CVE-2025-38040
In the Linux kernel, the following vulnerability has been resolved:
serial: mctrl_gpio: split disable_ms into sync and no_sync APIs
The following splat has been observed on a SAMA5D27 platform using atmel_serial:
This warning is emitted when trying to toggle, at the highest level, some flow control (with serdev_device_set_flow_control) in a device driver. At the lowest level, the atmel_serial driver is using serial_mctrl_gpio lib to enable/disable the corresponding IRQs accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to disable_irq (called in mctrl_gpio_disable_ms) being possibly called in some atomic context (some tty drivers perform modem lines configuration in regions protected by port lock).
Leer descripción completaMostrar menos
Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one and a blocking one. Replace mctrl_gpio_disable_ms calls with the relevant version depending on whether the call is protected by some port lock.
Detalles técnicos trazas, registros y código del informe original
BUG: sleeping function called from invalid context at kernel/irq/manage.c:738 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0 preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<00000000>] 0x0 hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74 Hardware name: Atmel SAMA5 Workqueue: hci0 hci_power_on [bluetooth] Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x44/0x70 dump_stack_lvl from __might_resched+0x38c/0x598 __might_resched from disable_irq+0x1c/0x48 disable_irq from mctrl_gpio_disable_ms+0x74/0xc0 mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4 atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8 atmel_set_termios from uart_change_line_settings+0x15c/0x994 uart_change_line_settings from uart_set_termios+0x2b0/0x668 uart_set_termios from tty_set_termios+0x600/0x8ec tty_set_termios from ttyport_set_flow_control+0x188/0x1e0 ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc] wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth] hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth] hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth] hci_power_on [bluetooth] from process_one_work+0x998/0x1a38 process_one_work from worker_thread+0x6e0/0xfb4 worker_thread from kthread+0x3d4/0x484 kthread from ret_from_fork+0x14/0x28
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
- Puntuación base: 5.5
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.19%
- Percentil entre todas las CVEs puntuadas: 8
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (2)
CWE
- NVD-CWE-noinfo
Referencias
- https://git.kernel.org/stable/c/1bd2aad57da95f7f2d2bb52f7ad15c0f4993a685
- https://git.kernel.org/stable/c/68435c1fa3db696db4f480385db9e50e26691d0d
- https://git.kernel.org/stable/c/7187ec6b0b9ff22ebac2c3bb4178b7dbbdc0a55a
- https://git.kernel.org/stable/c/c504c11b94d6e4ad818ca5578dffa8ff29ad0f20
- https://git.kernel.org/stable/c/e6a46719a2369eb5186d4f7e6c0478720ca1ec3d
- https://lists.debian.org/debian-lts-announce/2025/10/msg00008.html
JSON original (NVD)
Mostrar
{
"id": "CVE-2025-38040",
"cveTags": [],
"metrics": {
"cvssMetricV31": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 5.5,
"attackVector": "LOCAL",
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"integrityImpact": "NONE",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "LOW",
"confidentialityImpact": "NONE"
},
"impactScore": 3.6,
"exploitabilityScore": 1.8
}
]
},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "ce59e48fdbad2aa6609ceb87e1306ec69e577e05",
"lessThan": "68435c1fa3db696db4f480385db9e50e26691d0d",
"versionType": "git"
},
{
"status": "affected",
"version": "ce59e48fdbad2aa6609ceb87e1306ec69e577e05",
"lessThan": "c504c11b94d6e4ad818ca5578dffa8ff29ad0f20",
"versionType": "git"
},
{
"status": "affected",
"version": "ce59e48fdbad2aa6609ceb87e1306ec69e577e05",
"lessThan": "e6a46719a2369eb5186d4f7e6c0478720ca1ec3d",
"versionType": "git"
},
{
"status": "affected",
"version": "ce59e48fdbad2aa6609ceb87e1306ec69e577e05",
"lessThan": "7187ec6b0b9ff22ebac2c3bb4178b7dbbdc0a55a",
"versionType": "git"
},
{
"status": "affected",
"version": "ce59e48fdbad2aa6609ceb87e1306ec69e577e05",
"lessThan": "1bd2aad57da95f7f2d2bb52f7ad15c0f4993a685",
"versionType": "git"
}
],
"programFiles": [
"Documentation/driver-api/serial/driver.rst",
"drivers/tty/serial/8250/8250_port.c",
"drivers/tty/serial/atmel_serial.c",
"drivers/tty/serial/imx.c",
"drivers/tty/serial/serial_mctrl_gpio.c",
"drivers/tty/serial/serial_mctrl_gpio.h",
"drivers/tty/serial/sh-sci.c",
"drivers/tty/serial/stm32-usart.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "4.4"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "4.4",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "6.1.141",
"versionType": "semver",
"lessThanOrEqual": "6.1.*"
},
{
"status": "unaffected",
"version": "6.6.93",
"versionType": "semver",
"lessThanOrEqual": "6.6.*"
},
{
"status": "unaffected",
"version": "6.12.31",
"versionType": "semver",
"lessThanOrEqual": "6.12.*"
},
{
"status": "unaffected",
"version": "6.14.9",
"versionType": "semver",
"lessThanOrEqual": "6.14.*"
},
{
"status": "unaffected",
"version": "6.15",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"Documentation/driver-api/serial/driver.rst",
"drivers/tty/serial/8250/8250_port.c",
"drivers/tty/serial/atmel_serial.c",
"drivers/tty/serial/imx.c",
"drivers/tty/serial/serial_mctrl_gpio.c",
"drivers/tty/serial/serial_mctrl_gpio.h",
"drivers/tty/serial/sh-sci.c",
"drivers/tty/serial/stm32-usart.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2025-06-18T10:15:36.400",
"references": [
{
"url": "https://git.kernel.org/stable/c/1bd2aad57da95f7f2d2bb52f7ad15c0f4993a685",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/68435c1fa3db696db4f480385db9e50e26691d0d",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/7187ec6b0b9ff22ebac2c3bb4178b7dbbdc0a55a",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/c504c11b94d6e4ad818ca5578dffa8ff29ad0f20",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/e6a46719a2369eb5186d4f7e6c0478720ca1ec3d",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2025/10/msg00008.html",
"tags": [
"Third Party Advisory"
],
"source": "af854a3a-2127-422b-91ae-364da2661108"
}
],
"vulnStatus": "Analyzed",
"weaknesses": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"description": [
{
"lang": "en",
"value": "NVD-CWE-noinfo"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: mctrl_gpio: split disable_ms into sync and no_sync APIs\n\nThe following splat has been observed on a SAMA5D27 platform using\natmel_serial:\n\nBUG: sleeping function called from invalid context at kernel/irq/manage.c:738\nin_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0\npreempt_count: 1, expected: 0\nINFO: lockdep is turned off.\nirq event stamp: 0\nhardirqs last enabled at (0): [<00000000>] 0x0\nhardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec\nsoftirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec\nsoftirqs last disabled at (0): [<00000000>] 0x0\nCPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74\nHardware name: Atmel SAMA5\nWorkqueue: hci0 hci_power_on [bluetooth]\nCall trace:\n unwind_backtrace from show_stack+0x18/0x1c\n show_stack from dump_stack_lvl+0x44/0x70\n dump_stack_lvl from __might_resched+0x38c/0x598\n __might_resched from disable_irq+0x1c/0x48\n disable_irq from mctrl_gpio_disable_ms+0x74/0xc0\n mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4\n atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8\n atmel_set_termios from uart_change_line_settings+0x15c/0x994\n uart_change_line_settings from uart_set_termios+0x2b0/0x668\n uart_set_termios from tty_set_termios+0x600/0x8ec\n tty_set_termios from ttyport_set_flow_control+0x188/0x1e0\n ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc]\n wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth]\n hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth]\n hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth]\n hci_power_on [bluetooth] from process_one_work+0x998/0x1a38\n process_one_work from worker_thread+0x6e0/0xfb4\n worker_thread from kthread+0x3d4/0x484\n kthread from ret_from_fork+0x14/0x28\n\nThis warning is emitted when trying to toggle, at the highest level,\nsome flow control (with serdev_device_set_flow_control) in a device\ndriver. At the lowest level, the atmel_serial driver is using\nserial_mctrl_gpio lib to enable/disable the corresponding IRQs\naccordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to\ndisable_irq (called in mctrl_gpio_disable_ms) being possibly called in\nsome atomic context (some tty drivers perform modem lines configuration\nin regions protected by port lock).\n\nSplit mctrl_gpio_disable_ms into two differents APIs, a non-blocking one\nand a blocking one. Replace mctrl_gpio_disable_ms calls with the\nrelevant version depending on whether the call is protected by some port\nlock."
},
{
"lang": "es",
"value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: serial: mctrl_gpio: divide disabled_ms en API sync y no_sync Se ha observado el siguiente splat en una plataforma SAMA5D27 usando atmel_serial: BUG: función inactiva llamada desde un contexto no válido en kernel/irq/manage.c:738 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0 preempt_count: 1, expected: 0 INFO: lockdep está desactivado. Marca de evento irq: 0 hardirqs habilitados por última vez en (0): [<00000000>] 0x0 hardirqs deshabilitados por última vez en (0): [] copy_process+0x1c4c/0x7bec softirqs habilitados por última vez en (0): [] copy_process+0x1ca0/0x7bec softirqs deshabilitados por última vez en (0): [<00000000>] 0x0 CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 No contaminado 6.13.0-rc7+ #74 Nombre del hardware: Atmel SAMA5 Cola de trabajo: hci0 hci_power_on [bluetooth] Rastreo de llamadas: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x44/0x70 dump_stack_lvl from __might_resched+0x38c/0x598 __might_resched from disable_irq+0x1c/0x48 disable_irq from mctrl_gpio_disable_ms+0x74/0xc0 mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4 atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8 atmel_set_termios from uart_change_line_settings+0x15c/0x994 uart_change_line_settings from uart_set_termios+0x2b0/0x668 uart_set_termios from tty_set_termios+0x600/0x8ec tty_set_termios from ttyport_set_flow_control+0x188/0x1e0 ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc] wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth] hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth] hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth] hci_power_on [bluetooth] from process_one_work+0x998/0x1a38 process_one_work from worker_thread+0x6e0/0xfb4 worker_thread from kthread+0x3d4/0x484 kthread from ret_from_fork+0x14/0x28 Esta advertencia se emite al intentar alternar, en el nivel más alto, algún control de flujo (con serdev_device_set_flow_control) en un controlador de dispositivo. En el nivel más bajo, el controlador atmel_serial está usando la librería serial_mctrl_gpio para habilitar/deshabilitar las IRQ correspondientes según corresponda. La advertencia emitida por CONFIG_DEBUG_ATOMIC_SLEEP se debe a que la función disabled_irq (llamada en mctrl_gpio_disable_ms) posiblemente se llama en algún contexto atómico (algunos controladores tty realizan la configuración de líneas de módem en regiones protegidas por bloqueo de puerto). Divida mctrl_gpio_disable_ms en dos API diferentes, una sin bloqueo y otra con bloqueo. Reemplace las llamadas a mctrl_gpio_disable_ms con la versión relevante dependiendo de si la llamada está protegida por algún bloqueo de puerto."
}
],
"lastModified": "2026-06-17T09:15:56.070",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "499998F9-9F80-4E5B-895F-CF94A48EC1EF",
"versionEndExcluding": "6.1.141"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "50A4A9DE-24AB-4FB4-AACD-85D8EABB0571",
"versionEndExcluding": "6.6.93",
"versionStartIncluding": "6.2"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "1AE98841-5774-4B45-A81C-2D188DB7E5C3",
"versionEndExcluding": "6.12.31",
"versionStartIncluding": "6.7"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "A9B72DD1-715C-4101-A720-1C8D70044C06",
"versionEndExcluding": "6.14.9",
"versionStartIncluding": "6.13"
}
],
"operator": "OR"
}
]
},
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:debian:debian_linux:11.0:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "FA6FEEC2-9F11-4643-8827-749718254FED"
}
],
"operator": "OR"
}
]
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}