« Volver al listado

CVE-2017-8335

Estado: ModificadaAlta (8)—

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user.

Leer descripción completaMostrar menos

While processing this request, the device calls a function named "getCfgToHTML" at address 0x004268A8 which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function "getCfgToHTML" at address 0x00426924 and this results in overflowing the buffer due to "strcat" function that is utilized by this function.

CVSS

Probabilidad de explotación (EPSS)

EPSS (Exploit Prediction Scoring System, de FIRST) estima la probabilidad de que una vulnerabilidad sea explotada en 30 días. Complementa a CVSS (impacto) y a CISA KEV (explotación confirmada).

Tecnologías afectadas (3)

Securifi — Almond+firmwareSecurifi — Almond 2015 FirmwareSecurifi — Almond Firmware

CWE

Referencias

JSON original (NVD)

Mostrar
{
  "id": "CVE-2017-8335",
  "cveTags": [],
  "metrics": {
    "cvssMetricV2": [
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "version": "2.0",
          "baseScore": 6,
          "accessVector": "NETWORK",
          "vectorString": "AV:N/AC:M/Au:S/C:P/I:P/A:P",
          "authentication": "SINGLE",
          "integrityImpact": "PARTIAL",
          "accessComplexity": "MEDIUM",
          "availabilityImpact": "PARTIAL",
          "confidentialityImpact": "PARTIAL"
        },
        "acInsufInfo": false,
        "impactScore": 6.4,
        "baseSeverity": "MEDIUM",
        "obtainAllPrivilege": false,
        "exploitabilityScore": 6.8,
        "obtainUserPrivilege": false,
        "obtainOtherPrivilege": false,
        "userInteractionRequired": true
      }
    ],
    "cvssMetricV30": [
      {
        "type": "Primary",
        "source": "nvd@nist.gov",
        "cvssData": {
          "scope": "UNCHANGED",
          "version": "3.0",
          "baseScore": 8,
          "attackVector": "NETWORK",
          "baseSeverity": "HIGH",
          "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H",
          "integrityImpact": "HIGH",
          "userInteraction": "REQUIRED",
          "attackComplexity": "LOW",
          "availabilityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "confidentialityImpact": "HIGH"
        },
        "impactScore": 5.9,
        "exploitabilityScore": 2.1
      }
    ]
  },
  "affected": [
    {
      "source": "cve@mitre.org",
      "affectedData": [
        {
          "vendor": "n/a",
          "product": "n/a",
          "versions": [
            {
              "status": "affected",
              "version": "n/a"
            }
          ]
        }
      ]
    }
  ],
  "published": "2019-06-18T19:15:10.763",
  "references": [
    {
      "url": "http://packetstormsecurity.com/files/153227/Securifi-Almond-2015-Buffer-Overflow-Command-Injection-XSS-CSRF.html",
      "tags": [
        "Third Party Advisory",
        "VDB Entry"
      ],
      "source": "cve@mitre.org"
    },
    {
      "url": "https://github.com/ethanhunnt/IoT_vulnerabilities/blob/master/Securifi_Almond_plus_sec_issues.pdf",
      "tags": [
        "Exploit",
        "Third Party Advisory"
      ],
      "source": "cve@mitre.org"
    },
    {
      "url": "https://seclists.org/bugtraq/2019/Jun/8",
      "tags": [
        "Mailing List",
        "Third Party Advisory"
      ],
      "source": "cve@mitre.org"
    },
    {
      "url": "http://packetstormsecurity.com/files/153227/Securifi-Almond-2015-Buffer-Overflow-Command-Injection-XSS-CSRF.html",
      "tags": [
        "Third Party Advisory",
        "VDB Entry"
      ],
      "source": "af854a3a-2127-422b-91ae-364da2661108"
    },
    {
      "url": "https://github.com/ethanhunnt/IoT_vulnerabilities/blob/master/Securifi_Almond_plus_sec_issues.pdf",
      "tags": [
        "Exploit",
        "Third Party Advisory"
      ],
      "source": "af854a3a-2127-422b-91ae-364da2661108"
    },
    {
      "url": "https://seclists.org/bugtraq/2019/Jun/8",
      "tags": [
        "Mailing List",
        "Third Party Advisory"
      ],
      "source": "af854a3a-2127-422b-91ae-364da2661108"
    }
  ],
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "type": "Primary",
      "source": "nvd@nist.gov",
      "description": [
        {
          "lang": "en",
          "value": "CWE-119"
        }
      ]
    }
  ],
  "descriptions": [
    {
      "lang": "en",
      "value": "An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the \"mssid_1\" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function named \"getCfgToHTML\" at address 0x004268A8 which retrieves the value set earlier by \"mssid_1\" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary \"goahead\" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter \"mssid_1\" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function \"getCfgToHTML\" at address 0x00426924 and this results in overflowing the buffer due to \"strcat\" function that is utilized by this function."
    },
    {
      "lang": "es",
      "value": "Se descubrió un problema en los dispositivos Securifi Almond, Almond + y Almond 2015 con firmware AL-R096. El dispositivo proporciona al usuario la capacidad de configurar el nombre de la red inalámbrica. Estos valores son almacenados por el dispositivo en NVRAM (RAM no volátil). Parece que los parámetros POST pasados en esta solicitud para configurar nombres en el dispositivo no tienen una verificación de longitud de cadena en ellos. Esto permite que un atacante envíe una gran carga útil en el parámetro POST \"mssid_1\". El dispositivo también permite que un usuario vea el nombre de la red Wifi configurada por el usuario. Mientras procesa esta solicitud, el dispositivo llama a una función llamada \"getCfgToHTML\" en la dirección 0x004268A8 que recupera el valor establecido anteriormente por el parámetro \"mssid_1\" como SSID2 y este valor produce un desbordamiento de la configuración de pila para esta función y permite que un atacante controle Valor de registro de $ra en la pila que permite a un atacante controlar el dispositivo ejecutando una carga útil a elección del atacante. Si la versión de firmware AL-R096 se disecciona con la herramienta binwalk, obtenemos un archivo cpio-root que contiene el sistema de archivos configurado en el dispositivo que contiene todos los archivos binarios. El binario \"goahead\" es el que tiene la función vulnerable que recibe los valores enviados por la solicitud POST. Si abrimos este binario en IDA-pro, notaremos que esto sigue un formato MIPS little endian. La función sub_00420F38 en IDA pro está identificada para recibir los valores enviados en el parámetro POST \"mssid_1\" en la dirección 0x0042BA00 y luego se establece en la NVRAM en la dirección 0x0042C314. El valor se recupera posteriormente en la función \"getCfgToHTML\" en la dirección 0x00426924 y esto provoca el desbordamiento del búfer debido a la función \"strcat\" que utiliza esta función."
    }
  ],
  "lastModified": "2026-06-17T01:26:12.060",
  "configurations": [
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:securifi:almond_2015_firmware:al-r096:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "208D57C5-306D-4759-9A80-9FC41EAABAF9"
            }
          ],
          "operator": "OR"
        },
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:securifi:almond_2015:-:*:*:*:*:*:*:*",
              "vulnerable": false,
              "matchCriteriaId": "927187D5-C000-4DC3-BECA-7872D2294820"
            }
          ],
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:securifi:almond\\+firmware:al-r096:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "006ED0DA-A55E-419B-ADE6-F116A64DBE45"
            }
          ],
          "operator": "OR"
        },
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:securifi:almond\\+:-:*:*:*:*:*:*:*",
              "vulnerable": false,
              "matchCriteriaId": "D3472E5F-5B79-4D36-B6AF-DFAE3021B803"
            }
          ],
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:securifi:almond_firmware:al-r096:*:*:*:*:*:*:*",
              "vulnerable": true,
              "matchCriteriaId": "43B428E1-51D5-48DA-B852-93434A9A8945"
            }
          ],
          "operator": "OR"
        },
        {
          "negate": false,
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:securifi:almond:-:*:*:*:*:*:*:*",
              "vulnerable": false,
              "matchCriteriaId": "1EF61C46-EE6E-4592-B912-93D733A82095"
            }
          ],
          "operator": "OR"
        }
      ],
      "operator": "AND"
    }
  ],
  "sourceIdentifier": "cve@mitre.org"
}