« Volver al listado

CVE-2026-74702

Estado: RecibidaAlta (8.8)—

In the Linux kernel, the following vulnerability has been resolved:

vhost-scsi: reject feature changes after endpoint

vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later.

Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit.

Leer descripción completaMostrar menos

For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained():

sg_pool_index() then hits:

The kernel reported the following call trace and register state:

VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception.

Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward.

Detalles técnicos trazas, registros y código del informe original
  sg_alloc_table_chained(table, 129, first_chunk=NULL,
                         nents_first_chunk=inline_sg_cnt)

  BUG_ON(nents > SG_CHUNK_SIZE);   /* 129 > 128 */

  Call Trace:
   <TASK>
   ? __sg_alloc_table+0x1d8/0x250
   ? __pfx_vhost_run_work_list+0x10/0x10 [vhost]
   sg_alloc_table_chained+0x59/0xf0
   ? __pfx_sg_pool_alloc+0x10/0x10
   ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi]
   vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi]
   ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi]
   vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi]
   vhost_run_work_list+0x8e/0xd0 [vhost]
   vhost_task_fn+0xe1/0x210
   ret_from_fork+0x348/0x540
   </TASK>

  RIP: 0010:0x4
  CR2 = 0x4
  RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202
  RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad local (AV:L/PR:L) que causa BUG_ON() y null pointer dereference al cambiar features después de endpoint setup, permitiendo DoS por crash del kernel o corrupción de datos en vhost-scsi.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-74702",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "CHANGED",
          "version": "3.1",
          "baseScore": 8.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 6,
        "exploitabilityScore": 2
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "bf2d650391be508dd8b5e188b65ed32300cf3489",
              "lessThan": "a06e4611d45518896fbff4f45d9581578b107e91",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "bf2d650391be508dd8b5e188b65ed32300cf3489",
              "lessThan": "9a3eb77a612f9d158e4d27df43677a014e9cfa55",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "bf2d650391be508dd8b5e188b65ed32300cf3489",
              "lessThan": "42bc45df5905e2b7dccb72adaf7730f66cfbe03f",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/vhost/scsi.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.15"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.15",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.18.45",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.1.9",
              "versionType": "semver",
              "lessThanOrEqual": "7.1.*"
            },
            {
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/vhost/scsi.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-08-22T16:16:44.873",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/42bc45df5905e2b7dccb72adaf7730f66cfbe03f",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/9a3eb77a612f9d158e4d27df43677a014e9cfa55",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/a06e4611d45518896fbff4f45d9581578b107e91",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nvhost-scsi: reject feature changes after endpoint\n\nvhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates\neach command's protection scatterlist array (prot_sgl) according to the\nacknowledged VIRTIO_SCSI_F_T10_PI bit.  The command pools are not rebuilt\nwhen VHOST_SET_FEATURES changes that bit later.\n\nAlthough virtio feature bits must not change after feature negotiation,\nvhost_scsi_set_features() currently accepts such a request after the\nendpoint is active and updates acked_features.  Enabling T10-PI after\nendpoint setup therefore leaves prot_sgl NULL while the I/O path follows\nthe new feature bit.\n\nFor a 129-page protection payload, vhost_scsi_mapal() passes the missing\nfirst chunk to sg_alloc_table_chained():\n\n  sg_alloc_table_chained(table, 129, first_chunk=NULL,\n                         nents_first_chunk=inline_sg_cnt)\n\nsg_pool_index() then hits:\n\n  BUG_ON(nents > SG_CHUNK_SIZE);   /* 129 > 128 */\n\nThe kernel reported the following call trace and register state:\n\n  Call Trace:\n   <TASK>\n   ? __sg_alloc_table+0x1d8/0x250\n   ? __pfx_vhost_run_work_list+0x10/0x10 [vhost]\n   sg_alloc_table_chained+0x59/0xf0\n   ? __pfx_sg_pool_alloc+0x10/0x10\n   ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi]\n   vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi]\n   ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi]\n   vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi]\n   vhost_run_work_list+0x8e/0xd0 [vhost]\n   vhost_task_fn+0xe1/0x210\n   ret_from_fork+0x348/0x540\n   </TASK>\n\n  RIP: 0010:0x4\n  CR2 = 0x4\n  RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202\n  RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000\n  RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081\n\nVHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only\nexception.\n\nReject changes to any feature other than VHOST_F_LOG_ALL while the\nendpoint is active.  This preserves the existing runtime log toggle while\npreventing feature-dependent command resources and data-path state from\nbecoming inconsistent.  Userspace must clear the endpoint before changing\nany other negotiated feature and set the endpoint up again afterward."
    }
  ],
  "lastModified": "2026-08-25T06:18:54.117",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}