CVE-2026-80745
In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix VPOS/VNEG voltage selector table
The VPOSNEG_table[] mapping does not match the FP9931 datasheet.
The datasheet defines the VPOS/VNEG voltage mapping as:
However, VPOSNEG_table[] has two issues:
Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F).
Detalles técnicos trazas, registros y código del informe original
00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access.
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
- Puntuación base: 8.4
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.18%
- Percentil entre todas las CVEs puntuadas: 7
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
🎯 Técnicas ATT&CK
Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.
- Explotación
T1068Exploitation for Privilege Escalationprivilege escalation85 % - Impacto principal
T1499.004Application or System Exploitationimpact70 % - Impacto secundario
T1565.001Stored Data Manipulationimpact60 %
Vulnerabilidad local (AV:L, PR:N, UI:N) en controlador regulator del kernel que causa desbordamiento de buffer (acceso fuera de límites en tabla de 41 vs 64 entradas), permitiendo escalada de privilegios, denegación de servicio o corrupción de memoria de kernel.
Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.
🛡️ Mitigaciones ATT&CK que cubren estas técnicas
Tecnologías afectadas (1)
⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2026-80745",
"cveTags": [],
"metrics": {
"cvssMetricV31": [
{
"type": "Secondary",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 8.4,
"attackVector": "LOCAL",
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"integrityImpact": "HIGH",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "NONE",
"confidentialityImpact": "HIGH"
},
"impactScore": 5.9,
"exploitabilityScore": 2.5
}
]
},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "12d821bd13d42e6de3ecb1c13918b1f06a3ee213",
"lessThan": "92a9594053831bf4c5886519688e155912befaee",
"versionType": "git"
},
{
"status": "affected",
"version": "12d821bd13d42e6de3ecb1c13918b1f06a3ee213",
"lessThan": "66694b5f90f3876fccb87bbd02b453cdc33b3ae4",
"versionType": "git"
}
],
"programFiles": [
"drivers/regulator/fp9931.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "6.19"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "6.19",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "7.1.10",
"versionType": "semver",
"lessThanOrEqual": "7.1.*"
},
{
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"drivers/regulator/fp9931.c"
],
"defaultStatus": "affected"
}
]
}
],
"published": "2026-09-03T13:06:14.007",
"references": [
{
"url": "https://git.kernel.org/stable/c/66694b5f90f3876fccb87bbd02b453cdc33b3ae4",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/92a9594053831bf4c5886519688e155912befaee",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"vulnStatus": "Received",
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nregulator: fp9931: Fix VPOS/VNEG voltage selector table\n\nThe VPOSNEG_table[] mapping does not match the FP9931 datasheet.\n\nThe datasheet defines the VPOS/VNEG voltage mapping as:\n\n 00h-04h -> 7.04V (-7.04V)\n 05h -> 7.26V (-7.26V)\n 06h -> 7.49V (-7.49V)\n ...\n 28h-3Fh -> 15.06V (-15.06V)\n\nHowever, VPOSNEG_table[] has two issues:\n\n1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the\n table has 6 entries of 7.04V, causing all subsequent entries to be\n shifted by one position.\n\n2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but\n the table has only 41 entries. Any selector value above 0x28\n would result in an out-of-bounds table access.\n\nFix both issues by removing the duplicate 7.04V entry and appending\nthe missing 23 clamped 15.06V entries, bringing the table to the\ncorrect size of 64 entries (0x00~0x3F)."
}
],
"lastModified": "2026-09-04T05:17:14.570",
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}