CVE-2025-2399
Estado: Pendiente de análisisMedia (5.9)—
Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, and M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70 allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683.
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H
- Puntuación base: 5.9
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.52%
- Percentil entre todas las CVEs puntuadas: 42
- Fecha de la puntuación: 5/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (9)
⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.
Mitsubishielectric — CNC C80 SeriesAIMitsubishielectric — CNC E70 SeriesAIMitsubishielectric — CNC E80 SeriesAIMitsubishielectric — CNC M700v SeriesAIMitsubishielectric — CNC M70v SeriesAIMitsubishielectric — CNC M800 SeriesAIMitsubishielectric — CNC M800v SeriesAIMitsubishielectric — CNC M80 SeriesAIMitsubishielectric — CNC M80v SeriesAI
CWE
- CWE-1285
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2025-2399",
"cveTags": [],
"metrics": {
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2025-2399",
"role": "CISA Coordinator",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"version": "2.0.3",
"timestamp": "2026-03-10T17:31:56.365207Z"
}
}
],
"cvssMetricV31": [
{
"type": "Secondary",
"source": "Mitsubishielectric.Psirt@yd.MitsubishiElectric.co.jp",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 5.9,
"attackVector": "NETWORK",
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
"integrityImpact": "NONE",
"userInteraction": "NONE",
"attackComplexity": "HIGH",
"availabilityImpact": "HIGH",
"privilegesRequired": "NONE",
"confidentialityImpact": "NONE"
},
"impactScore": 3.6,
"exploitabilityScore": 2.2
}
]
},
"affected": [
{
"source": "Mitsubishielectric.Psirt@yd.MitsubishiElectric.co.jp",
"affectedData": [
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M800V Series M800VW",
"versions": [
{
"status": "affected",
"version": "System Number BND-2051W000 versions BB and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M800V Series M800VS",
"versions": [
{
"status": "affected",
"version": "System Number BND-2052W000 versions BB and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M80V Series M80V",
"versions": [
{
"status": "affected",
"version": "System Number BND-2053W000 versions BB and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M80V Series M80VW",
"versions": [
{
"status": "affected",
"version": "System Number BND-2054W000 versions BB and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M800 Series M800W",
"versions": [
{
"status": "affected",
"version": "System Number BND-2005W000 versions FM and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M800 Series M800S",
"versions": [
{
"status": "affected",
"version": "System Number BND-2006W000 versions FM and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M80 Series M80",
"versions": [
{
"status": "affected",
"version": "System Number BND-2007W000 versions FM and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M80 Series M80W",
"versions": [
{
"status": "affected",
"version": "System Number BND-2008W000 versions FM and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC E80 Series E80",
"versions": [
{
"status": "affected",
"version": "System Number BND-2009W000 versions FM and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC C80 Series C80",
"versions": [
{
"status": "affected",
"version": "System Number BND-2036W000 all versions"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M700V Series M750VW",
"versions": [
{
"status": "affected",
"version": "System Number BND-1015W002 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M700V Series M720VW",
"versions": [
{
"status": "affected",
"version": "System Number BND-1015W000 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M700V Series M730VW",
"versions": [
{
"status": "affected",
"version": "System Number BND-1015W000 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M700V Series M720VS",
"versions": [
{
"status": "affected",
"version": "System Number BND-1012W000 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M700V Series M730VS",
"versions": [
{
"status": "affected",
"version": "System Number BND-1012W000 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M700V Series M750VS",
"versions": [
{
"status": "affected",
"version": "System Number BND-1012W002 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC M70V Series M70V",
"versions": [
{
"status": "affected",
"version": "System Number BND-1018W000 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
},
{
"vendor": "Mitsubishi Electric Corporation",
"product": "Mitsubishi Electric CNC E70 Series E70",
"versions": [
{
"status": "affected",
"version": "System Number BND-1022W000 versions LJ and prior"
}
],
"defaultStatus": "unaffected"
}
]
}
],
"published": "2026-03-10T16:44:08.217",
"references": [
{
"url": "https://jvn.jp/vu/JVNVU95523788/",
"source": "Mitsubishielectric.Psirt@yd.MitsubishiElectric.co.jp"
},
{
"url": "https://www.mitsubishielectric.com/en/psirt/vulnerability/pdf/2025-022_en.pdf",
"source": "Mitsubishielectric.Psirt@yd.MitsubishiElectric.co.jp"
}
],
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"type": "Secondary",
"source": "Mitsubishielectric.Psirt@yd.MitsubishiElectric.co.jp",
"description": [
{
"lang": "en",
"value": "CWE-1285"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, and M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70 allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683."
},
{
"lang": "es",
"value": "Vulnerabilidad de validación incorrecta de índice, posición o desplazamiento especificados en la entrada en Mitsubishi Electric CNC Serie M800V M800VW y M800VS, Serie M80V M80V y M80VW, Serie M800 M800W y M800S, Serie M80 M80 y M80W, Serie E80 E80, Serie C80 C80, Serie M700V M750VW, M720VW, 730VW, M720VS, M730VS, y M750VS, Serie M70V M70V, Serie E70 E70, y Herramientas de software NC Trainer2 y NC Trainer2 plus permite a un atacante remoto causar una lectura fuera de límites, lo que resulta en una condición de denegación de servicio al enviar paquetes especialmente diseñados al puerto TCP 683."
}
],
"lastModified": "2026-08-27T10:16:34.047",
"sourceIdentifier": "Mitsubishielectric.Psirt@yd.MitsubishiElectric.co.jp"
}