CVE-2018-19982
An issue was discovered on KT MC01507L Z-Wave S0 devices. It occurs because HPKP is not implemented. The communication architecture is APP > Server > Controller (HUB) > Node (products which are controlled by HUB). The prerequisite is that the attacker is on the same network as the target HUB, and can use IP Changer to change destination IP addresses (of all packets whose destination IP address is Server) to a proxy-server IP address. This allows sniffing of cleartext between Server and Controller. The cleartext command data is transmitted to Controller using the proxy server's fake certificate, and it is able to control each Node of the HUB. Also, by operating HUB in Z-Wave Pairing Mode, it is possible to obtain the Z-Wave network key.
CVSS
- Versión: 3.0
- Vector: CVSS:3.0/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N
- Puntuación base: 5.3
Probabilidad de explotación (EPSS)
- Probabilidad de explotación en los próximos 30 días: 0.22%
- Percentil entre todas las CVEs puntuadas: 12
- Fecha de la puntuación: 7/10/2026
EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).
Tecnologías afectadas (1)
CWE
- CWE-295
Referencias
JSON original (NVD)
Mostrar
{
"id": "CVE-2018-19982",
"cveTags": [],
"metrics": {
"cvssMetricV2": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"version": "2.0",
"baseScore": 2.9,
"accessVector": "ADJACENT_NETWORK",
"vectorString": "AV:A/AC:M/Au:N/C:P/I:N/A:N",
"authentication": "NONE",
"integrityImpact": "NONE",
"accessComplexity": "MEDIUM",
"availabilityImpact": "NONE",
"confidentialityImpact": "PARTIAL"
},
"acInsufInfo": false,
"impactScore": 2.9,
"baseSeverity": "LOW",
"obtainAllPrivilege": false,
"exploitabilityScore": 5.5,
"obtainUserPrivilege": false,
"obtainOtherPrivilege": false,
"userInteractionRequired": false
}
],
"cvssMetricV30": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"cvssData": {
"scope": "UNCHANGED",
"version": "3.0",
"baseScore": 5.3,
"attackVector": "ADJACENT_NETWORK",
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.0/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
"integrityImpact": "NONE",
"userInteraction": "NONE",
"attackComplexity": "HIGH",
"availabilityImpact": "NONE",
"privilegesRequired": "NONE",
"confidentialityImpact": "HIGH"
},
"impactScore": 3.6,
"exploitabilityScore": 1.6
}
]
},
"affected": [
{
"source": "cve@mitre.org",
"affectedData": [
{
"vendor": "n/a",
"product": "n/a",
"versions": [
{
"status": "affected",
"version": "n/a"
}
]
}
]
}
],
"published": "2018-12-09T19:29:00.483",
"references": [
{
"url": "https://github.com/min1233/CVE/blob/master/1",
"tags": [
"Third Party Advisory"
],
"source": "cve@mitre.org"
},
{
"url": "https://github.com/min1233/CVE/blob/master/1",
"tags": [
"Third Party Advisory"
],
"source": "af854a3a-2127-422b-91ae-364da2661108"
}
],
"vulnStatus": "Modified",
"weaknesses": [
{
"type": "Primary",
"source": "nvd@nist.gov",
"description": [
{
"lang": "en",
"value": "CWE-295"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "An issue was discovered on KT MC01507L Z-Wave S0 devices. It occurs because HPKP is not implemented. The communication architecture is APP > Server > Controller (HUB) > Node (products which are controlled by HUB). The prerequisite is that the attacker is on the same network as the target HUB, and can use IP Changer to change destination IP addresses (of all packets whose destination IP address is Server) to a proxy-server IP address. This allows sniffing of cleartext between Server and Controller. The cleartext command data is transmitted to Controller using the proxy server's fake certificate, and it is able to control each Node of the HUB. Also, by operating HUB in Z-Wave Pairing Mode, it is possible to obtain the Z-Wave network key."
},
{
"lang": "es",
"value": "Se ha descubierto un problema en dispositivos KT MC01507L Z-Wave S0. Ocurre debido a que HPKP no está implementado. La arquitectura de la comunicación es APP >Servidor>Controlador (HUB) >Nodo (productos controlados por el HUB). El prerrequisito es que el atacante esté en la misma red que el HUB objetivo y que pueda emplear IP Changer para cambiar las direcciones IP de destino (de todos los paquetes cuya dirección IP de destino es Servidor) a una dirección IP proxy-servidor. Esto permite el rastreo de texto claro entre el Servidor y el Controlador. Los datos de comandos en texto claro se transmiten al Controlador mediante el certificado falso del servidor del proxy y pueden controlar cada Nodo del HUB. Además, al operar el HUB en modo Z-Wave Pairing, es posible obtener la clave de red Z-Wave."
}
],
"lastModified": "2026-06-17T01:50:13.987",
"configurations": [
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:powermanager:kt_mc01507l_z-wave_s0_firmware:-:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "2EF5D129-FCD7-45D0-AFFE-F3865C76D6AF"
}
],
"operator": "OR"
},
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:h:powermanager:kt_mc01507l_z-wave_s0:-:*:*:*:*:*:*:*",
"vulnerable": false,
"matchCriteriaId": "5DA6B243-5D29-4F8E-AABC-E9BFDF21FB49"
}
],
"operator": "OR"
}
],
"operator": "AND"
}
],
"sourceIdentifier": "cve@mitre.org"
}