CVE-2023-28436
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules.
Leer descripción completaMostrar menos
Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used.
Affected users should upgrade to version 1.38.2 to remediate the issue.
CVSS
- Versión: 3.1
- Vector: CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
- Puntuación base: 8
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.46%
- Percentil entre todas las CVEs puntuadas: 38
- Fecha de la puntuación: 6/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (1)
CWE
- CWE-269
Referencias
- https://github.com/tailscale/tailscale/commit/d00c046b723dff6e3775d7d35f891403ac21a47d
- https://github.com/tailscale/tailscale/releases/tag/v1.38.2
- https://github.com/tailscale/tailscale/security/advisories/GHSA-vfgq-g5x8-g595
- https://tailscale.com/security-bulletins/#ts-2023-003
- https://github.com/tailscale/tailscale/commit/d00c046b723dff6e3775d7d35f891403ac21a47d
- https://github.com/tailscale/tailscale/releases/tag/v1.38.2
- https://github.com/tailscale/tailscale/security/advisories/GHSA-vfgq-g5x8-g595
- https://tailscale.com/security-bulletins/#ts-2023-003
JSON original (NVD)
Mostrar
{
"id": "CVE-2023-28436",
"cveTags": [],
"metrics": {
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2023-28436",
"role": "CISA Coordinator",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"version": "2.0.3",
"timestamp": "2025-02-25T14:28:14.011420Z"
}
}
],
"cvssMetricV31": [
{
"type": "Secondary",
"source": "security-advisories@github.com",
"cvssData": {
"scope": "CHANGED",
"version": "3.1",
"baseScore": 5.7,
"attackVector": "ADJACENT_NETWORK",
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:H/UI:R/S:C/C:H/I:N/A:N",
"integrityImpact": "NONE",
"userInteraction": "REQUIRED",
"attackComplexity": "LOW",
"availabilityImpact": "NONE",
"privilegesRequired": "HIGH",
"confidentialityImpact": "HIGH"
},
"impactScore": 4,
"exploitabilityScore": 1.2
},
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.1",
"baseScore": 8,
"attackVector": "ADJACENT_NETWORK",
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"integrityImpact": "HIGH",
"userInteraction": "NONE",
"attackComplexity": "LOW",
"availabilityImpact": "HIGH",
"privilegesRequired": "LOW",
"confidentialityImpact": "HIGH"
},
"impactScore": 5.9,
"exploitabilityScore": 2.1
}
]
},
"affected": [
{
"source": "security-advisories@github.com",
"affectedData": [
{
"vendor": "tailscale",
"product": "tailscale",
"versions": [
{
"status": "affected",
"version": ">= 1.34.0, < 1.38.2"
}
]
}
]
}
],
"published": "2023-03-23T20:15:15.487",
"references": [
{
"url": "https://github.com/tailscale/tailscale/commit/d00c046b723dff6e3775d7d35f891403ac21a47d",
"tags": [
"Patch"
],
"source": "security-advisories@github.com"
},
{
"url": "https://github.com/tailscale/tailscale/releases/tag/v1.38.2",
"tags": [
"Patch",
"Release Notes"
],
"source": "security-advisories@github.com"
},
{
"url": "https://github.com/tailscale/tailscale/security/advisories/GHSA-vfgq-g5x8-g595",
"tags": [
"Mitigation",
"Vendor Advisory"
],
"source": "security-advisories@github.com"
},
{
"url": "https://tailscale.com/security-bulletins/#ts-2023-003",
"tags": [
"Vendor Advisory"
],
"source": "security-advisories@github.com"
},
{
"url": "https://github.com/tailscale/tailscale/commit/d00c046b723dff6e3775d7d35f891403ac21a47d",
"tags": [
"Patch"
],
"source": "af854a3a-2127-422b-91ae-364da2661108"
},
{
"url": "https://github.com/tailscale/tailscale/releases/tag/v1.38.2",
"tags": [
"Patch",
"Release Notes"
],
"source": "af854a3a-2127-422b-91ae-364da2661108"
},
{
"url": "https://github.com/tailscale/tailscale/security/advisories/GHSA-vfgq-g5x8-g595",
"tags": [
"Mitigation",
"Vendor Advisory"
],
"source": "af854a3a-2127-422b-91ae-364da2661108"
},
{
"url": "https://tailscale.com/security-bulletins/#ts-2023-003",
"tags": [
"Vendor Advisory"
],
"source": "af854a3a-2127-422b-91ae-364da2661108"
}
],
"vulnStatus": "Modified",
"weaknesses": [
{
"type": "Secondary",
"source": "security-advisories@github.com",
"description": [
{
"lang": "en",
"value": "CWE-269"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules.\n\nTailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used.\n\nAffected users should upgrade to version 1.38.2 to remediate the issue.\n\n"
}
],
"lastModified": "2026-06-17T05:47:44.060",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:a:tailscale:tailscale:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "627EF495-6BE7-4E49-95B1-2F6F67C153EF",
"versionEndExcluding": "1.38.2",
"versionStartIncluding": "1.34"
}
],
"operator": "OR"
}
]
}
],
"sourceIdentifier": "security-advisories@github.com"
}