« Volver al listado

CVE-2022-50704

Estado: AplazadaSin puntuar—

In the Linux kernel, the following vulnerability has been resolved:

USB: gadget: Fix use-after-free during usb config switch

In the process of switching USB config from rndis to other config, if the hardware does not support the ->pullup callback, or the hardware encounters a low probability fault, both of them may cause the ->pullup callback to fail, which will then cause a system panic (use after free).

The gadget drivers sometimes need to be unloaded regardless of the hardware's behavior.

Analysis as follows: ======================================================================= (1) write /config/usb_gadget/g1/UDC "none"

Leer descripción completaMostrar menos

(2) rm /config/usb_gadget/g1/configs/b.1/f1

(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4

If gadget->ops->pullup() return an error, function rndis_close() will be called, then it will causes a use-after-free problem. =======================================================================

Detalles técnicos trazas, registros y código del informe original
gether_disconnect+0x2c/0x1f8
rndis_disable+0x4c/0x74
composite_disconnect+0x74/0xb0
configfs_composite_disconnect+0x60/0x7c
usb_gadget_disconnect+0x70/0x124
usb_gadget_unregister_driver+0xc8/0x1d8
gadget_dev_desc_UDC_store+0xec/0x1e4

rndis_deregister+0x28/0x54
rndis_free+0x44/0x7c
usb_put_function+0x14/0x1c
config_usb_cfg_unlink+0xc4/0xe0
configfs_unlink+0x124/0x1c8
vfs_unlink+0x114/0x1dc

panic+0x1fc/0x3d0
do_page_fault+0xa8/0x46c
do_mem_abort+0x3c/0xac
el1_sync_handler+0x40/0x78
0xffffff801138f880
rndis_close+0x28/0x34
eth_stop+0x74/0x110
dev_close_many+0x48/0x194
rollback_registered_many+0x118/0x814
unregister_netdev+0x20/0x30
gether_cleanup+0x1c/0x38
rndis_attr_release+0xc/0x14
kref_put+0x74/0xb8
configfs_rmdir+0x314/0x374

CVSS

NVD no ha asignado puntuación CVSS a esta CVE (habitual desde el cambio de política de abril de 2026).

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2022-50704",
  "cveTags": [],
  "metrics": {},
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "0a55187a1ec8c03d0619e7ce41d10fdc39cff036",
              "lessThan": "30e926aa835ac2e6ad05822e4cb75833feb0d99f",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "0a55187a1ec8c03d0619e7ce41d10fdc39cff036",
              "lessThan": "99a58ac42d9b6911834b0224b6782aea0c311346",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "0a55187a1ec8c03d0619e7ce41d10fdc39cff036",
              "lessThan": "afdc12887f2b2ecf20d065a7d81ad29824155083",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/usb/gadget/udc/core.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.20"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "4.20",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.0.16",
              "versionType": "semver",
              "lessThanOrEqual": "6.0.*"
            },
            {
              "status": "unaffected",
              "version": "6.1.2",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.2",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/usb/gadget/udc/core.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2025-12-24T11:15:50.573",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/30e926aa835ac2e6ad05822e4cb75833feb0d99f",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/99a58ac42d9b6911834b0224b6782aea0c311346",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/afdc12887f2b2ecf20d065a7d81ad29824155083",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Deferred",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nUSB: gadget: Fix use-after-free during usb config switch\n\nIn the process of switching USB config from rndis to other config,\nif the hardware does not support the ->pullup callback, or the\nhardware encounters a low probability fault, both of them may cause\nthe ->pullup callback to fail, which will then cause a system panic\n(use after free).\n\nThe gadget drivers sometimes need to be unloaded regardless of the\nhardware's behavior.\n\nAnalysis as follows:\n=======================================================================\n(1) write /config/usb_gadget/g1/UDC \"none\"\n\ngether_disconnect+0x2c/0x1f8\nrndis_disable+0x4c/0x74\ncomposite_disconnect+0x74/0xb0\nconfigfs_composite_disconnect+0x60/0x7c\nusb_gadget_disconnect+0x70/0x124\nusb_gadget_unregister_driver+0xc8/0x1d8\ngadget_dev_desc_UDC_store+0xec/0x1e4\n\n(2) rm /config/usb_gadget/g1/configs/b.1/f1\n\nrndis_deregister+0x28/0x54\nrndis_free+0x44/0x7c\nusb_put_function+0x14/0x1c\nconfig_usb_cfg_unlink+0xc4/0xe0\nconfigfs_unlink+0x124/0x1c8\nvfs_unlink+0x114/0x1dc\n\n(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4\n\npanic+0x1fc/0x3d0\ndo_page_fault+0xa8/0x46c\ndo_mem_abort+0x3c/0xac\nel1_sync_handler+0x40/0x78\n0xffffff801138f880\nrndis_close+0x28/0x34\neth_stop+0x74/0x110\ndev_close_many+0x48/0x194\nrollback_registered_many+0x118/0x814\nunregister_netdev+0x20/0x30\ngether_cleanup+0x1c/0x38\nrndis_attr_release+0xc/0x14\nkref_put+0x74/0xb8\nconfigfs_rmdir+0x314/0x374\n\nIf gadget->ops->pullup() return an error, function rndis_close() will be\ncalled, then it will causes a use-after-free problem.\n======================================================================="
    }
  ],
  "lastModified": "2026-06-17T05:24:02.210",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}