CVE-2023-53067
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Only call get_timer_irq() once in constant_clockevent_init()
Under CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_PREEMPT=y, we can see the following messages on LoongArch, this is because using might_sleep() in preemption disable context.
Here are the complete call chains:
In order to avoid the above issue, we should break the call chains, using timer_irq_installed variable as check condition to only call get_timer_irq() once in constant_clockevent_init() is a simple and proper way.
Detalles técnicos trazas, registros y código del informe original
[ 0.001127] smp: Bringing up secondary CPUs ...
[ 0.001222] Booting CPU#1...
[ 0.001244] 64-bit Loongson Processor probed (LA464 Core)
[ 0.001247] CPU1 revision is: 0014c012 (Loongson-64bit)
[ 0.001250] FPU1 revision is: 00000000
[ 0.001252] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
[ 0.001255] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[ 0.001257] preempt_count: 1, expected: 0
[ 0.001258] RCU nest depth: 0, expected: 0
[ 0.001259] Preemption disabled at:
[ 0.001261] [<9000000000223800>] arch_dup_task_struct+0x20/0x110
[ 0.001272] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc7+ #43
[ 0.001275] Hardware name: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V4.0.05132-beta10 12/13/202
[ 0.001277] Stack : 0072617764726148 0000000000000000 9000000000222f1c 90000001001e0000
[ 0.001286] 90000001001e3be0 90000001001e3be8 0000000000000000 0000000000000000
[ 0.001292] 90000001001e3be8 0000000000000040 90000001001e3cb8 90000001001e3a50
[ 0.001297] 9000000001642000 90000001001e3be8 be694d10ce4139dd 9000000100174500
[ 0.001303] 0000000000000001 0000000000000001 00000000ffffe0a2 0000000000000020
[ 0.001309] 000000000000002f 9000000001354116 00000000056b0000 ffffffffffffffff
[ 0.001314] 0000000000000000 0000000000000000 90000000014f6e90 9000000001642000
[ 0.001320] 900000000022b69c 0000000000000001 0000000000000000 9000000001736a90
[ 0.001325] 9000000100038000 0000000000000000 9000000000222f34 0000000000000000
[ 0.001331] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[ 0.001337] ...
[ 0.001339] Call Trace:
[ 0.001342] [<9000000000222f34>] show_stack+0x5c/0x180
[ 0.001346] [<90000000010bdd80>] dump_stack_lvl+0x60/0x88
[ 0.001352] [<9000000000266418>] __might_resched+0x180/0x1cc
[ 0.001356] [<90000000010c742c>] mutex_lock+0x20/0x64
[ 0.001359] [<90000000002a8ccc>] irq_find_matching_fwspec+0x48/0x124
[ 0.001364] [<90000000002259c4>] constant_clockevent_init+0x68/0x204
[ 0.001368] [<900000000022acf4>] start_secondary+0x40/0xa8
[ 0.001371] [<90000000010c0124>] smpboot_entry+0x60/0x64
smpboot_entry()
start_secondary()
constant_clockevent_init()
get_timer_irq()
irq_find_matching_fwnode()
irq_find_matching_fwspec()
mutex_lock()
might_sleep()
__might_sleep()
__might_resched()CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
- Puntuación base: 5.5
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.20%
- Percentil entre todas las CVEs puntuadas: 9
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (1)
CWE
- NVD-CWE-noinfo
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2023-53067",
"cveTags": [],
"metrics": {
"cvssMetricV31": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 5.5,
"attackVector": "LOCAL",
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"integrityImpact": "NONE",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "LOW",
"confidentialityImpact": "NONE"
},
"impactScore": 3.6,
"exploitabilityScore": 1.8
}
]
},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "fa96b57c149061f71a70bd6582d995f6424fbbf4",
"lessThan": "b9c379e1d7e141b102f41858c9b8f6f36e7c89a4",
"versionType": "git"
},
{
"status": "affected",
"version": "fa96b57c149061f71a70bd6582d995f6424fbbf4",
"lessThan": "acadbd058fa12b510fbecca11eae22bd6f654250",
"versionType": "git"
},
{
"status": "affected",
"version": "fa96b57c149061f71a70bd6582d995f6424fbbf4",
"lessThan": "bb7a78e343468873bf00b2b181fcfd3c02d8cb56",
"versionType": "git"
}
],
"programFiles": [
"arch/loongarch/kernel/time.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "5.19"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "5.19",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "6.1.21",
"versionType": "semver",
"lessThanOrEqual": "6.1.*"
},
{
"status": "unaffected",
"version": "6.2.8",
"versionType": "semver",
"lessThanOrEqual": "6.2.*"
},
{
"status": "unaffected",
"version": "6.3",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"arch/loongarch/kernel/time.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2025-05-02T16:15:25.777",
"references": [
{
"url": "https://git.kernel.org/stable/c/acadbd058fa12b510fbecca11eae22bd6f654250",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/b9c379e1d7e141b102f41858c9b8f6f36e7c89a4",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/bb7a78e343468873bf00b2b181fcfd3c02d8cb56",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Analyzed",
"weaknesses": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"description": [
{
"lang": "en",
"value": "NVD-CWE-noinfo"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nLoongArch: Only call get_timer_irq() once in constant_clockevent_init()\n\nUnder CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_PREEMPT=y, we can see\nthe following messages on LoongArch, this is because using might_sleep()\nin preemption disable context.\n\n[ 0.001127] smp: Bringing up secondary CPUs ...\n[ 0.001222] Booting CPU#1...\n[ 0.001244] 64-bit Loongson Processor probed (LA464 Core)\n[ 0.001247] CPU1 revision is: 0014c012 (Loongson-64bit)\n[ 0.001250] FPU1 revision is: 00000000\n[ 0.001252] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283\n[ 0.001255] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1\n[ 0.001257] preempt_count: 1, expected: 0\n[ 0.001258] RCU nest depth: 0, expected: 0\n[ 0.001259] Preemption disabled at:\n[ 0.001261] [<9000000000223800>] arch_dup_task_struct+0x20/0x110\n[ 0.001272] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc7+ #43\n[ 0.001275] Hardware name: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V4.0.05132-beta10 12/13/202\n[ 0.001277] Stack : 0072617764726148 0000000000000000 9000000000222f1c 90000001001e0000\n[ 0.001286] 90000001001e3be0 90000001001e3be8 0000000000000000 0000000000000000\n[ 0.001292] 90000001001e3be8 0000000000000040 90000001001e3cb8 90000001001e3a50\n[ 0.001297] 9000000001642000 90000001001e3be8 be694d10ce4139dd 9000000100174500\n[ 0.001303] 0000000000000001 0000000000000001 00000000ffffe0a2 0000000000000020\n[ 0.001309] 000000000000002f 9000000001354116 00000000056b0000 ffffffffffffffff\n[ 0.001314] 0000000000000000 0000000000000000 90000000014f6e90 9000000001642000\n[ 0.001320] 900000000022b69c 0000000000000001 0000000000000000 9000000001736a90\n[ 0.001325] 9000000100038000 0000000000000000 9000000000222f34 0000000000000000\n[ 0.001331] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000\n[ 0.001337] ...\n[ 0.001339] Call Trace:\n[ 0.001342] [<9000000000222f34>] show_stack+0x5c/0x180\n[ 0.001346] [<90000000010bdd80>] dump_stack_lvl+0x60/0x88\n[ 0.001352] [<9000000000266418>] __might_resched+0x180/0x1cc\n[ 0.001356] [<90000000010c742c>] mutex_lock+0x20/0x64\n[ 0.001359] [<90000000002a8ccc>] irq_find_matching_fwspec+0x48/0x124\n[ 0.001364] [<90000000002259c4>] constant_clockevent_init+0x68/0x204\n[ 0.001368] [<900000000022acf4>] start_secondary+0x40/0xa8\n[ 0.001371] [<90000000010c0124>] smpboot_entry+0x60/0x64\n\nHere are the complete call chains:\n\nsmpboot_entry()\n start_secondary()\n constant_clockevent_init()\n get_timer_irq()\n irq_find_matching_fwnode()\n irq_find_matching_fwspec()\n mutex_lock()\n might_sleep()\n __might_sleep()\n __might_resched()\n\nIn order to avoid the above issue, we should break the call chains,\nusing timer_irq_installed variable as check condition to only call\nget_timer_irq() once in constant_clockevent_init() is a simple and\nproper way."
},
{
"lang": "es",
"value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: LoongArch: solo llamar a get_timer_irq() una vez en constant_clockevent_init() Bajo CONFIG_DEBUG_ATOMIC_SLEEP=y y CONFIG_DEBUG_PREEMPT=y, podemos ver los siguientes mensajes en LoongArch, esto se debe a que se usa might_sleep() en el contexto de deshabilitación de preempción. [ 0.001127] smp: Activando CPU secundarias... [ 0.001222] Arrancando CPU#1... [ 0.001244] Procesador Loongson de 64 bits probado (núcleo LA464) [ 0.001247] La revisión de CPU1 es: 0014c012 (Loongson-64bit) [ 0.001250] La revisión de FPU1 es: 00000000 [ 0.001252] ERROR: función de suspensión llamada desde un contexto no válido en kernel/locking/mutex.c:283 [ 0.001255] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 0.001257] preempt_count: 1, expected: 0 [ 0.001258] Profundidad de anidamiento de RCU: 0, esperado: 0 [ 0.001259] Preempción deshabilitada en: [ 0.001261] [<9000000000223800>] arch_dup_task_struct+0x20/0x110 [ 0.001272] CPU: 1 PID: 0 Comm: swapper/1 No contaminado 6.2.0-rc7+ #43 [ 0.001275] Nombre del hardware: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V4.0.05132-beta10 12/13/202 [ 0.001277] Pila: 0072617764726148 0000000000000000 9000000000222f1c 90000001001e0000 [ 0.001286] 90000001001e3be0 90000001001e3be8 0000000000000000 000000000000000 [ 0.001292] 90000001001e3be8 0000000000000040 90000001001e3cb8 90000001001e3a50 [ 0.001297] 9000000001642000 90000001001e3be8 be694d10ce4139dd 9000000100174500 [ 0.001303] 0000000000000001 000000000000001 000000000ffffe0a2 0000000000000020 [ 0.001309] 00000000000002f 9000000001354116 00000000056b0000 ffffffffffffffffff [ 0.001314] 0000000000000000 0000000000000000 90000000014f6e90 9000000001642000 [ 0.001320] 900000000022b69c 0000000000000001 000000000000000 9000000001736a90 [ 0.001325] 9000000100038000 000000000000000 9000000000222f34 000000000000000 [ 0.001331] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000 [ 0.001337] ... [ 0.001339] Rastreo de llamadas: [ 0.001342] [<9000000000222f34>] show_stack+0x5c/0x180 [ 0.001346] [<90000000010bdd80>] dump_stack_lvl+0x60/0x88 [ 0.001352] [<9000000000266418>] __might_resched+0x180/0x1cc [ 0.001356] [<90000000010c742c>] mutex_lock+0x20/0x64 [ 0.001359] [<90000000002a8ccc>] irq_find_matching_fwspec+0x48/0x124 [ 0.001364] [<90000000002259c4>] constant_clockevent_init+0x68/0x204 [ 0.001368] [<900000000022acf4>] start_secondary+0x40/0xa8 [ 0.001371] [<90000000010c0124>] smpboot_entry+0x60/0x64 Estas son las cadenas de llamadas completas: Para evitar el problema anterior, debemos romper las cadenas de llamadas, utilizando la variable timer_irq_installed como condición de verificación para llamar a get_timer_irq() solo una vez en constant_clockevent_init() es una forma simple y adecuada."
}
],
"lastModified": "2026-06-17T06:44:13.950",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "69B58F8F-017F-489C-B30F-1EB9F631577D",
"versionEndExcluding": "6.1.21",
"versionStartIncluding": "5.19"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "4011EC6B-7786-4709-B765-186FA31D6F7F",
"versionEndExcluding": "6.2.8",
"versionStartIncluding": "6.2"
}
],
"operator": "OR"
}
]
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}