructive behaviour.\n\nThis limitation becomes obvious when looking at the register\ndocumentation [1]. 4 bits are reserved for DATA_WIDTH and the value\nof these 4 bits is used as N + 1, allowing a data length range of\n1 <= len <= 16.\n\nAffected by this is the SMBus Quick Operation which works with a data\nlength of 0. Passing 0 as the length causes an underflow of the value\ndue to:\n\n(len - 1) & 0xf\n\nand effectively specifying a transfer length of 16 via the registers.\nThis causes a 16-byte write operation instead of a Quick Write. For\nexample, on SFP modules without write-protected EEPROM this soft-bricks\nthem by overwriting some initial bytes.\n\nFor completeness, also add a quirk for the zero length.\n\n[1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2"
    }
  ],
  "lastModified": "2026-07-30T06:23:57.523",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "8DA00A4E-AABB-4A69-AB39-67B22D0B36D2",
              "versionEndExcluding": "6.16.8",
              "versionStartIncluding": "6.13"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.17:rc1:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "327D22EF-390B-454C-BD31-2ED23C998A1C"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.17:rc2:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "C730CD9A-D969-4A8E-9522-162AAF7C0EE9"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.17:rc3:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "39982C4B-716E-4B2F-8196-FA301F47807D"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.17:rc4:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "340BEEA9-D70D-4290-B502-FBB1032353B1"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}