CVE-2026-101087
Nezha versions 2.0.10 through 2.3.2 use a restricted HTTP client to validate user-configurable notification and DDNS webhook URLs, but the denylist did not cover IPv6 transition ranges — specifically the 6to4 prefix 2002::/16 and the local-use IPv4/IPv6 translation prefix 64:ff9b:1::/48. Because such addresses satisfy Go's netip.Addr.IsGlobalUnicast check, the URL validator accepted them.
Leer descripción completaMostrar menos
An authenticated user able to configure a webhook may be able to cause the dashboard to issue requests to an otherwise restricted IPv6 endpoint, but only where the dashboard's network provides unusual or non-standards-compliant routing for these transition ranges; no direct path to an IPv4 metadata, loopback, or private-network HTTP request has been demonstrated. The issue is fixed in version 2.3.3 (commit d1fcde8e), which blocks both prefixes.
CVSS
- Versión: 4.0
- Vector: CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:N/VI:L/VA:N/SC:L/SI:L/SA:L/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X
- Puntuación base: 5.3
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.26%
- Percentil entre todas las CVEs puntuadas: 16
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
🎯 Técnicas ATT&CK
Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.
- Explotación
T1210Exploitation of Remote Serviceslateral movement75 % - Impacto principal
T1090.001Internal Proxycommand and control70 % - Impacto secundario
T1583.006Web Servicesresource development45 %
CVE-2026-101087: bypass de denylist en validador de URLs webhook permite a usuario autenticado hacer que dashboard emita solicitudes a endpoints IPv6 restringidos (6to4, 64:ff9b:1::/48); requiere acceso autenticado (PR:L) y capacidad de configuración; manifestación de SSRF via servicios remotos con
Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.
🛡️ Mitigaciones ATT&CK que cubren estas técnicas
Tecnologías afectadas (1)
⚠ Inferidas por IA a partir de la descripción — NVD aún no ha analizado esta CVE; no son CPE verificados.
CWE
- CWE-918
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2026-101087",
"cveTags": [],
"metrics": {
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-101087",
"role": "CISA Coordinator",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"version": "2.0.3",
"timestamp": "2026-09-30T14:12:20.579702Z"
}
}
],
"cvssMetricV31": [
{
"type": "Secondary",
"source": "disclosure@vulncheck.com",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 4.3,
"attackVector": "NETWORK",
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N",
"integrityImpact": "LOW",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "NONE",
"privilegesRequired": "LOW",
"confidentialityImpact": "NONE"
},
"impactScore": 1.4,
"exploitabilityScore": 2.8
}
],
"cvssMetricV40": [
{
"type": "Secondary",
"source": "disclosure@vulncheck.com",
"cvssData": {
"Safety": "NOT_DEFINED",
"version": "4.0",
"Recovery": "NOT_DEFINED",
"baseScore": 5.3,
"Automatable": "NOT_DEFINED",
"attackVector": "NETWORK",
"baseSeverity": "MEDIUM",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:N/VI:L/VA:N/SC:L/SI:L/SA:L/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X",
"exploitMaturity": "NOT_DEFINED",
"providerUrgency": "NOT_DEFINED",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"attackRequirements": "NONE",
"privilegesRequired": "LOW",
"subIntegrityImpact": "LOW",
"vulnIntegrityImpact": "LOW",
"integrityRequirement": "NOT_DEFINED",
"modifiedAttackVector": "NOT_DEFINED",
"subAvailabilityImpact": "LOW",
"vulnAvailabilityImpact": "NONE",
"availabilityRequirement": "NOT_DEFINED",
"modifiedUserInteraction": "NOT_DEFINED",
"modifiedAttackComplexity": "NOT_DEFINED",
"subConfidentialityImpact": "LOW",
"vulnConfidentialityImpact": "NONE",
"confidentialityRequirement": "NOT_DEFINED",
"modifiedAttackRequirements": "NOT_DEFINED",
"modifiedPrivilegesRequired": "NOT_DEFINED",
"modifiedSubIntegrityImpact": "NOT_DEFINED",
"modifiedVulnIntegrityImpact": "NOT_DEFINED",
"vulnerabilityResponseEffort": "NOT_DEFINED",
"modifiedSubAvailabilityImpact": "NOT_DEFINED",
"modifiedVulnAvailabilityImpact": "NOT_DEFINED",
"modifiedSubConfidentialityImpact": "NOT_DEFINED",
"modifiedVulnConfidentialityImpact": "NOT_DEFINED"
}
}
]
},
"affected": [
{
"source": "disclosure@vulncheck.com",
"affectedData": [
{
"vendor": "nezhahq",
"product": "nezha",
"versions": [
{
"status": "affected",
"version": "2.0.10",
"lessThan": "2.3.3",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "2.3.3",
"versionType": "semver"
}
],
"packageURL": "pkg:golang/github.com/nezhahq/nezha",
"defaultStatus": "unaffected"
}
]
}
],
"published": "2026-09-27T21:17:02.587",
"references": [
{
"url": "https://github.com/nezhahq/nezha/commit/d1fcde8e",
"source": "disclosure@vulncheck.com"
},
{
"url": "https://github.com/nezhahq/nezha/security/advisories/GHSA-jr2j-7hvh-h4q9",
"source": "disclosure@vulncheck.com"
},
{
"url": "https://www.vulncheck.com/advisories/nezha-2.0.10-through-2.3.2-ssrf-denylist-bypass-ipv6",
"source": "disclosure@vulncheck.com"
}
],
"vulnStatus": "Deferred",
"weaknesses": [
{
"type": "Secondary",
"source": "disclosure@vulncheck.com",
"description": [
{
"lang": "en",
"value": "CWE-918"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Nezha versions 2.0.10 through 2.3.2 use a restricted HTTP client to validate user-configurable notification and DDNS webhook URLs, but the denylist did not cover IPv6 transition ranges — specifically the 6to4 prefix 2002::/16 and the local-use IPv4/IPv6 translation prefix 64:ff9b:1::/48. Because such addresses satisfy Go's netip.Addr.IsGlobalUnicast check, the URL validator accepted them. An authenticated user able to configure a webhook may be able to cause the dashboard to issue requests to an otherwise restricted IPv6 endpoint, but only where the dashboard's network provides unusual or non-standards-compliant routing for these transition ranges; no direct path to an IPv4 metadata, loopback, or private-network HTTP request has been demonstrated. The issue is fixed in version 2.3.3 (commit d1fcde8e), which blocks both prefixes."
}
],
"lastModified": "2026-09-30T15:22:18.827",
"sourceIdentifier": "disclosure@vulncheck.com"
}