« Volver al listado

CVE-2026-98189

Estado: RecibidaSin puntuar—

In the Linux kernel, the following vulnerability has been resolved:

wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()

wilc_wlan_handle_isr_ext() takes the RX transfer size from the device-reported interrupt status register (a 15-bit field shifted left by 2, up to 131068 bytes) and reads that many bytes from the device into rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap check only handles the current offset; the size itself is never compared against the buffer, so a bogus SDIO device can make the driver OOB-write rx_buffer by up to ~32K with data it controls.

Leer descripción completaMostrar menos

The oversized transfer also leaves rx_buffer_offset past the end of the buffer, after which the unsigned wrap check stops working and the overflow can repeat.

Drop any transfer whose size exceeds the RX buffer, acknowledging the data interrupt and re-arming the RX engine so the bogus frame is discarded and reception can continue. This also restores the rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check relies on.

This is not expected to change driver behavior in most cases: without this check, an oversized transfer would most likely corrupt neighboring kernel memory instead of completing anyway, and the drop path performs the same interrupt acknowledgment and RX engine re-arming as the normal path, so subsequent transfers are received unaffected.

Discovered by Atuin - Automated Vulnerability Discovery Engine.

CVSS

NVD no ha asignado puntuación CVSS a esta CVE (habitual desde el cambio de política de abril de 2026).

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Linux — Linux KernelAI

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-98189",
  "cveTags": [],
  "metrics": {},
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "3ddb88e237bc1e59fd37b1cf369f3b6c2dedae26",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "9f6a276ade936a8803f9f3df217c2368944dc321",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "aeb44a456d126d89863230eef0187e77e6441995",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "612ed9224eae70c53c0c88cb0990e0f9b709280a",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "304a5d72a04a3979a6434088c8d9c5172c2a908e",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "4f86fb6f9dce04f697da85806ad96a932fc2f079",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "14dcf4c3d74c878175b19d3da5986f83f26b1dd5",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "c5c77ba18ea66aa05441c71e38473efb787705a4",
              "lessThan": "c1ba7f7f18465e259cf1b4d9c73fc73853d7f790",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/net/wireless/microchip/wilc1000/wlan.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.2"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "4.2",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "5.10.271",
              "versionType": "semver",
              "lessThanOrEqual": "5.10.*"
            },
            {
              "status": "unaffected",
              "version": "5.15.222",
              "versionType": "semver",
              "lessThanOrEqual": "5.15.*"
            },
            {
              "status": "unaffected",
              "version": "6.1.189",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.158",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.112",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.54",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.2.8",
              "versionType": "semver",
              "lessThanOrEqual": "7.2.*"
            },
            {
              "status": "unaffected",
              "version": "7.3-rc4",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/net/wireless/microchip/wilc1000/wlan.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-10-06T09:18:04.033",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/14dcf4c3d74c878175b19d3da5986f83f26b1dd5",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/304a5d72a04a3979a6434088c8d9c5172c2a908e",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/3ddb88e237bc1e59fd37b1cf369f3b6c2dedae26",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/4f86fb6f9dce04f697da85806ad96a932fc2f079",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/612ed9224eae70c53c0c88cb0990e0f9b709280a",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/9f6a276ade936a8803f9f3df217c2368944dc321",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/aeb44a456d126d89863230eef0187e77e6441995",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c1ba7f7f18465e259cf1b4d9c73fc73853d7f790",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()\n\nwilc_wlan_handle_isr_ext() takes the RX transfer size from the\ndevice-reported interrupt status register (a 15-bit field shifted left by 2,\nup to 131068 bytes) and reads that many bytes from the device into\nrx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap\ncheck only handles the current offset; the size itself is never\ncompared against the buffer, so a bogus SDIO device can make the driver\nOOB-write rx_buffer by up to ~32K with data it controls.\n\nThe oversized transfer also leaves rx_buffer_offset past the end of\nthe buffer, after which the unsigned wrap check stops working and\nthe overflow can repeat.\n\nDrop any transfer whose size exceeds the RX buffer, acknowledging\nthe data interrupt and re-arming the RX engine so the bogus frame is\ndiscarded and reception can continue. This also restores the\nrx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check\nrelies on.\n\nThis is not expected to change driver behavior in most cases:\nwithout this check, an oversized transfer would most likely\ncorrupt neighboring kernel memory instead of completing anyway, and\nthe drop path performs the same interrupt acknowledgment and RX\nengine re-arming as the normal path, so subsequent transfers are\nreceived unaffected.\n\nDiscovered by Atuin - Automated Vulnerability Discovery Engine."
    }
  ],
  "lastModified": "2026-10-06T09:18:04.033",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}