« Volver al listado

CVE-2022-49533

Estado: ModificadaMedia (5.5)—

In the Linux kernel, the following vulnerability has been resolved:

ath11k: Change max no of active probe SSID and BSSID to fw capability

The maximum number of SSIDs in a for active probe requests is currently reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver. The scan_req_params structure only has the capacity to hold 10 SSIDs. This leads to a buffer overflow which can be triggered from wpa_supplicant in userspace. When copying the SSIDs into the scan_req_params structure in the ath11k_mac_op_hw_scan route, it can overwrite the extraie pointer.

Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe request will be sent, so totally 64 probe requests supported. So set both max ssid and bssid to 16 and 4 respectively. Remove the redundant macros of ssid and bssid.

Leer descripción completaMostrar menos

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

Tecnologías afectadas (1)

Linux — Linux Kernel

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2022-49533",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      },
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 5.5,
          "attackVector": "LOCAL",
          "baseSeverity": "MEDIUM",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
          "integrityImpact": "NONE",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 3.6,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "d5c65159f2895379e11ca13f62feabe93278985d",
              "lessThan": "210505788f1d243232e21ef660efcd4838890ce8",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "d5c65159f2895379e11ca13f62feabe93278985d",
              "lessThan": "ec5dfa1d66f2f71a48dab027d26a9fa78eb0f58f",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "d5c65159f2895379e11ca13f62feabe93278985d",
              "lessThan": "50dc9ce9f80554a88e33b73c30851acf2be36ed3",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/net/wireless/ath/ath11k/wmi.h"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.6"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "5.6",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "5.17.14",
              "versionType": "semver",
              "lessThanOrEqual": "5.17.*"
            },
            {
              "status": "unaffected",
              "version": "5.18.3",
              "versionType": "semver",
              "lessThanOrEqual": "5.18.*"
            },
            {
              "status": "unaffected",
              "version": "5.19",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/net/wireless/ath/ath11k/wmi.h"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2025-02-26T07:01:29.293",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/210505788f1d243232e21ef660efcd4838890ce8",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/50dc9ce9f80554a88e33b73c30851acf2be36ed3",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/ec5dfa1d66f2f71a48dab027d26a9fa78eb0f58f",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "NVD-CWE-noinfo"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nath11k: Change max no of active probe SSID and BSSID to fw capability\n\nThe maximum number of SSIDs in a for active probe requests is currently\nreported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver.\nThe scan_req_params structure only has the capacity to hold 10 SSIDs.\nThis leads to a buffer overflow which can be triggered from\nwpa_supplicant in userspace. When copying the SSIDs into the\nscan_req_params structure in the ath11k_mac_op_hw_scan route, it can\noverwrite the extraie pointer.\n\nFirmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe\nrequest will be sent, so totally 64 probe requests supported. So\nset both max ssid and bssid to 16 and 4 respectively. Remove the\nredundant macros of ssid and bssid.\n\nTested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1"
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ath11k: Cambiar el número máximo de SSID y BSSID de sonda activa a capacidad fw El número máximo de SSID en un para solicitudes de sonda activas se informa actualmente como 16 (WLAN_SCAN_PARAMS_MAX_SSID) al registrar el controlador. La estructura scan_req_params solo tiene la capacidad de contener 10 SSID. Esto conduce a un desbordamiento de búfer que puede activarse desde wpa_supplicant en el espacio de usuario. Al copiar los SSID en la estructura scan_req_params en la ruta ath11k_mac_op_hw_scan, puede sobrescribir el puntero extraie. El firmware admite 16 ssid * 4 bssid, para cada ssid se enviarán 4 solicitudes de sonda combinadas bssid, por lo que se admiten 64 solicitudes de sonda en total. Por lo tanto, configure tanto el ssid máximo como el bssid en 16 y 4 respectivamente. Elimine las macros redundantes de ssid y bssid. Probado en: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1"
    }
  ],
  "lastModified": "2026-08-04T10:17:50.480",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "019AEBB8-39FD-460E-B6DE-86065EDC7F7F",
              "versionEndExcluding": "5.17.14",
              "versionStartIncluding": "5.6"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "8E122216-2E9E-4B3E-B7B8-D575A45BA3C2",
              "versionEndExcluding": "5.18.3",
              "versionStartIncluding": "5.18"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}