CVE-2026-46081

Estado: En análisisAlta (7.8)—

In the Linux kernel, the following vulnerability has been resolved:

crypto: acomp - fix wrong pointer stored by acomp_save_req()

acomp_save_req() stores &req->chain in req->base.data. When acomp_reqchain_done() is invoked on asynchronous completion, it receives &req->chain as the data argument but casts it directly to struct acomp_req. Since data points to the chain member, all subsequent field accesses are at a wrong offset, resulting in memory corruption.

The issue occurs when an asynchronous hardware implementation, such as the QAT driver, completes a request that uses the DMA virtual address interface (e.g. acomp_request_set_src_dma()).

Leer descripción completaMostrar menos

This combination causes crypto_acomp_compress() to enter the acomp_do_req_chain() path, which sets acomp_reqchain_done() as the completion callback via acomp_save_req().

With KASAN enabled, this manifests as a general protection fault in acomp_reqchain_done():

Fix this by storing the request itself in req->base.data instead of &req->chain, so that acomp_reqchain_done() receives the correct pointer. Simplify acomp_restore_req() accordingly to access req->chain directly.

Detalles técnicos trazas, registros y código del informe original

  general protection fault, probably for non-canonical address 0xe000040000000000
  KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007]
  RIP: 0010:acomp_reqchain_done+0x15b/0x4e0
  Call Trace:
   <IRQ>
   qat_comp_alg_callback+0x5d/0xa0 [intel_qat]
   adf_ring_response_handler+0x376/0x8b0 [intel_qat]
   adf_response_handler+0x60/0x170 [intel_qat]
   tasklet_action_common+0x223/0x820
   handle_softirqs+0x1ab/0x640
   </IRQ>

CVSS

Versión: 3.1
Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Puntuación base: 7.8

Probabilidad de explotación (EPSS)

Probabilidad de explotación en los próximos 30 días: 0.17%
Percentil entre todas las CVEs puntuadas: 6
Fecha de la puntuación: 6/10/2026

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

ExplotaciónT1068 Exploitation for Privilege Escalationprivilege escalation75 %
Impacto principalT1565.001 Stored Data Manipulationimpact70 %
Impacto secundarioT1499.004 Application or System Exploitationimpact65 %

Acceso local (AV:L) sin interacción (UI:N) permite escalada de privilegios. La corrupción de memoria en kernel puede lograr ejecución remota o DoS. CVSS indica impacto alto en confidencialidad, integridad y disponibilidad.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Threat Intelligence Program Restrict File and Directory Permissions Remote Data Storage Filter Network Traffic Execution Prevention Encrypt Sensitive Information

Tecnologías afectadas (1)

Linux — Linux Kernel

CWE

CWE-787

Referencias

JSON original (NVD)

Mostrar

{
  "id": "CVE-2026-46081",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Secondary",
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "64929fe8c0a43508eee952cf57903a61c52601e7",
              "lessThan": "343a5bf68a8ff9affcf2b70677ea4cf40c195ee4",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "64929fe8c0a43508eee952cf57903a61c52601e7",
              "lessThan": "1a2785e5985627f2265ba7775949601a29ba0d1e",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "64929fe8c0a43508eee952cf57903a61c52601e7",
              "lessThan": "d7e20b9bd6c990773cf0c09e2642250b8a70263d",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "crypto/acompress.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.16"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.16",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.18.27",
              "versionType": "semver",
              "lessThanOrEqual": "6.18.*"
            },
            {
              "status": "unaffected",
              "version": "7.0.4",
              "versionType": "semver",
              "lessThanOrEqual": "7.0.*"
            },
            {
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "crypto/acompress.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-05-27T14:17:29.510",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/1a2785e5985627f2265ba7775949601a29ba0d1e",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/343a5bf68a8ff9affcf2b70677ea4cf40c195ee4",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/d7e20b9bd6c990773cf0c09e2642250b8a70263d",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Undergoing Analysis",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-787"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncrypto: acomp - fix wrong pointer stored by acomp_save_req()\n\nacomp_save_req() stores &req->chain in req->base.data. When\nacomp_reqchain_done() is invoked on asynchronous completion, it receives\n&req->chain as the data argument but casts it directly to struct\nacomp_req. Since data points to the chain member, all subsequent field\naccesses are at a wrong offset, resulting in memory corruption.\n\nThe issue occurs when an asynchronous hardware implementation, such as\nthe QAT driver, completes a request that uses the DMA virtual address\ninterface (e.g. acomp_request_set_src_dma()). This combination causes\ncrypto_acomp_compress() to enter the acomp_do_req_chain() path, which\nsets acomp_reqchain_done() as the completion callback via\nacomp_save_req().\n\nWith KASAN enabled, this manifests as a general protection fault in\nacomp_reqchain_done():\n\n  general protection fault, probably for non-canonical address 0xe000040000000000\n  KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007]\n  RIP: 0010:acomp_reqchain_done+0x15b/0x4e0\n  Call Trace:\n   <IRQ>\n   qat_comp_alg_callback+0x5d/0xa0 [intel_qat]\n   adf_ring_response_handler+0x376/0x8b0 [intel_qat]\n   adf_response_handler+0x60/0x170 [intel_qat]\n   tasklet_action_common+0x223/0x820\n   handle_softirqs+0x1ab/0x640\n   </IRQ>\n\nFix this by storing the request itself in req->base.data instead of\n&req->chain, so that acomp_reqchain_done() receives the correct pointer.\nSimplify acomp_restore_req() accordingly to access req->chain directly."
    }
  ],
  "lastModified": "2026-06-24T17:20:20.110",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "24BD5AA7-843C-41A3-8471-F53AD6DB7C6B",
              "versionEndExcluding": "6.18.27",
              "versionStartIncluding": "6.16"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "CDB78D6D-22C3-4154-B0D0-94AF1CE5C2E3",
              "versionEndExcluding": "7.0.4",
              "versionStartIncluding": "6.19"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}