« Volver al listado

CVE-2026-89775

Estado: RecibidaCrítica (9.3)—

In the Linux kernel, the following vulnerability has been resolved:

KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation

Computing the effects of a TLB invalidation involves looking at the size of the mapping cached by the TLB. For S1 mappings such as VNCR, this is deducted from the combination of the base granule size and the mapping level.

However, this implies that the S1 MMU is *on*. When the MMU is off, we indicate this with the level being set to a "creative" value of -127 (S1_MMU_DISABLED).

This ends-up being misinterpreted by pgshift_level_to_ttl() as it doesn't handle negative levels at all (the level is immediately cast to a u8 and only the bottom two bits considered), leading to an invalidation size of 0. Not helpful.

Leer descripción completaMostrar menos

Tidy-up pgshift_level_to_ttl() to handle these negative levels, and ttl_to_size() to always return SZ_1G when no valid TTL is present. This allows the removal of open-coded checks for similar situations.

Note that the check for a negative value not explicitely checking for S1_MMU_DISABLED is deliberate, so that actual negative levels introduced with LVA2 and D128 can take the same path if we ever support them.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad local en kernel Linux (AV:L, PR:N, UI:N) que afecta gestión de TLB en KVM arm64. Impacto crítico (C:H/I:H/A:H) permite escalada de privilegios; ejecución de código y DoS por corrupción de memoria.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-89775",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "CHANGED",
          "version": "3.1",
          "baseScore": 9.3,
          "attackVector": "LOCAL",
          "baseSeverity": "CRITICAL",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 6,
        "exploitabilityScore": 2.5
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "7270cc9157f474dfc46750a34c9d7defc686b2eb",
              "lessThan": "be54a70067c7dbe1381157e8a238fa4b16ea9c05",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "7270cc9157f474dfc46750a34c9d7defc686b2eb",
              "lessThan": "1c9fca34b9625a67a7f1a03c8604f3df760c6c49",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "7270cc9157f474dfc46750a34c9d7defc686b2eb",
              "lessThan": "8053393680d4fa3eb962667d2be95dd39f0940e5",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "arch/arm64/kvm/nested.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.16"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.16",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.18.51",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.2.5",
              "versionType": "semver",
              "lessThanOrEqual": "7.2.*"
            },
            {
              "status": "unaffected",
              "version": "7.3-rc1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "arch/arm64/kvm/nested.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-09-16T09:17:07.850",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/1c9fca34b9625a67a7f1a03c8604f3df760c6c49",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/8053393680d4fa3eb962667d2be95dd39f0940e5",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/be54a70067c7dbe1381157e8a238fa4b16ea9c05",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "http://www.openwall.com/lists/oss-security/2026/09/16/14",
      "source": "af854a3a-2127-422b-91ae-364da2661108"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nKVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation\n\nComputing the effects of a TLB invalidation involves looking at\nthe size of the mapping cached by the TLB. For S1 mappings such as\nVNCR, this is deducted from the combination of the base granule size\nand the mapping level.\n\nHowever, this implies that the S1 MMU is *on*. When the MMU is off,\nwe indicate this with the level being set to a \"creative\" value of\n-127 (S1_MMU_DISABLED).\n\nThis ends-up being misinterpreted by pgshift_level_to_ttl() as it\ndoesn't handle negative levels at all (the level is immediately cast\nto a u8 and only the bottom two bits considered), leading to an\ninvalidation size of 0. Not helpful.\n\nTidy-up pgshift_level_to_ttl() to handle these negative levels, and\nttl_to_size() to always return SZ_1G when no valid TTL is present.\nThis allows the removal of open-coded checks for similar situations.\n\nNote that the check for a negative value not explicitely checking for\nS1_MMU_DISABLED is deliberate, so that actual negative levels introduced\nwith LVA2 and D128 can take the same path if we ever support them."
    }
  ],
  "lastModified": "2026-09-16T18:17:19.027",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}