« Volver al listado

CVE-2026-68425

Estado: RecibidaAlta (7.1)—

In the Linux kernel, the following vulnerability has been resolved:

IB/mad: Drop unmatched RMPP responses before reassembly

Kernel-handled RMPP receive processing starts reassembly for active DATA responses before the response is matched to an outstanding send. The normal match happens later, after ib_process_rmpp_recv_wc() has either assembled a complete message or consumed the segment.

That ordering lets an unsolicited response that routes to a kernel RMPP agent by the high TID bits allocate or extend RMPP receive state before the full TID and source address are checked against a real request. A reordered burst can therefore reach the receive-side insertion path even though the response would not match any send.

Leer descripción completaMostrar menos

For kernel-handled RMPP DATA responses, require the existing ib_find_send_mad() match before entering RMPP reassembly. The matcher already checks the full TID, management class and source address/GID against the agent wait, backlog and in-flight send lists. If there is no match, drop the response without creating RMPP state.

This leaves the RMPP window behavior unchanged and only rejects responses that have no corresponding request.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Inferido por reglas deterministas a partir del vector CVSS y la CWE. Solo orientativo.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Vulnerability ScanningThreat Intelligence ProgramPrivileged Account ManagementNetwork SegmentationDisable or Remove Feature or ProgramApplication Isolation and Sandboxing

Tecnologías afectadas (1)

⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.

Linux — Linux KernelAI

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-68425",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.1,
          "attackVector": "ADJACENT_NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H",
          "integrityImpact": "LOW",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "confidentialityImpact": "NONE"
        },
        "impactScore": 4.2,
        "exploitabilityScore": 2.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "45416c87ebcece1e90f3bc5bc172d106b77c6b69",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "9634fb1f4d404f36a20ffbcb8797369db69b06bb",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "bfb9e8243fd2099d1080d09222964d988f991d9b",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "dfa535c94406c03d3f0c869ef3ba5528e395737c",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "6e1bd7f590b0ccfee07f7fe1d48b92059bd37d72",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "98d2d468b4faa1fdc68c0c6c238389906ee3490c",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "ad9c9ad3204f63a46f0f7de29687a8e512f05e29",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "fa619a77046bef30478697aba0553991033afb8e",
              "lessThan": "d2e52d610b9b09694261632340b801a421e0b0c5",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/infiniband/core/mad.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "2.6.13"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "2.6.13",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "5.10.265",
              "versionType": "semver",
              "lessThanOrEqual": "5.10.*"
            },
            {
              "status": "unaffected",
              "version": "5.15.216",
              "versionType": "semver",
              "lessThanOrEqual": "5.15.*"
            },
            {
              "status": "unaffected",
              "version": "6.1.183",
              "versionType": "semver",
              "lessThanOrEqual": "6.1.*"
            },
            {
              "status": "unaffected",
              "version": "6.6.148",
              "versionType": "semver",
              "lessThanOrEqual": "6.6.*"
            },
            {
              "status": "unaffected",
              "version": "6.12.101",
              "versionType": "semver",
              "lessThanOrEqual": "6.12.*"
            },
            {
              "status": "unaffected",
              "version": "6.18.42",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.1.6",
              "versionType": "semver",
              "lessThanOrEqual": "7.1.*"
            },
            {
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/infiniband/core/mad.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-08-10T13:20:36.413",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/45416c87ebcece1e90f3bc5bc172d106b77c6b69",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/6e1bd7f590b0ccfee07f7fe1d48b92059bd37d72",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/9634fb1f4d404f36a20ffbcb8797369db69b06bb",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/98d2d468b4faa1fdc68c0c6c238389906ee3490c",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/ad9c9ad3204f63a46f0f7de29687a8e512f05e29",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/bfb9e8243fd2099d1080d09222964d988f991d9b",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/d2e52d610b9b09694261632340b801a421e0b0c5",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/dfa535c94406c03d3f0c869ef3ba5528e395737c",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Received",
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nIB/mad: Drop unmatched RMPP responses before reassembly\n\nKernel-handled RMPP receive processing starts reassembly for active\nDATA responses before the response is matched to an outstanding send.\nThe normal match happens later, after ib_process_rmpp_recv_wc() has\neither assembled a complete message or consumed the segment.\n\nThat ordering lets an unsolicited response that routes to a kernel\nRMPP agent by the high TID bits allocate or extend RMPP receive state\nbefore the full TID and source address are checked against a real\nrequest. A reordered burst can therefore reach the receive-side\ninsertion path even though the response would not match any send.\n\nFor kernel-handled RMPP DATA responses, require the existing\nib_find_send_mad() match before entering RMPP reassembly. The matcher\nalready checks the full TID, management class and source address/GID\nagainst the agent wait, backlog and in-flight send lists. If there is\nno match, drop the response without creating RMPP state.\n\nThis leaves the RMPP window behavior unchanged and only rejects\nresponses that have no corresponding request."
    }
  ],
  "lastModified": "2026-08-19T17:20:49.477",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}