« Volver al listado

CVE-2024-11666

Estado: AnalizadaCrítica (9.8)—

Affected devices beacon to eCharge cloud infrastructure asking if there are any command they should run. This communication is established over an insecure channel since peer verification is disabled everywhere. Therefore, remote unauthenticated users  suitably positioned on the network between an EV charger controller and eCharge infrastructure can execute arbitrary commands with elevated privileges on affected devices.

This issue affects cph2_echarge_firmware: through 2.0.4.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

AV:N/PR:N/UI:N indica explotación remota sin autenticación (T1190). La ejecución de comandos arbitrarios con privilegios elevados es el impacto principal (T1059). El ataque requiere posición de red entre dispositivo e infraestructura (man-in-the-middle por falta de verificación de certificados, T155

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Privileged Account ManagementNetwork SegmentationLimit Access to Resource Over NetworkFilter Network TrafficDisable or Remove Feature or ProgramVulnerability Scanning

Tecnologías afectadas (1)

Echarge — Salia Plcc Firmware

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2024-11666",
  "cveTags": [],
  "metrics": {
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2024-11666",
          "role": "CISA Coordinator",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "version": "2.0.3",
          "timestamp": "2024-11-25T01:27:53.302041Z"
        }
      }
    ],
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "research@onekey.com",
        "cvssData": {
          "scope": "CHANGED",
          "version": "3.1",
          "baseScore": 9,
          "attackVector": "NETWORK",
          "baseSeverity": "CRITICAL",
          "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "HIGH",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 6,
        "exploitabilityScore": 2.2
      },
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 9.8,
          "attackVector": "NETWORK",
          "baseSeverity": "CRITICAL",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 3.9
      }
    ]
  },
  "affected": [
    {
      "source": "research@onekey.com",
      "affectedData": [
        {
          "vendor": "hardy-barth",
          "product": "cph2_echarge_firmware",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "versionType": "semver",
              "lessThanOrEqual": "2.0.4"
            }
          ],
          "defaultStatus": "unaffected"
        }
      ]
    },
    {
      "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
      "affectedData": [
        {
          "cpes": [
            "cpe:2.3:o:hardy-barth:cph2_echarge_firmware:*:*:*:*:*:*:*:*"
          ],
          "vendor": "hardy-barth",
          "product": "cph2_echarge_firmware",
          "versions": [
            {
              "status": "affected",
              "version": "0",
              "versionType": "semver",
              "lessThanOrEqual": "2.0.4"
            }
          ],
          "defaultStatus": "unaffected"
        }
      ]
    }
  ],
  "published": "2024-11-24T23:15:04.030",
  "references": [
    {
      "url": "https://www.onekey.com/resource/critical-vulnerabilities-in-ev-charging-stations-analysis-of-echarge-controllers",
      "tags": [
        "Exploit",
        "Third Party Advisory"
      ],
      "source": "research@onekey.com"
    }
  ],
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "type": "Secondary",
      "source": "research@onekey.com",
      "description": [
        {
          "lang": "en",
          "value": "CWE-345"
        }
      ]
    },
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-345"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "Affected devices beacon to eCharge cloud infrastructure asking if there are any command they should run. This communication is established over an insecure channel since peer verification is disabled everywhere. Therefore, remote unauthenticated users  suitably positioned on the network between an EV charger controller and eCharge infrastructure can execute arbitrary commands with elevated privileges on affected devices.\n\nThis issue affects cph2_echarge_firmware: through 2.0.4."
    },
    {
      "lang": "es",
      "value": "Los dispositivos afectados envían señales a la infraestructura en la nube de eCharge para preguntar si hay algún comando que deban ejecutar. Esta comunicación se establece a través de un canal inseguro, ya que la verificación entre pares está deshabilitada en todas partes. Por lo tanto, los usuarios remotos no autenticados ubicados adecuadamente en la red entre un controlador de cargador de vehículos eléctricos y la infraestructura de eCharge pueden ejecutar comandos arbitrarios con privilegios elevados en los dispositivos afectados. Este problema afecta a cph2_echarge_firmware: hasta la versión 2.0.4."
    }
  ],
  "lastModified": "2026-06-17T06:58:11.483",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:echarge:salia_plcc_firmware:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "68BE2BFC-8664-4D95-AB52-0724D268B9AA",
              "versionEndIncluding": "2.0.4"
            }
          ],
          "operator": "OR"
        },
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:echarge:salia_plcc:-:*:*:*:*:*:*:*",
              "vulnerable": false,
              "matchCriteriaId": "7ABECA31-3F68-4CAC-991F-7EC594A2A779"
            }
          ],
          "operator": "OR"
        }
      ],
      "operator": "AND"
    }
  ],
  "sourceIdentifier": "research@onekey.com"
}