« Volver al listado

CVE-2026-31764

Estado: AnalizadaAlta (7.8)—

In the Linux kernel, the following vulnerability has been resolved:

iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only

The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access.

The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency.

Leer descripción completaMostrar menos

Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

🎯 Técnicas ATT&CK

Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.

Vulnerabilidad local (AV:L, PR:L) que causa acceso fuera de límites en tabla kernel, permitiendo DoS o corrupción de memoria en sensor imu st_lsm6dsx.

Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.

🛡️ Mitigaciones ATT&CK que cubren estas técnicas

Tecnologías afectadas (1)

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2026-31764",
  "cveTags": [],
  "metrics": {
    "cvssMetricV31": [
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.1",
          "baseScore": 7.8,
          "attackVector": "LOCAL",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "NONE",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 1.8
      }
    ]
  },
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
              "lessThan": "3225a81e8d264442b14c7c1bc965ebafa3c0ee01",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
              "lessThan": "679c04c10d65d32a3f269e696b22912ff0a001b9",
              "versionType": "git"
            }
          ],
          "programFiles": [
            "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
          ],
          "defaultStatus": "unaffected"
        },
        {
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "product": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.19"
            },
            {
              "status": "unaffected",
              "version": "0",
              "lessThan": "6.19",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "6.19.12",
              "versionType": "semver",
              "lessThanOrEqual": "6.19.*"
            },
            {
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix",
              "lessThanOrEqual": "*"
            }
          ],
          "programFiles": [
            "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
          ],
          "defaultStatus": "affected"
        }
      ]
    }
  ],
  "published": "2026-05-01T15:16:39.523",
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/3225a81e8d264442b14c7c1bc965ebafa3c0ee01",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/679c04c10d65d32a3f269e696b22912ff0a001b9",
      "tags": [
        "Patch"
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-129"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\niio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only\n\nThe st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace\nwrites the buffer sampling frequency sysfs attribute, calls\nst_lsm6dsx_check_odr(), which accesses the odr_table array at index\n`sensor->id`; since this array is only 2 entries long, an access for any\nsensor type other than accelerometer or gyroscope is an out-of-bounds\naccess.\n\nThe motivation for being able to set a buffer frequency different from the\nsensor sampling frequency is to support use cases that need accurate event\ndetection (which requires a high sampling frequency) while retrieving\nsensor data at low frequency. Since all the supported event types are\ngenerated from acceleration data only, do not create the buffer sampling\nfrequency attribute for sensor types other than the accelerometer."
    }
  ],
  "lastModified": "2026-06-17T10:34:25.233",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "0A2B9540-02D5-41B4-B16A-82AF66FD4F36",
              "versionEndExcluding": "6.19.12",
              "versionStartIncluding": "6.19"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258"
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "1D2315C0-D46F-4F85-9754-F9E5E11374A6"
            }
          ],
          "operator": "OR"
        }
      ]
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}