CVE-2025-39719
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: bno055: fix OOB access of hw_xlate array
Fix a potential out-of-bounds array access of the hw_xlate array in bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the vals array instead of the length of the hw_xlate array. In the case of bno055_gyr_scale, the vals array is larger than the hw_xlate array, so this could result in an out-of-bounds access. In practice, this shouldn't happen though because a match should always be found which breaks out of the for loop before it iterates beyond the end of the hw_xlate array.
Leer descripción completaMostrar menos
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be sure we are iterating over the correct length.
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
- Puntuación base: 7.1
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.15%
- Percentil entre todas las CVEs puntuadas: 4
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
🎯 Técnicas ATT&CK
Cómo se explota esta vulnerabilidad y qué consigue el atacante, en el lenguaje de MITRE ATT&CK.
- Explotación
T1068Exploitation for Privilege Escalationprivilege escalation75 % - Impacto principal
T1499Endpoint Denial of Serviceimpact65 %
Acceso local (AV:L) sin interacción del usuario permite escalada mediante Out-of-Bounds (CWE-125) en driver IMU del kernel; potencial DoS por corrupción de memoria o ejecución.
Inferido por nuestro agente de análisis a partir de la descripción oficial, el vector CVSS y la CWE, y comprobado por un supervisor. Puede contener errores.
🛡️ Mitigaciones ATT&CK que cubren estas técnicas
Tecnologías afectadas (2)
CWE
- CWE-125
Referencias
- https://git.kernel.org/stable/c/399b883ec828e436f1a721bf8551b4da8727e65b
- https://git.kernel.org/stable/c/4808ca3aa30ae857454d0b41d2d0bf161a312b45
- https://git.kernel.org/stable/c/50e823a23816b792daf6e8405f8d6045952bb90e
- https://git.kernel.org/stable/c/5c2b601922c064f7be70ae8621277f18d1ffec59
- https://git.kernel.org/stable/c/a0691ab6334f1769acc64ea9e319414a682ff45d
- https://lists.debian.org/debian-lts-announce/2025/10/msg00008.html
- https://cert-portal.siemens.com/productcert/html/ssa-032379.html
JSON original (NVD)
Mostrar
{
"id": "CVE-2025-39719",
"cveTags": [],
"metrics": {
"cvssMetricV31": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 7.1,
"attackVector": "LOCAL",
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
"integrityImpact": "NONE",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "LOW",
"confidentialityImpact": "HIGH"
},
"impactScore": 5.2,
"exploitabilityScore": 1.8
}
]
},
"affected": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"affectedData": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "4aefe1c2bd0cb0223130671d459cd16efa3d3462",
"lessThan": "a0691ab6334f1769acc64ea9e319414a682ff45d",
"versionType": "git"
},
{
"status": "affected",
"version": "4aefe1c2bd0cb0223130671d459cd16efa3d3462",
"lessThan": "50e823a23816b792daf6e8405f8d6045952bb90e",
"versionType": "git"
},
{
"status": "affected",
"version": "4aefe1c2bd0cb0223130671d459cd16efa3d3462",
"lessThan": "4808ca3aa30ae857454d0b41d2d0bf161a312b45",
"versionType": "git"
},
{
"status": "affected",
"version": "4aefe1c2bd0cb0223130671d459cd16efa3d3462",
"lessThan": "5c2b601922c064f7be70ae8621277f18d1ffec59",
"versionType": "git"
},
{
"status": "affected",
"version": "4aefe1c2bd0cb0223130671d459cd16efa3d3462",
"lessThan": "399b883ec828e436f1a721bf8551b4da8727e65b",
"versionType": "git"
}
],
"programFiles": [
"drivers/iio/imu/bno055/bno055.c"
],
"defaultStatus": "unaffected"
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"product": "Linux",
"versions": [
{
"status": "affected",
"version": "6.1"
},
{
"status": "unaffected",
"version": "0",
"lessThan": "6.1",
"versionType": "semver"
},
{
"status": "unaffected",
"version": "6.1.149",
"versionType": "semver",
"lessThanOrEqual": "6.1.*"
},
{
"status": "unaffected",
"version": "6.6.103",
"versionType": "semver",
"lessThanOrEqual": "6.6.*"
},
{
"status": "unaffected",
"version": "6.12.44",
"versionType": "semver",
"lessThanOrEqual": "6.12.*"
},
{
"status": "unaffected",
"version": "6.16.4",
"versionType": "semver",
"lessThanOrEqual": "6.16.*"
},
{
"status": "unaffected",
"version": "6.17",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}
],
"programFiles": [
"drivers/iio/imu/bno055/bno055.c"
],
"defaultStatus": "affected"
}
]
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"affectedData": [
{
"vendor": "Siemens",
"product": "SIMATIC CN 4100",
"versions": [
{
"status": "affected",
"version": "0",
"lessThan": "V5.0",
"versionType": "custom"
}
],
"defaultStatus": "unknown"
}
]
}
],
"published": "2025-09-05T18:15:49.513",
"references": [
{
"url": "https://git.kernel.org/stable/c/399b883ec828e436f1a721bf8551b4da8727e65b",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/4808ca3aa30ae857454d0b41d2d0bf161a312b45",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/50e823a23816b792daf6e8405f8d6045952bb90e",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/5c2b601922c064f7be70ae8621277f18d1ffec59",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/a0691ab6334f1769acc64ea9e319414a682ff45d",
"tags": [
"Patch"
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2025/10/msg00008.html",
"tags": [
"Third Party Advisory"
],
"source": "af854a3a-2127-422b-91ae-364da2661108"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-032379.html",
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"vulnStatus": "Modified",
"weaknesses": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"description": [
{
"lang": "en",
"value": "CWE-125"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\niio: imu: bno055: fix OOB access of hw_xlate array\n\nFix a potential out-of-bounds array access of the hw_xlate array in\nbno055.c.\n\nIn bno055_get_regmask(), hw_xlate was iterated over the length of the\nvals array instead of the length of the hw_xlate array. In the case of\nbno055_gyr_scale, the vals array is larger than the hw_xlate array,\nso this could result in an out-of-bounds access. In practice, this\nshouldn't happen though because a match should always be found which\nbreaks out of the for loop before it iterates beyond the end of the\nhw_xlate array.\n\nBy adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be\nsure we are iterating over the correct length."
}
],
"lastModified": "2026-06-17T09:18:20.590",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "0C9B5F1A-9644-4E1A-B1E8-A0A2EE50EFC1",
"versionEndExcluding": "6.1.149",
"versionStartIncluding": "6.1"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "F2293654-7169-49B5-8D0D-EE51EF8B8E48",
"versionEndExcluding": "6.6.103",
"versionStartIncluding": "6.2"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "12351F24-1133-4775-960C-F2B47E81298B",
"versionEndExcluding": "6.12.44",
"versionStartIncluding": "6.7"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "AFC28995-B8C3-4B68-8CB6-78E792B6629D",
"versionEndExcluding": "6.16.4",
"versionStartIncluding": "6.13"
}
],
"operator": "OR"
}
]
},
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:debian:debian_linux:11.0:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "FA6FEEC2-9F11-4643-8827-749718254FED"
}
],
"operator": "OR"
}
]
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}