CVE-2023-53634
Estado: AnalizadaMedia (5.5)—
In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fixed a BTI error on returning to patched function
When BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump back to the instruction next to call site to call the patched function. For BTI-enabled kernel, the instruction next to call site is usually PACIASP, in this case, it's safe to jump back with BLR. But when the call site is not followed by a PACIASP or bti, a BTI exception is triggered.
Here is a fault log:
And the instruction next to call site of bpf_fentry_test1 is ADD, not PACIASP:
For BPF prog, JIT always puts a PACIASP after call site for BTI-enabled kernel, so there is no problem. To fix it, replace BLR with RET to bypass the branch target check.
Detalles técnicos trazas, registros y código del informe original
Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI CPU: 0 PID: 263 Comm: test_progs Tainted: GF Hardware name: linux,dummy-virt (DT) pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c) pc : bpf_fentry_test1+0xc/0x30 lr : bpf_trampoline_6442573892_0+0x48/0x1000 sp : ffff80000c0c3a50 x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050 x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101 x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001 x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001 Kernel panic - not syncing: Unhandled exception CPU: 0 PID: 263 Comm: test_progs Tainted: GF Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xec/0x144 show_stack+0x24/0x7c dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 panic+0x1cc/0x3ec __el0_error_handler_common+0x0/0x130 el1h_64_sync_handler+0x60/0xd0 el1h_64_sync+0x78/0x7c bpf_fentry_test1+0xc/0x30 bpf_fentry_test1+0xc/0x30 bpf_prog_test_run_tracing+0xdc/0x2a0 __sys_bpf+0x438/0x22a0 __arm64_sys_bpf+0x30/0x54 invoke_syscall+0x78/0x110 el0_svc_common.constprop.0+0x6c/0x1d0 do_el0_svc+0x38/0xe0 el0_svc+0x30/0xd0 el0t_64_sync_handler+0x1ac/0x1b0 el0t_64_sync+0x1a0/0x1a4 Kernel Offset: disabled CPU features: 0x0000,00034c24,f994fdab Memory Limit: none <bpf_fentry_test1>: bti c nop nop add w0, w0, #0x1 paciasp
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
- Puntuación base: 5.5
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.21%
- Percentil entre todas las CVEs puntuadas: 10
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (1)
CWE
- NVD-CWE-noinfo
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2023-53634",
"cveTags": [],
"metrics": {
"cvssMetricV31": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 5.5,
"attackVector": "LOCAL",
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"integrityImpact": "NONE",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "LOW",
"confidentialityImpact": "NONE"
},
"impactScore": 3.6,
"exploitabilityScore": 1.8
}
]
},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "efc9909fdce00a827a37609628223cd45bf95d0b",
"lessThan": "8b9c64942ada229f52fe6f1b537a50f88b3c2673",
"versionType": "git"
},
{
"status": "affected",
"version": "efc9909fdce00a827a37609628223cd45bf95d0b",
"lessThan": "eabc166919d169e105263974991f52b0351e431a",
"versionType": "git"
},
{
"status": "affected",
"version": "efc9909fdce00a827a37609628223cd45bf95d0b",
"lessThan": "738a96c4a8c36950803fdd27e7c30aca92dccefd",
"versionType": "git"
}
],
"programFiles": [
"arch/arm64/net/bpf_jit.h",
"arch/arm64/net/bpf_jit_comp.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "6.0"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "6.0",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "6.1.25",
"versionType": "semver",
"lessThanOrEqual": "6.1.*"
},
{
"status": "unaffected",
"version": "6.2.12",
"versionType": "semver",
"lessThanOrEqual": "6.2.*"
},
{
"status": "unaffected",
"version": "6.3",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"arch/arm64/net/bpf_jit.h",
"arch/arm64/net/bpf_jit_comp.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2025-10-07T16:15:46.523",
"references": [
{
"url": "https://git.kernel.org/stable/c/738a96c4a8c36950803fdd27e7c30aca92dccefd",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/8b9c64942ada229f52fe6f1b537a50f88b3c2673",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/eabc166919d169e105263974991f52b0351e431a",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Analyzed",
"weaknesses": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"description": [
{
"lang": "en",
"value": "NVD-CWE-noinfo"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf, arm64: Fixed a BTI error on returning to patched function\n\nWhen BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump\nback to the instruction next to call site to call the patched function.\nFor BTI-enabled kernel, the instruction next to call site is usually\nPACIASP, in this case, it's safe to jump back with BLR. But when\nthe call site is not followed by a PACIASP or bti, a BTI exception\nis triggered.\n\nHere is a fault log:\n\n Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI\n CPU: 0 PID: 263 Comm: test_progs Tainted: GF\n Hardware name: linux,dummy-virt (DT)\n pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)\n pc : bpf_fentry_test1+0xc/0x30\n lr : bpf_trampoline_6442573892_0+0x48/0x1000\n sp : ffff80000c0c3a50\n x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000\n x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050\n x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a\n x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000\n x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0\n x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000\n x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528\n x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101\n x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001\n x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001\n Kernel panic - not syncing: Unhandled exception\n CPU: 0 PID: 263 Comm: test_progs Tainted: GF\n Hardware name: linux,dummy-virt (DT)\n Call trace:\n dump_backtrace+0xec/0x144\n show_stack+0x24/0x7c\n dump_stack_lvl+0x8c/0xb8\n dump_stack+0x18/0x34\n panic+0x1cc/0x3ec\n __el0_error_handler_common+0x0/0x130\n el1h_64_sync_handler+0x60/0xd0\n el1h_64_sync+0x78/0x7c\n bpf_fentry_test1+0xc/0x30\n bpf_fentry_test1+0xc/0x30\n bpf_prog_test_run_tracing+0xdc/0x2a0\n __sys_bpf+0x438/0x22a0\n __arm64_sys_bpf+0x30/0x54\n invoke_syscall+0x78/0x110\n el0_svc_common.constprop.0+0x6c/0x1d0\n do_el0_svc+0x38/0xe0\n el0_svc+0x30/0xd0\n el0t_64_sync_handler+0x1ac/0x1b0\n el0t_64_sync+0x1a0/0x1a4\n Kernel Offset: disabled\n CPU features: 0x0000,00034c24,f994fdab\n Memory Limit: none\n\nAnd the instruction next to call site of bpf_fentry_test1 is ADD,\nnot PACIASP:\n\n<bpf_fentry_test1>:\n\tbti c\n\tnop\n\tnop\n\tadd w0, w0, #0x1\n\tpaciasp\n\nFor BPF prog, JIT always puts a PACIASP after call site for BTI-enabled\nkernel, so there is no problem. To fix it, replace BLR with RET to bypass\nthe branch target check."
}
],
"lastModified": "2026-06-17T06:45:45.787",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "D2C90BB9-CA3C-4D97-9D92-C46FE5B9B2EC",
"versionEndExcluding": "6.1.25",
"versionStartIncluding": "6.0"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "4AA01E0B-227C-4686-AC91-BA30BCC48E6D",
"versionEndExcluding": "6.2.12",
"versionStartIncluding": "6.2"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.3:rc1:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "B8E3B0E8-FA27-4305-87BB-AF6C25B160CB"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.3:rc2:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "A47F0FC3-CE52-4BA1-BA51-22F783938431"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.3:rc3:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "3583026A-27EC-4A4C-850A-83F2AF970673"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.3:rc4:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "DC271202-7570-4505-89A4-D602D47BFD00"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.3:rc5:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "D413BB6D-4F74-4C7D-9163-47786619EF53"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.3:rc6:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "F4D613FB-9976-4989-8C4A-567773373CEA"
}
],
"operator": "OR"
}
]
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}